Search Menu
Photonics Media Photonics Marketplace Photonics Spectra BioPhotonics EuroPhotonics Vision Spectra Photonics Showcase Photonics ProdSpec Photonics Handbook

Solar Cells Slimmed with Nanosandwich

Facebook Twitter LinkedIn Email Comments
RALEIGH, N.C., June 28, 2012 — A new technique to fabricate slimmer thin-film solar cells without compromising their ability to absorb solar energy could reduce production costs for the technology.

North Carolina State University researchers fabricated the solar cells utilizing a “nanoscale sandwich” design that involves an ultrathin “active” layer of amorphous silicon only 70 nm thick. Typical thin-film solar cells that also use amorphous silicon have active layers between 300 and 500 nm thick.

“The technique we’ve developed is very important because it can be generally applied to many other solar cell materials, such as cadmium telluride, copper indium gallium selenide and organic materials,” said Dr. Linyou Cao, an assistant professor of materials science and engineering.

In solar cells, energy is absorbed by the active layer for conversion into chemical fuel or electricity. This new technique relies on traditional production processes but results in a totally different end product.

Researchers from North Carolina State University have found a way to create much slimmer thin-film solar cells without sacrificing the cells’ ability to absorb solar energy. The active layer can be as little as 70 nm thick. (Image: Dr. Linyou Cao, North Carolina State University)

To create the cells, the scientists used a standard lithography technique to form a pattern on the substrate, outlining structures composed of transparent dielectric material with dimensions of 200 to 300 nm. Next, an ultrathin amorphous silicon active layer is coated over the substrate and the nanostructures, and this active layer is coated with another dielectric material layer.

“One key aspect of this technique is the design of the ‘nanoscale sandwich,’ with the active materials in the middle of two dielectric layers,” Cao said.

The dielectric nanostructures below the active layer form a thin film featuring elevated, uniformly spaced surfaces resembling crenellations over a medieval castle.

“The nanostructures act as very efficient optical antennas, focusing the solar energy into the active material,” he said. “This focusing means we can use a thinner active layer without sacrificing performance."

The research, supported in part by the US Department of Energy, was published online by Nano Letters.

For more information, visit:
Jun 2012
The technology of generating and harnessing light and other forms of radiant energy whose quantum unit is the photon. The science includes light emission, transmission, deflection, amplification and detection by optical components and instruments, lasers and other light sources, fiber optics, electro-optical instrumentation, related hardware and electronics, and sophisticated systems. The range of applications of photonics extends from energy generation to detection to communications and...
Americasamorphous siliconcadmium tellurideCopper Indium Gallium Selenideenergygreen photonicsindustrialLinyou Caonanonanosandwichnanoscale sandwichnanostructuresNorth CarolinaNorth Carolina State UniversityphotonicsphotovoltaicsPV CellsResearch & Technologyslimmer thin film solar cellssolar cell active layersolar cellsthin film solar cellsultrathin amorphous silicon active layerUS Department of Energy

back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2020 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA, [email protected]

Photonics Media, Laurin Publishing
x We deliver – right to your inbox. Subscribe FREE to our newsletters.
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.