Search Menu
Photonics Media Photonics Buyers' Guide Photonics Spectra BioPhotonics EuroPhotonics Vision Spectra Photonics Showcase Photonics ProdSpec Photonics Handbook

Ultrathin Films Resist Bacteria

Facebook Twitter LinkedIn Email Comments
CAMBRIDGE, Mass., May 16, 2008 -- Inexpensive, easy-to-produce, ultrathin films made of polymers could be applied to medical devices and other surfaces to control microbe accumulation. They could also help reduce the spread of hospital-acquired infections, which take the lives of 100,000 people and cost the US an estimated $4.5 billion annually, said researchers at MIT who developed the films.

They found that whether bacteria stick to surfaces depends partly on how stiff those surfaces are, and that they could control the extent of bacterial adhesion to surfaces by manipulating the mechanical stiffness of polymer films called polyelectrolyte multilayers. As a result, the films could be designed to prevent accumulation of hazardous bacteria or promote growth of desirable bacteria.

“All other factors being equal, mechanical stiffness of material surfaces increases bacterial adhesion,” said Krystyn Van Vliet, a professor of materials science and engineering and an author of a paper about the research published in the journal Biomacromolecules.

Van Vliet said the team found the same trend in experiments with three strains of bacteria: Staphylococcus epidermidis, commonly found on skin, and two types of Escherichia coli.

"Stiffness has usually been overlooked in studies of how bacteria adhere to surfaces in favor of other traits such as surface charge, roughness and attraction to or repulsion from water. The new work shows that stiffness should also be taken into account," Van Vliet said in an MIT statement.

The films could be combined with current methods of repelling bacteria to boost their effectiveness, said Michael Rubner, an author of the paper and director of MIT's Center for Materials Science and Engineering. Those methods include coating surfaces with antimicrobial chemicals or embedding metal nanoparticles into the surface, which disrupt the bacterial cell walls.

“For those bacteria that readily form biofilms, we have no delusions that we can prevent bacterial films from starting to form. However, if we can limit how much growth occurs, these existing methods can become much more effective,” Rubner said.

Jenny Lichter, a graduate student in materials science and engineering, and Todd Thompson, a graduate student in the Harvard-MIT Division of Health Sciences and Technology, are joint lead authors of the paper. They said the films could also be used on internal medical devices, such as stents and other cardiac implants.

Thompson said, “Once a foreign object enters into the body, if you can limit the number of bacteria going in with it, this may increase the chances that the immune system can defend against that infection."

Another possible application for the films is to promote growth of so-called “good bugs” by tuning the mechanical stiffness of the material on which these bacteria are cultured. These films could stimulate growth of bacteria needed for scientific study, medical testing or industrial uses such as making ethanol.

The researchers built their films, which are about 50 nms thick, with layers of polyelectrolytes, a class of charged polymer. Alternating layers are added at different pH (acidity) levels, which determines how stiff the material is when hydrated at near-neutral pH, such as water. Polymer films assembled at higher pH (up to 6) are stiffer because the polymer chains crosslink readily and the polymers do not swell too much; those added at lower, more acidic pH (down to 2.5) are more compliant, they said.

The results could be explained by the relationship between surfaces and tiny projections from the bacterial cell walls, known as pili, Van Vliet said. Stiffer surfaces may reinforce stronger, more stable bonds with the bacterial pili. The researchers are investigating this mechanism.

Their research was funded by the National Science Foundation, National Institutes of Health and the Arnold and Mabel Beckman Foundation Young Investigator Program.

Maricela Delgadillo, a senior in materials science and engineering, and Takehiro Nishikawa, a former postdoctoral researcher at MIT, now at the Advanced Medical Engineering Center in Osaka, Japan, are also authors of the paper.

For more information, visit:
May 2008
The technology of generating and harnessing light and other forms of radiant energy whose quantum unit is the photon. The science includes light emission, transmission, deflection, amplification and detection by optical components and instruments, lasers and other light sources, fiber optics, electro-optical instrumentation, related hardware and electronics, and sophisticated systems. The range of applications of photonics extends from energy generation to detection to communications and...
bacterial adhesionBiophotonicschemicalsindustrialmaterial surfacesmedical devicesmicrobe accumulationnanoNews & Featuresphotonicspolyelectrolyte multilayerspolymer filmspolymersultrathin films

back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2020 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA, [email protected]

Photonics Media, Laurin Publishing
x We deliver – right to your inbox. Subscribe FREE to our newsletters.
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.