Search Menu
Photonics Media Photonics Marketplace Photonics Spectra BioPhotonics Vision Spectra Photonics Showcase Photonics ProdSpec Photonics Handbook

Two-Stage Laser Could Make Rain, Lightning

Facebook Twitter LinkedIn Email
Weather is beyond human control — or is it?

A team from the University of Central Florida (UCF) College of Optics & Photonics and the University of Arizona are developing a technique to trigger rain and lightning in clouds with a high-energy laser beam.

The researchers have discovered that surrounding a laser beam with a second beam creates an energy reservoir that can sustain the central beam over long distances. This second “dress” beam helps prevent the dissipation of the primary, higher-intensity beam. Alone, that primary beam breaks down, limiting its reach.  

An illustration of a dressed laser filament. Courtesy of UCF College of Optics and Photonics.

“When a laser beam becomes intense enough, it behaves differently than usual — it collapses inward on itself,” said Matthew Mills, a graduate student in the Center for Research and Education in Optics and Lasers (CREOL) at UCF. “The collapse becomes so intense that electrons in the air's oxygen and nitrogen are ripped off, creating plasma — basically a soup of electrons.”

"Because a filament creates excited electrons in its wake as it moves, it artificially seeds the conditions necessary for rain and lightning to occur," Mills said, noting that other researchers have been able to induce electrical events in clouds.

Water condensation and lightning activity in clouds are linked to large amounts of static-charged particles. Stimulating those particles by pointing the proper laser at a cloud could allow scientists to activate rain showers, and potentially even lightning.

Using their new technique, the researchers have demonstrated the ability to control the length of the filament, and were able to extend the laser pulse from 10 inches to about 7 feet.

“Ultimately, you could artificially control the rain and lightning over a large expanse,” Mills said.

The work could lead to “ultra-long, optically-induced filaments or plasma channels that are otherwise impossible to establish under normal conditions,” said Demetrios Christodoulides, a professor at CREOL who assisted with the research. He added that it may become possible for the dressed filaments to spread to distances of hundreds of feet.

Potential applications for the new technique include guiding of microwave signals, as well as long-distance chemical sensors and spectrometers.

The work was funded by a $7.5 million grant from the US Department of Defense. The research is published in Nature Photonics (doi: 10.1038/nphoton.2014.47).

For more information, visit:

Photonics Spectra
Jul 2014
A charged elementary particle of an atom; the term is most commonly used in reference to the negatively charged particle called a negatron. Its mass at rest is me = 9.109558 x 10-31 kg, its charge is 1.6021917 x 10-19 C, and its spin quantum number is 1/2. Its positive counterpart is called a positron, and possesses the same characteristics, except for the reversal of the charge.
A gas made up of electrons and ions.
AmericasArizonaBiophotonicsCenter for Research and Education in Optics and LasersCollege of Optics & PhotonicsCREOLelectronenergyfilamentFloridaimaginglightningplasmaResearch & TechnologySensors & DetectorsspectroscopyTech PulseTest & MeasurementUCFUniversity of ArizonaUniversity of Central FloridaUS Department of Defenseraindress beamlasers

back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2023 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA, [email protected]

Photonics Media, Laurin Publishing
x Subscribe to Photonics Spectra magazine - FREE!
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.