Close

Search

Search Menu
Photonics Media Photonics Marketplace Photonics Spectra BioPhotonics Vision Spectra Photonics Showcase Photonics ProdSpec Photonics Handbook

Stimulated Emission Enhances Fluorescence Detection

Facebook Twitter LinkedIn Email
TAIPEI, Taiwan, March 4, 2014 — Stimulated emission (SE) can now be used to detect the signal-to-noise ratio (SNR) of fluorescence and convert it to a coherent signal.

A technique developed by a team from National Yang-Ming University’s Institute of Biophotonics Engineering induces the electronic transition of an excited fluorophore optical signal into SE before its energy dissipates through other radiative or nonradiative decay processes.

This makes the SE signals dependent on the population of the excited states and the intensity of the stimulation beam. The signals scale linearly with both excitation and stimulation beams, which give it an overall quadratic power dependence.


Scientists can now use stimulated emission to detect the signal-to-noise of fluorescence. Courtesy of National Yang-Ming University.

In this study, the researchers used destructive interference, generated by a Michelson interferometer, to reduce the high direct current (DC) background signal from the stimulation beam, thus increasing the SNR. This method reduces the direct current signal but not the SE signal. To improve the detection limit, the team reduced the stimulation beam power from 2 mW to 0.2 mW. 


In the past, the researchers established SE-based detection in long-working-distance settings by implementing the method of pump-probe with lock-in detection. This scheme can easily be used for other applications, they said, including the acquisition and reconstruction of fluorescence lifetime images by introducing an electronic delay between the pump and probe beams.

More recently, SE has been harnessed to acquire fluorescence lifetime data, improve the spatial resolution of micrographs, interrogate dark fluorophores, and detect fluorophores over a long working distance.

Now in development is the technique's potential for high-resolution 3-D biological imaging by optical coherence tomography, using fluorescence as a viable and unique contrast.

The work was funded by the National Science Council of Taiwan. It is published in Biomedical Optics & Medical Imaging.

For more information, visit www.ym.edu.tw.

Photonics.com
Mar 2014
GLOSSARY
fluorescence
The emission of light or other electromagnetic radiation of longer wavelengths by a substance as a result of the absorption of some other radiation of shorter wavelengths, provided the emission continues only as long as the stimulus producing it is maintained. In other words, fluorescence is the luminescence that persists for less than about 10-8 s after excitation.
fluorophore
Material that emits fluorescence.
stimulated emission
Radiation similar in origin to spontaneous emission but determined by the presence of other radiation having the same frequency. Because the phase and amplitude of the stimulated wave depend on the stimulating wave, this radiation is coherent with the stimulating wave. The rate of stimulated emission is proportional to the intensity of the stimulating radiation.
3-D biological imagingAsia-Pacificfluorescencefluorophoreimaginglight sourcesMicroscopyNational Yang-Ming Universityoptical coherence tomographyopticspHResearch & TechnologySensors & Detectorssignal-to-noise ratioSNRstimulated emissionTaiwanTech Pulsecellular metabolismSEInstitute of Biophotonics Engineeringcytoplasm matrix viscositymicrographs

back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2023 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA, [email protected]

Photonics Media, Laurin Publishing
x We deliver – right to your inbox. Subscribe FREE to our newsletters.
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.