Search Menu
Photonics Media Photonics Marketplace Photonics Spectra BioPhotonics EuroPhotonics Vision Spectra Photonics Showcase Photonics ProdSpec Photonics Handbook

Tiny laser: Big challenge

Facebook Twitter LinkedIn Email Comments
Marie Freebody, [email protected]

Since the invention of lasers 50 years ago, some scientists have worked to make the new versions bigger and more powerful, while others have been in pursuit of smaller and more efficient models. Now, a group of scientists at Harvard University and Georgia Institute of Technology in Atlanta believe it has taken an important step toward creating an ultrasmall laser with what it claims is the largest spontaneous emission factor reported to date.

The hope for nanometer-scale lasers is that they will lead to the realization of compact on-chip photonic circuits. Such all-optical devices could enable a large number of components to be housed on a single chip.

When it comes to building tiny lasers, one of the most important goals is to ensure a low power threshold for energy-efficient lasing. Energy consumption is one of the key drawbacks for electronic circuits, and a power-friendly alternative in the shape of photonic integrated circuits could be just the ticket for the semiconductor industry.

Yinan Zhang, a member of the Harvard group headed by Marko Loncar, says that thanks to a novel photonic crystal cavity design, they have demonstrated a nanometer-scale laser that requires just 84 μW of power and a spontaneous emission factor of around 0.97.

“A low-power-threshold on-chip light source is one of the fundamental and critical components of a photonic integrated circuit,” he said. “Our device is able to meet the challenges of developing these circuits because it has a very small device footprint and it is power-friendly.”

In fact, the power threshold of Zhang’s group’s device is two orders of magnitude smaller than that of commercial laser diodes. The design is outlined in a paper that was published in Applied Physics Letters on Aug. 2, 2010, and is based on carefully patterning quantum wells that have been created in semiconductor materials.

The red pump beam is focused on one of the nanobeams on the chip through the optical objective. The resulting lasing beam is in the near-infrared wavelength and cannot be seen in the photo. Images courtesy of Mehmet Dundar.

First, quantum wells are grown on top of an indium phosphide (InP) substrate using metallorganic chemical vapor deposition. The quantum wells are composed of four compressively strained InGaAs layers sandwiched between InAlGaAs slabs. The quantum wells provide optical gain for the lasers and result in light emission across a wide wavelength range maximized at 1590 nm.

The quantum wells and InP substrate are then patterned and structured using nanofabrication technology.

“The structure looks like a bridge suspended on the chip. The nanobeam is only around 500 nm wide, 300 nm thick and 20 μm long,” Zhang said, adding that the small footprint enables integration of a large number of devices on a single chip.

This InP chip has the potential to accommodate hundreds of thousands of nanobeam lasers.

Because the photonic crystal nanobeam can confine light within a very small volume, the device emits a large amount of light even below the lasing threshold. Zhang describes the device as a very efficient LED below threshold, and a very efficient laser above threshold.

“Among quantum well lasers, our lasers have one of the lowest thresholds, though this threshold is still higher than most recent state-of-the-art quantum dot lasers,” he said. “But, we believe quantum well lasers will be more attractive candidates for future technologies because of their high optical gain and wide gain spectrum range.”

The team has several strategies in mind to further improve the performance of its nanolaser, one of which is to make it operate with a continuous-wave pump, which can be achieved by introducing a heat sink in the vicinity of the device. Another plan is to enable the laser to be electrically pumped, which is critical to making it compliant with industrial requirements.

Photonics Spectra
Nov 2010
all-opticalApplied Physics Letterselectronic circuitsGeorgia Institute of TechnologyHarvard UniversityInAlGaAsindium phosphideindustrialInGaAsInPMarie Freebodynanonanobeamnanolaseron-chip photonic circuitsopticsphotonic crystalphotonic integrated circuitspower thresholdquantum wellsResearch & Technologysemiconductorsspontaneous emission factorTech PulseYinan ZhangZhang

view all
Search more than 4000 manufacturers and suppliers of photonics products and services worldwide:

back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2021 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA, [email protected]

Photonics Media, Laurin Publishing
x Subscribe to Photonics Spectra magazine - FREE!
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.