Search Menu
Photonics Media Photonics Marketplace Photonics Spectra BioPhotonics Vision Spectra Photonics Showcase Photonics ProdSpec Photonics Handbook

System simultaneously uses loss, gain

Facebook Twitter LinkedIn Email
Light absorption or loss, usually seen as a disadvantage in optical metamaterials, actually can have useful applications.

Physicists at Friedrich Alexander University Erlangen-Nuremberg borrowed a concept from quantum field theory in designing a new metamaterial. By applying the abstract idea of “parity-time (PT) symmetry,” they altered the way light is transported and produced unusual optical behavior – invisibility in one direction, for example.

Previous experimental work in this area had been limited to small-scale systems; the work by Ulf Peschel and colleagues is the first experimental observation of light transport in a large-scale synthetic material.

“Our experimental results represent a step in the application of concepts from parity-time symmetry to a new generation of multifunctional optical devices and networks,” the team wrote in its paper, which appears in Nature (doi: 10.1038/nature11298).

Physicists have applied the abstract idea of “parity-time (PT) symmetry” to alter the way light is transported. Here, a spatial fiber coupler network equivalent to the temporal PT-symmetric lattice is realized in the Friedrich Alexander University experiment. Gain/loss regions are shown in red/blue. This is the first experimental observation of light transport in a large-scale synthetic material.

Currently, metamaterials are based mainly on the manipulation of light refraction in the subwavelength range, and optical invisibility cloaks work according to the same principle. Only recently did scientists discover that light propagation also can be influenced substantially by adjusting amplification and loss. This involves maintaining the PT so that light amplification and loss merge into each other in a space-time-reflection.

In their setup, the physicists injected a sequence of light pulses into two connected optical fiber loops designed to exhibit PT symmetry. By alternating gain and loss in the two loops, they attained the imaginary part of the refractive-index profile. The real component of the profile was introduced using phase modulators.

The approach “can be easily extended to on-chip configurations,” the team wrote, “paving the way for the realization of PT synthetic devices and effective media with new and unexpected optical properties.”

An artist’s illustration of experimental data demonstrating unidirectional invisibility: If the ray of light hits the medium from the left, the reflections at the red and blue scattering bodies made of PT-symmetrical material are even stronger than the ray of light itself. If the same ray of light hits the active elements from the right, the reflection is suppressed, and the ray can travel through the elements without any obstacles, which means that the scattering bodies are invisible from the right.

Similar concepts can be effectively used in other areas, such as plasmonics and metamaterials, where the harmonic coexistence of gain and loss is ultimately required, they added.

Experiments showed that in loop mirrors with controlled periodical amplification and loss, light travels fundamentally different from conventional materials. The strength of optical fields can change drastically – in certain parameter ranges, the flanks of light pulses travel beyond the speed of light.

The work was done in collaboration with scientists from the university’s Institute of Optics, Information and Photonics, the Cluster of Excellence Engineering of Advanced Materials, the Erlangen Graduate School in Advanced Optical Technologies, the Max Planck Institute for the Science of Light and the University of Central Florida.

Photonics Spectra
Oct 2012
Also known as amplification. 1. The increase in a signal that is transmitted from one point to another through an amplifier. A material that exhibits gain rather than absorption, at certain frequencies for a signal passing through it, is known as an active medium. 2. With reference to optical properties, the term may be defined in two ways: a. the relative brightness of a rear projection screen as compared with a perfect lambertian reflective diffuser; b. the ratio of brightness in footlamberts...
A material engineered from artificial matter not found in nature. The artificial makeup and design of metamaterials give them intrinsic properties not common to conventional materials that are exploited as light waves and sound waves interact with them. One of the most active areas of research involving metamaterials currently explores materials with a negative refractive index. In optics, these negative refractive index materials show promise in the fabrication of lenses that can achieve...
Pertaining to optics and the phenomena of light.
The technology of generating and harnessing light and other forms of radiant energy whose quantum unit is the photon. The science includes light emission, transmission, deflection, amplification and detection by optical components and instruments, lasers and other light sources, fiber optics, electro-optical instrumentation, related hardware and electronics, and sophisticated systems. The range of applications of photonics extends from energy generation to detection to communications and...
Basic ScienceEuropeFAUfiber opticsFriedrich Alexander University Erlangen NuremberggainGermanyinvisibility cloaklight absorptionlight transportlossMax Planckmetamaterialmirrorsopticalopticsparity-time symmetryphotonicsplasmonicsPTResearch & TechnologyTech PulseUlf PeschelUniversity of Central Florida

back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2023 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA, [email protected]

Photonics Media, Laurin Publishing
x Subscribe to Photonics Spectra magazine - FREE!
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.