Search Menu
Photonics Media Photonics Buyers' Guide Photonics EDU Photonics Spectra BioPhotonics EuroPhotonics Industrial Photonics Photonics Showcase Photonics ProdSpec Photonics Handbook
More News
Email Facebook Twitter Google+ LinkedIn Comments

Up-Conversion Fiber Laser Produces Visible Output

Photonics Spectra
Aug 2004
Anne L. Fischer

Lumics GmbH of Berlin has developed a visible-wavelength source based on an up-conversion fluorozirconate (ZBLAN) fiber laser that has emission lines comparable to those from an argon-ion laser. It works by exploiting the absorption of rare-earth ions in fluoride glasses, converting infrared radiation into visible light.

The frequency-conversion process involves the stepwise absorption of multiple photons in the rare-earth ions. An IR pump photon excites the ion to a higher state, and the ion relaxes into a lower level. If a second IR photon is absorbed within the lifetime of that energy level, the ion is bumped to an even higher excited state, and a transition to another low energy level can happen.

Up-Conversion Fiber Laser Produces Visible Output
The prototype of the up-conversion fiber laser uses a 0.5-m-long active fiber coupled with standard telecom connectors to the pump source. The pump wavelength depends on the dopant in the fluoride glass fiber.

Thus, the transition wavelength can be shorter than that of the IR pump transitions. For example, with optical output power of approximately 200 mW from a 970-nm pump laser, about 10 mW of green light can be converted within an a 0.5-m-long erbium-doped ZBLAN fiber.

These fiber-coupled lasers have several advantages over argon-ion lasers, including lower cost, maintenance, power consumption and heat dissipation; smaller size; and higher fiber-coupling efficiency. Advantages over frequency-doubled laser diode sources are the same except for maintenance requirements.

Visible-wavelength fiber lasers are used in confocal microscopy, in the bioanalytic market, in eye examinations and in large-area display technologies.

argon-ion laser
gas laser using ionized argon as the active medium and applying electronic excitation in order to produce the laser light
argon-ion laserCommunicationsfiber lasersLumics GmbHMicroscopyResearch & Technologyvisible-wavelength source

Terms & Conditions Privacy Policy About Us Contact Us
back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2019 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA,

Photonics Media, Laurin Publishing
x Subscribe to Photonics Spectra magazine - FREE!
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.