Search Menu
Photonics Media Photonics Buyers' Guide Photonics EDU Photonics Spectra BioPhotonics EuroPhotonics Industrial Photonics Photonics Showcase Photonics ProdSpec Photonics Handbook
More News
Email Facebook Twitter Google+ LinkedIn Comments

The next generation of x-ray?

Jul 2009
Gary Boas,

Researchers are developing x-ray detectors that could offer improved contrast over traditional detectors and thus help reduce the possibility of radiation injury in medical imaging.

Thor-Erik Hansen and colleagues at the SINTEF Group’s Micro- and Nanotechnology Laboratory (MiNaLab) in Oslo, and at other SINTEF departments located both in Oslo and Trondheim, had been using traditional dual-energy x-ray technology for various materials characterization projects. They found, though, that the resolution was at times insufficient for detecting certain materials. Also, the scintillating detectors with photodiode readout used in their systems proved limited with respect to speed and radiation hardness.

New x-ray technology will use “edge-illuminated detectors” that can detect a greater range of particle energies and offer improved contrast over traditional x-ray systems.

The researchers are therefore developing technology in which they are replacing the dual-energy systems with fast x-ray spectroscopy. The new system will be based on “edge-illuminated detectors” that can detect a greater range of particle energies than the previously used technology. Here, when x-ray photons encounter the edge of the detector chip, they dislodge a number of electrons proportional to their energy level. The detector subsequently counts and sorts the photons based on their energy level.

The detector element will be a silicon chip covering the 5- to 200-keV range, with a typical response time of 15 ns.

Because the technology offers improved contrast, it can be used to distinguish materials with very similar densities. Hansen noted a number of applications that could benefit from its use, including materials characterization and identification, security and industrial tomography. Medical imaging applications would benefit further, he said, because the doses of x-ray energy required are lower than usual.

The system is in the early stages of development. The first step, Hansen explained, is to build a module including the x-ray optics, detector chip and application-specific integrated circuit readout, and to assemble it with cooling. This module will facilitate line scanning in spectroscopy.

The use of atoms, molecules and molecular-scale structures to enhance existing technology and develop new materials and devices. The goal of this technology is to manipulate atomic and molecular particles to create devices that are thousands of times smaller and faster than those of the current microtechnologies.
BiophotonicsdefenseindustrialnanotechnologyNews & FeaturesSensors & Detectorsspectroscopyx-ray detectors

Terms & Conditions Privacy Policy About Us Contact Us
back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2018 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA,

Photonics Media, Laurin Publishing
x Subscribe to BioPhotonics magazine - FREE!
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.