Close

Search

Search Menu
Photonics Media Photonics Buyers' Guide Photonics Spectra BioPhotonics EuroPhotonics Vision Spectra Photonics Showcase Photonics ProdSpec Photonics Handbook

Simpler and Faster Microscopy Enables Broad Biomedical Applications

Facebook Twitter LinkedIn Email Comments
PASADENA, Calif., Aug. 20, 2020 — A research team led by Lihong Wang of the California Institute of Technology has developed a two-dimensional multifocal optical resolution photoacoustic microscopy (MFOR-PAM) system using a 2D microlens array for optical excitation, and an acoustic ergodic relay to simultaneously detect the photoacoustic (PA) responses to the multifocal optical illuminations with a single element ultrasonic transducer. The system, referred to as multifocal optical-resolution photoacoustic microscopy through an ergodic relay (MFOR-PAMER), can shorten the scanning time by at least 400× compared to conventional OR-PAM systems at the same imaging resolution, while maintaining a simple and economic setup.
(a) AR-PAMER image. (b) MFOR-PAMER image. AR, acoustic resolution; MFOR, multifocal optical resolution; All scale bars, 1 mm. Courtesy of Caltech.
(a) AR-PAMER image. (b) MFOR-PAMER image. AR, acoustic resolution; MFOR, multifocal optical resolution; All scale bars, 1 mm. Courtesy of Caltech.

The novel MFOR-PAM system is centered around a key enabling element known as the acoustic ergodic relay. For photoacoustic imaging an ergodic relay — such as a light-transparent prism — can be used as an encoder to transform PA signals from different input positions into unique temporal signals. By recording the system impulse response of each input position in advance, the PA signals from the entire field of view can be detected in parallel upon a single laser shot. Then, the encoded PA signals can be decoded mathematically to reconstruct a 2D-projection image of the object.

The system uses a microlens array to focus a wide-field laser beam into multiple optical focal points. Unlike a conventional focusing lens that needs to scan a single optical point across the entire field of view, the microlens array can reduce the time required to form an image by scanning multiple spots at once.

According to the researchers, the system has potential for numerous biomedical applications, such as UV illumination for high-speed, label-free histological study of biological tissues. The design can reduce imaging time from several hours to less than a minute, making its application more practical.

The research was published in Light: Science & Applications (www.doi.org/10.1038/s41377-020-00372-x).

Photonics.com
Aug 2020
MicroscopyCaltechlensesmicrolensBiophotonicsimagingultravioletultraviolet lightphotoacousticResearch & Technology

Comments
back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2020 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA, [email protected]

Photonics Media, Laurin Publishing
x We deliver – right to your inbox. Subscribe FREE to our newsletters.
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.