Search Menu
Photonics Media Photonics Buyers' Guide Photonics EDU Photonics Spectra BioPhotonics EuroPhotonics Industrial Photonics Photonics Showcase Photonics ProdSpec Photonics Handbook
More News
Email Facebook Twitter Google+ LinkedIn Comments

Soft Lithography Reproduces Microlenses

Photonics Spectra
May 2003
Daniel S. Burgess

As we move from the electronics to the photonics age, micro-optics are finding a place in more and more applications. Now researchers have introduced a soft lithography process that they hope will enable the low-cost, mass production of microlenses for applications such as telecommunications, optical memory and imaging.

Soft Lithography Reproduces Microlenses
Using a soft lithography process, researchers are reproducing arrays of microlenses. The approach promises to reduce manufacturing costs by replicating lenses from a high-quality master.

Several approaches exist for fabricating microlenses, but optical quality tends to come at the price of process complexity and higher expense. Soft lithography strikes a balance, by requiring the production of only one high-quality master from which many low-cost copies may be duplicated.

"The main driving force behind this work was cost and reliability," said Madanagopal V. Kunnavakkam, a senior research associate at Cornell University's Alliance for Nanomedical Technologies in Ithaca, N.Y. Photoresist reflow with dry etching, for example, yields excellent spherical surfaces, but this is an expensive process. It would be more advantageous if a few good lenses could be made using the reflow techniques and then replicated at a fraction of the cost.

Soft Lithography Reproduces Microlenses
In a demonstration of the technique, the team produced arrays of 1-mm-diameter lenses. Scanning optical profilometry and loss measurements indicated that the process yields elements with physical and optical characteristics comparable to those of the originals.

Moreover, the available techniques are not suitable for the production of lenses for all applications. The reflow process and ink-jet techniques have difficulties fabricating aspherical elements. "Multilevel lithography needs to be used to pattern the desired surface," he said. "Here, the replication process can be used to manufacture them once a good master has been fabricated."

In the new approach, the scientists coat a microlens array with trichlorosilane, an antistiction agent, and place it in a similarly treated petri dish. A quartz plate is stacked atop the master, separated by 1-mm-thick spacers, and dimethylsiloxane monomer with a polymerizing catalyst is poured into the dish. Oven curing and removal from the dish yield a negative mold of the master in polydimethylsiloxane attached to the quartz plate, which minimizes thermal distortion of the elastomer.

To reproduce lenses, they fill the cavities with a UV-curable epoxy that is loaded with 9- to 11-nm-diameter functionalized silica nanoparticles to improve the mechanical properties of the finished lenses and to lower moisture absorption. Then they gently place a quartz plate on top of the filled cavities to serve as a backing. After the curing process, they remove the plate, freeing the replicated lenses.

To verify the optical quality of the lenses, the researchers measured the surface profiles, lattice spacing, focal lengths and insertion loss of the masters and two batches of replicas. They found that the focal length distribution and insertion loss of the replicas were comparable to those of the masters. Oven curing the molds at 40 °C for 24 hours rather than at 65 °C for five hours, however, better reproduced the lattice spacing of the master.

Kunnavakkam noted that one issue the scientists face in developing the technique is the formation of bubbles in the epoxy. "The epoxy is rather viscous, and any bubble trapped during its manufacture tends to remain unless removed under vacuum," he said. To eliminate air inclusions, they have employed a vacuum dispenser but would like to automate this process. "To minimize human handling, some sort of an automated vacuum dispensing system that can drop measured quantities of the epoxy into the stamps would be useful."

Tiny (less than 2 mm in diameter) lenses, beamsplitters and other optical components used, for example, in endoscopes or microscopes or to focus light from semiconductor lasers and optical fibers.
optical memory
1. The direct storage of data as bits in memory using optical systems and properties. The memory makes use of a laser beam that is divided by a beamsplitter and controlled by a modulator and a deflector to transpose bits into a given area of storage in memory. On the other side of the memory plane, a laser and a deflector read the memory, bit by bit, the bits being read by a scanning photodetector. Erasure is accomplished by writing with the beam at a different wavelength. 2. The ability of a...
ApplicationsCommunicationsimagingindustrialmicro-opticsmicrolensesoptical memoryResearch & Technologysoft lithography processTech Pulsetelecommunications

Terms & Conditions Privacy Policy About Us Contact Us
back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2018 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA,

Photonics Media, Laurin Publishing
x Subscribe to Photonics Spectra magazine - FREE!
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.