Search
Menu
Rocky Mountain Instruments - Laser Optics LB

Cook to Helm AIM Photonics

Facebook X LinkedIn Email
William “Wade” Cook will serve as the executive director of AIM Photonics, the public-private partnership of industry and federal and state governments dedicated to advancing photonic integrated circuit manufacturing in the United States. AIM Photonics made the announcement Nov. 9.

Cook, a former past president of the Optical Society of America (Optica, formerly OSA) Rochester Section, has more than 20 years of experience in the optics and photonics industry, having served in roles ranging from engineer to manager to executive-level positions. Since 2017, he served as vice president of business development, then COO, and most recently as CTO and chief commercial officer at JML Optical Industries, a Rochester, N.Y.-based provider of optical solutions for the aerospace, defense, medical, life sciences, entertainment, imaging, and semiconductor industries.
William “Wade” Cook. Courtesy of AIM Photonics.
William 'Wade' Cook. Courtesy of AIM Photonics. 
Cook has also served as vice president for research and development at QVI (Quality Vision International), a Rochester company that provides optical, mechanical, electronic, and software technologies for vision and multisensor measuring systems. He serves on the board of directors for the Rochester Regional Photonics Cluster. He is also an active member of Optica, as well as SPIE, the International Society of Optical Engineers.

In addition to his optics and photonics industry experience, Cook served more than 29 years in the U.S. Army. He served in both staff and command positions in the U.S., Italy, Iraq, Bosnia, and Afghanistan. As a reserve officer, Cook also served as a nuclear weapons effect analyst and senior counter-weapons of Mass destruction planner at Fort Belvoir, as well as a senior civil affairs planner at the Pentagon.

After completing his active Army service, Cook earned his Ph.D. at the University of Rochester’s Institute of Optics, studying holography and laser-based metrology in the research group of Nicholas George.
Gentec Electro-Optics Inc   - Measure Your Laser MR

Published: November 2022
Glossary
semiconductor
A semiconductor is a type of material that has electrical conductivity between that of a conductor and an insulator. In other words, semiconductors have properties that are intermediate between metals (good conductors of electricity) and insulators (poor conductors of electricity). The conductivity of a semiconductor can be controlled and modified by factors such as temperature, impurities, or an applied electric field. The most common semiconductors are crystalline solids, and they are...
lithography
Lithography is a key process used in microfabrication and semiconductor manufacturing to create intricate patterns on the surface of substrates, typically silicon wafers. It involves the transfer of a desired pattern onto a photosensitive material called a resist, which is coated onto the substrate. The resist is then selectively exposed to light or other radiation using a mask or reticle that contains the pattern of interest. The lithography process can be broadly categorized into several...
Businesspeopleexecutive directorAIM PhotonicsUniversity of RochesterWade CookmilitaryOpticsphotonic integrated circuitssemiconductorlithographyJML Optical IndustriesRochesterWVIU.S. ArmyAmericasIndustry News

We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.