Search
Menu

Topological Cavity Widens Functionality of Surface-Emitting Lasers

Facebook X LinkedIn Email
Researchers at the Institute of Physics of the Chinese Academy of Sciences have incorporated a topological cavity into the design of a surface-emitting laser to create a device that addresses the challenge of simultaneously increasing output power and beam quality in semiconductor lasers — a principal bottleneck. The research team’s topological-cavity surface-emitting laser (TCSEL) achieved 10 W of peak power, subdegree beam divergence, a 60-dB side-mode suppression ratio, and 2D multiwavelength array lasing at 1550 nm — which is considered crucial for communication and is also an eye-safe wavelength.

The TCSEL was also demonstrated to operate at any other wavelength range. The laser’s specifications and capabilities give it promise for applications, including lidar and virtual reality, as well as in communications.

The laser’s design features a cavity that the same research team previously developed, called a Dirac-vortex topological cavity. The cavity offers high single-mode selection over a large area. It was proposed to overcome the bottlenecks of semiconductor lasers and simultaneously improve output power and beam quality.

Semiconductor lasers are widely used across applications due to their compact size, high efficiency, low cost, and wide spectra.

The researchers advanced the previous work and applied the cavity to a surface-emitting laser. They evaluated its performance by comparing it to existing industrial products that use single-mode semiconductor lasers — the distributed feedback (DFB) edge-emitting laser used in internet communication and the vertical-cavity surface-emitting laser (VCSEL) that enables cellphone facial recognition. These two lasers both adopt the midgap mode in their optimized 1D resonator designs.

The TCSEL realizes the 2D version of the topological midgap mode, which the researchers said is more suited for the planar process used for the manufacture of semiconductor chips.

By changing the lattice constant, the corresponding laser wavelength varies linearly from 1512 nm to 1616 nm. Each laser in the TCSEL 2D array works stably in a single mode with a side mode suppression ratio greater than 50dB. According to the developing researchers, thr 2D multi-wavelength TCSEL arrays can potentially enhance the wavelength-division multiplexing technology for high-capacity signal transmission and multispectral sensing applications. Courtesy of the Institute of Physics of the Chinese Academy of Sciences.
By changing the lattice constant, the corresponding laser wavelength varies linearly from 1512 to 1616 nm. Each laser in the TCSEL 2D array works stably in a single mode with a side-mode suppression ratio greater than 50 dB. According to the researchers, the 2D multiwavelength TCSEL arrays can potentially enhance the wavelength-division multiplexing technology for high-capacity signal transmission and multispectral sensing applications. Courtesy of the Institute of Physics of the Chinese Academy of Sciences.
The far field of the TCSEL is a vector beam with radial polarizations. This narrow divergence, of less than 1° without collimating lenses, reduces the size, complexity, and cost of the laser system, which supports larger systems such as those used for 3D sensing. From microscopy images, the researchers clearly visualized the vortex structure from the Dirac-vortex cavity in the TCSEL.


Further, the laser’s wavelength flexibility gives the device the ability to achieve monolithic 2D multiwavelength arrays. In comparison, VCSELs generally lack wavelength tunability since the vertical cavity, which determines the lasing wavelength, is epitaxy-grown. Although DFB lasers can adjust wavelength, a DFB laser can only achieve a 1D multiwavelength array for edge emission. In contrast, the wavelength of TCSEL can be arbitrarily adjusted during the planar fabrication process.

Each laser in the 2D array also works stably in a single mode with a side-mode suppression ratio greater than 50 dB. The 2D multiwavelength TCSEL arrays can potentially enhance the wavelength-division multiplexing technology for high-capacity signal transmission and multispectral sensing applications. 

The work was supported by the CAS, the Beijing Natural Science Foundation, the Ministry of Science and Technology of China, and the Natural Science Foundation of China.

The research was published in Nature Photonics (www.doi.org/10.1038/s41566-022-00972-6).

Published: May 2022
Glossary
laser cavity
A laser cavity, also known as an optical cavity or resonator, is a fundamental component of a laser system. It is a confined region or space where light undergoes multiple reflections, leading to the amplification of coherent light. The laser cavity consists of mirrors that form the boundaries of the cavity, and it plays a crucial role in sustaining the laser action. Key components and characteristics of a laser cavity include: Mirrors: A laser cavity typically includes two mirrors, one...
cavity
In a laser, the optical resonator formed by two coaxial mirrors, one totally and one partially reflective, positioned so that laser oscillations occur.
lattice
In photonics, a lattice refers to a periodic arrangement of optical elements or structures, often on a microscopic or nanoscopic scale. These optical lattices can be created using various techniques such as lithography, etching, or deposition processes. The arrangement of these elements forms a regular grid-like pattern, analogous to the crystal lattice in solid-state physics. One common application of optical lattices is in photonic crystals, which are engineered materials with periodic...
Laserssemiconductor laser arrayssemiconductor laser cavitylaser cavityCavityResearch & TechnologyeducationInstitute of Physics of the Chinese Academy of SciencesChinese Academy of Sciencessurface emitting laserTCSELtopological cavity surface emitting laserVCSELcommunicationCommunicationsdistributed feedback (DFB) laserdistributed feedbacklaser arrayslatticelattice constant matchingTechnology News

We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.