Solid-State Optical Cryocooler Refrigerates an IR Sensor to 135 K

Facebook X LinkedIn Email
ALBUQUERQUE and LOS ALAMOS, N.M., June 22, 2018 — Researchers have demonstrated an all-solid-state optical cryocooler. The structure, which according to researchers is the first demonstration of laser cooling of a payload connected to a cooling crystal, could serve as a baseline for future optical crycooler devices.

Solid-state laser cooling is achieved using anti-Stokes fluorescence — a process in which the average wavelength of the fluorescence emitted by a material is shorter than the wavelength of the laser used for excitation. Anti-Stokes fluorescence cools macroscopic objects to cryogenic temperatures without vibrations.

The all-solid-state optical cryocooler has several key components. First, a high-quality YLF:Yb crystal was used to provide efficient cooling at the heart of the cryocooler. Second, a thermomechanically reliable van der Waals bond was created between Yb3+-doped and undoped YLF (yttrium lithium fluoride), and this allowed the incorporation of a transparent thermal link without the use of optical adhesives. This thermal link was then attached to a cold finger, which allowed cooling of an arbitrary payload. Third, use of hydrophobic silica aerogels provided excellent thermal insulation and sufficient mechanical strength to support the laser-cooled assembly.

 First demonstration of an all solid state optical cryocooler, University of New Mexico and Los Alamos National Laboratory.

The laser-cooling material (blue) is placed inside an astigmatic Herriott cell to enable multipass excitation by the pump laser. The sensor payload (red) is connected by a cold finger (black), mirror (gray), and thermal link (green) to the laser-cooling material. A support element (purple) provides the mounting of this assembly within a closely fitting clamshell (orange), which is lined with a low-emissivity coating (olive) and mounted onto a liquid-cooled base (dark red). The cryocooler is contained within a vacuum chamber (gray box). Courtesy of University of New Mexico and Los Alamos National Laboratory.

For the experiment, a research team from the University of New Mexico and Los Alamos National Laboratory placed a YLF:Yb crystal inside a Herriott cell and pumped it with a 1020-nm laser to cool a mercury cadmium telluride (HgCdTe) sensor, which was part of a working Fourier transform infrared (FTIR) spectrometer, to 135 K. 

Fluorescence heating of the payload was minimized by using a single-kink YLF thermal link between the YLF:Yb cooling crystal and the copper coldfinger that held the HgCdTe sensor. The adhesive-free bond between YLF and YLF:Yb showed excellent thermal reliability.

This laser-cooled assembly was supported by silica aerogel cylinders inside a vacuum clamshell to minimize undesired conductive and radiative heat loads from the warm surroundings.

According to researchers, the cryocooler is the only solid-state cooling device that works in the cryogenic regime, that is, in the temperature range of liquid cryogens with a boiling point of 166 K.

Thermoelectric coolers, the most common solid-state refrigerators, cannot achieve temperatures nearly as low as 135 K. 

The research team believes that the use of solid-state optical refrigeration to cool a payload to cryogenic temperatures represents a breakthrough, and that the technology could be used to provide reliable cryogenic refrigeration, without moving parts and associated vibrations, for a variety of applications.

The research was published in Light: Science & Applications (doi:10.1038/s41377-018-0028-7). 


Published: June 2018
solid-state laser
A solid-state laser is a type of laser that uses a solid gain medium (as opposed to a liquid or gas) to produce coherent light. The term "solid-state" refers to the fact that the active medium, where the lasing action occurs, is a solid material. This material is typically a crystalline or glass-like substance doped with specific ions or atoms that can undergo stimulated emission to generate laser light. The basic components of a solid-state laser include: Gain medium: This is the solid...
laser cooling
A process and method by which manipulation and orientation of a given number of directed laser beams decreases the motion of a group of atoms or molecules such that their internal thermodynamic temperatures reach near absolute zero. The 1997 Nobel Prize in Physics was awarded to Steven Chu, Claude Cohen-Tannoudji and William D. Phillips for the development of methods to cool and trap atoms with laser light.
Research & TechnologyAmericaseducationLasersOpticsoptical cryocoolerSensors & Detectorssolid-state laserlaser coolingoptical refrigerationenergyindustrial

We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.