Search
Menu
LPC/Photonics.com - Stay-Up-To-Date

Source Mask Optimization Fine-tunes Extreme UV Lithography

Facebook X LinkedIn Email
Researchers from the Shanghai Institute of Optics and Fine Mechanics of the Chinese Academy of Sciences proposed a source mask optimization (SMO) technique for extreme-ultraviolet lithography (EUVL) based on a thick mask model and a social learning particle swarm optimization (SL-PSO) algorithm.

Simulations of the method suggested that the technique is more effective than similar approaches based on heuristic algorithms in optimization efficiency.

With the continuous shrinking of the critical dimension of integrated circuits, the researchers said, precision and optimal performance requirements have become more stringent. Computational lithography improves performance without changing the hardware or software configurations of the lithography systems themselves, instead improving their performance by optimizing the present light source, mathematical models, and algorithms.

SMO, a method of computational lithography, optimizes the source of illumination and the mask pattern simultaneously to improve the quality of imaging.

EUVL has been applied to high-volume manufacturing of 5-nm process nodes, and SMO is critical to this technology’s capabilities.

Seeking to improve the technique, the researchers proposed an SMO method for EUVL based on the thick mask model and SL-PSO algorithm. The method that the researchers tested in their simulation used the fast thick model based on a structure decomposition method (SDM). SDM calculates the mask spectrum by describing the propagation of incident light in the absorber and the multilayer.

Though SDM has been studied extensively, the researchers said it has not been studied extensively with a pixelated phase mask — itself a resolution enhancement technique.

Zurich Instruments AG - Boost Your Optics 1-24 MR

The SL-PSO algorithm optimized the source and mask pattern, and the social learning strategy improved system efficiency. Additionally, a tuned initialization parameter controlled the initial swarm in the algorithm. This improved the mask’s manufacturability.

The simulation results showed that the method was demonstrated to be faster and more efficient than other heuristic algorithms. Pattern error is significantly reduced and the imaging fidelity is improved. Simulations using patterns located at different positions of the ring slit showed that the method not only improved the imaging fidelity but also alleviated the shadowing effect.

Future research will be focused on improving the optimization efficiency with increased numbers of mask pixels, as well as eliminating the pattern shift at the wafer defocus plane.

The research was published in Optics Express (www.doi.org/10.1364/OE.418242).


Published: March 2021
Glossary
lithography
Lithography is a key process used in microfabrication and semiconductor manufacturing to create intricate patterns on the surface of substrates, typically silicon wafers. It involves the transfer of a desired pattern onto a photosensitive material called a resist, which is coated onto the substrate. The resist is then selectively exposed to light or other radiation using a mask or reticle that contains the pattern of interest. The lithography process can be broadly categorized into several...
ultraviolet
That invisible region of the spectrum just beyond the violet end of the visible region. Wavelengths range from 1 to 400 nm.
extreme ultraviolet
Extreme ultraviolet (EUV) refers to a specific range of electromagnetic radiation in the ultraviolet part of the spectrum. EUV radiation has wavelengths between 10 and 124 nanometers, which corresponds to frequencies in the range of approximately 2.5 petahertz to 30 exahertz. This range is shorter in wavelength and higher in frequency compared to the far-ultraviolet and vacuum ultraviolet regions. Key points about EUV include: Source: EUV radiation is produced by extremely hot and energized...
mask
1. A framelike structure that serves to restrict the viewing area of the screen when placed before a television picture tube. 2. In photolithography, a photomask (or mask) is typically a patterned transparent plate or an opaque plate with patterned holes or transparencies that uses a laser light source to transfer and print the pattern by an etching process onto a substrate that is typically a silicon wafer used in integrated circuitry.
Research & Technologylithographyextreme UVultravioletultraviolet (EUV) lithographyultraviolet lightextreme ultravioletextreme ultraviolet lithographymasksource mask optimizationSMOChinese Academy of SciencesChinese Academy of ScienceShanghai Institute of OpticsShanghai Institute of Optics and Fine MechanicsAsia-PacificOptics ExpressTech Pulse

We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.