Search Menu
Photonics Media Photonics Buyers' Guide Photonics EDU Photonics Spectra BioPhotonics EuroPhotonics Industrial Photonics Photonics Showcase Photonics ProdSpec Photonics Handbook
More News
Email Facebook Twitter Google+ LinkedIn Comments

Stamping technique enables cheaper nanodevices

Photonics Spectra
Aug 2011
Compiled by Photonics Spectra staff

A simple technique for stamping patterns invisible to the human eye onto a special class of nanomaterials provides a new, cost-effective way to produce novel devices for a wide range of applications, including drug delivery, chemical and biological sensors, solar cells and battery electrodes.

The technique, developed by Vanderbilt University engineers, works with porous nanomaterials riddled with tiny voids that give them unique optical, electrical, chemical and mechanical properties. There are nanoporous forms of gold, silicon, aluminum and titanium oxide, among others.

Until recently, the processing that was required to transform these materials into devices was complex and expensive. Now, the researchers have developed a rapid, low-cost imprinting process that can stamp out a variety of nanodevices from the materials. They used a regular tabletop vise for their first successful imprint.

Vanderbilt graduate student Jason Ryckman demonstrates the operation of a new diffraction-based biosensor that is produced out of a nanoporous material by a new imprinting process. Courtesy of Anne Raynor, Vanderbilt University.

Traditionally, devices were made from nanoporous materials in a process similar to that used for computer chips: painting the surface with a resist, exposing it to ultraviolet light or scanning the surface with an electron beam to create the desired pattern, and then applying a series of chemical treatments to either engrave the surface or lay down new material. The more complex the design, the longer it would take to make.

Sharon M. Weiss, associate professor of electrical engineering, got the idea about two years ago to create premastered stamps using the complex process and then using the stamps to create the devices. The new approach, direct imprinting of porous substrates, can create a device in less than a minute, regardless of its complexity. The group reports that, so far, it has used master stamps more than 20 times without any signs of deterioration. Their smallest pattern has features of only a few tens of nanometers. In addition, they have succeeded in imprinting the smallest pattern yet reported in nanoporous gold, one with 70-nm features.

The first device the group made is a diffraction-based biosensor that can be configured to identify a variety of organic molecules, including DNA, proteins and viruses.

The group collaborated with colleagues in the chemical and biomolecular engineering departments to use the new technique to make nanopatterned chemical sensors 10 times more sensitive than another type of commercial chemical sensor called Klarite – the basis of a multimillion dollar market.

Details of the work appeared in the May 2011 issue of Nano Letters (doi: 10.1021/ nl1028073).

An instrument consisting essentially of a tube 160 mm long, with an objective lens at the distant end and an eyepiece at the near end. The objective forms a real aerial image of the object in the focal plane of the eyepiece where it is observed by the eye. The overall magnifying power is equal to the linear magnification of the objective multiplied by the magnifying power of the eyepiece. The eyepiece can be replaced by a film to photograph the primary image, or a positive or negative relay...
Pertaining to optics and the phenomena of light.
Americasbattery electrodesbiological sensorsBiophotonicsbiosensorchemical sensorchemical sensorschemical treatmentscomputer chipsDIPSdirect imprintingdirect imprinting of porous substratesDNAdrug deliveryelectricalelectron beamenergyimaginglithium-ion battery anodemicroscopenanonanodevicesnanomaterialsnanoporous siliconopticalopticsoverstampingpattern imprintsporous nanomaterialsResearch & TechnologySensors & DetectorsSharon M. Weisssolar cellsstamping patternsTech PulseTennesseetitanium oxideVanderbilt University

Terms & Conditions Privacy Policy About Us Contact Us
back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2019 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA,

Photonics Media, Laurin Publishing
x Subscribe to Photonics Spectra magazine - FREE!
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.