Close

Search

Search Menu
Photonics Media Photonics Marketplace Photonics Spectra BioPhotonics Vision Spectra Photonics Showcase Photonics ProdSpec Photonics Handbook

Ultrafast Optical Communications

Facebook Twitter LinkedIn Email
DAVIS, Calif., March 23, 2010 — A new device could make it much faster to convert pulses of light into electronic signals and back again. The technology, invented by engineers at the University of California – Davis, could be applied to ultrafast, high-capacity communications, imaging of the Earth's surface and for encrypting secure messages.

"We have found a way to measure a very high capacity waveform with a combination of standard electronics and optics," said S.J. Ben Yoo, professor of electrical and computer engineering at UC Davis.


The faint tree-like structures visible on the right side are optical waveguides that bring the light into and out of the optical circuit. The pattern of gratings filters the light signal. The gold traces on the left side supply electrical current to power the device. (Image: Ryan Scott, UC Davis)

The device is up to 10,000 times faster than existing technologies for measuring light pulses, Yoo said. It overcomes the limitations of existing approaches, by measuring both the amplitude (intensity) and the phase of a pulse at the same time, and can measure information capacity into the 100 terahertz range in real time. Current electronics are limited to information capacity in tens of gigahertz bandwidth.


Higher-frequency pulses can pack more information into a given length of time.

By making it possible to take a complex waveform and quickly decode it into a digital electronic signal, the device would make it possible to pack more data into optical signals.

Operated in reverse, the same kind of device could be used to generate optical signals from electronics.

The device -- developed by Yoo's UC Davis research group, including graduate student Nicolas Fontaine; postdoctoral researchers Ryan Scott, Linjie Zhou and Francisco Soares; and Professor Jonathan Heritage -- divides the incoming signal into slices of frequency spectrum, processes the slices in parallel and then integrates them.

The technology could be used in ultrahigh-speed communications and also in Lidar (light detection and ranging) systems. Lidar uses pulses of laser light to rapidly scan the landscape and produce highly detailed, three-dimensional images of the Earth's surface.

The next step is to work on putting the whole device into a small silicon chip, Yoo said.

The work is funded by grants from the US Defense Advanced Research Projects Agency.

For more information, visit: www.ucdavis.edu  

Photonics.com
Mar 2010
GLOSSARY
lidar
An acronym of light detection and ranging, describing systems that use a light beam in place of conventional microwave beams for atmospheric monitoring, tracking and detection functions. Ladar, an acronym of laser detection and ranging, uses laser light for detection of speed, altitude, direction and range; it is often called laser radar.
AmericasCaliforniaCommunicationsdefensedigital electronic signalelectronic signalsencryptingFiltersFrancisco Soaresfrequency spectrumhigh capacity waveformimaging of EarthJonathan Heritagelaser lightlidarlight sourcesLinjie ZhouNicolas Fontaineoptical communicationopticspulses of lightResearch & TechnologyRyan ScottS.J. Ben YooThree-dimensional imagesUniversity of California - DavisUS Defense Advanced Research Projects Agencylasers

back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2023 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA, [email protected]

Photonics Media, Laurin Publishing
x We deliver – right to your inbox. Subscribe FREE to our newsletters.
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.