Search Menu
Photonics Media Photonics Buyers' Guide Photonics EDU Photonics Spectra BioPhotonics EuroPhotonics Industrial Photonics Photonics Showcase Photonics ProdSpec Photonics Handbook
More News
Email Facebook Twitter Google+ LinkedIn Comments

Urologists need better information on laser fiber diameter

Nov 2013
The advertised total and core diameters of laser fibers for urological surgery do not correspond with the actual diameters, according to a new study.

Furthermore, there are serious differences between manufacturers of fibers with supposedly equal diameters.

Urologists need to know the exact technical specifications of the material they use, said Dr. Peter Kronenberg of Hospital Fernando Fonseca in Amadora, Portugal, who conducted the study with professor Olivier Traxer of Hôpital Tenon in Paris. “If the information conveyed to them, whether written on a product label or transmitted by an industry representative, is incorrect, their judgments and the decisions they make based on this knowledge may have surgical repercussions,” Kronenberg said.

They evaluated 14 different laser fibers from six brands with advertised diameters of 200, 270, 272, 273, 365 and 400 µm, taking multiple measurements of both the total diameter (including fiber coating) and the fiber core diameter and comparing them to their respective advertised diameters.

The total and the core diameters measured were both significantly different from the advertised diameter in all fibers (p<0.00001). The median increase between total diameter and advertised diameter was 85.3 percent, with a range of 50.7 to 116.7 percent; four of the fibers were more than twice as thick as promoted. The measurement of core diameters of fibers with supposedly equal diameters revealed differences of up to 100 µm between manufacturers.

The study won the Clinical Research Award at the second meeting of the EAU Section of Urolithiasis (EULIS) in Copenhagen, Denmark. The findings warrant attention from the urological community – larger-than-advertised laser fibers influence irrigation flow, visibility, scope deflection and stone retropulsion – and the manufacturers of these fibers should consider the implications as well.


Terms & Conditions Privacy Policy About Us Contact Us
back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2019 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA,

Photonics Media, Laurin Publishing
x Subscribe to BioPhotonics magazine - FREE!
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.