Search
Menu
Meadowlark Optics - SEE WHAT

Welding with Pulsed Lasers Protects Temperature-Sensitive Materials

Facebook X LinkedIn Email
A new ceramic welding technology developed by engineers at the University of California, San Diego and the University of California, Riverside uses a series of short, ultrafast laser pulses to melt ceramic materials along the interface between two ceramic parts and fuse them together. Heat builds up only at the interface, so the melting is localized. The researchers call their method “ultrafast pulsed laser welding.”

Laser welded ceramic assembly consisting of a transparent cylindrical cap joined to a ceramic tube. Courtesy of Garay lab/UC San Diego Jacobs School of Engineering.

Laser-welded ceramic assembly consisting of a transparent cylindrical cap joined to a ceramic tube. Courtesy of Garay lab/UC San Diego Jacobs School of Engineering.

To make this approach work, the researchers had to optimize the laser parameters (exposure time, number of laser pulses, and duration of pulses) and the transparency of the ceramic material. When these two aspects of the process are combined for optimal results, the laser energy couples strongly to the ceramic, allowing welds to be made using low laser power (less than 50 watts) at room temperature.

Professor Guillermo Aguilar said that the “sweet spot” for the ultrafast pulses was two picoseconds, at the high repetition rate of one megahertz, along with a moderate total number of pulses. “This maximized the melt diameter, minimized material ablation, and timed cooling just right for the best weld possible,” he said.

By focusing the energy of the laser precisely, the researchers were able to prevent temperature gradients from being set up throughout the ceramic, professor Javier E. Garay said. This allowed the researchers to encase temperature-sensitive materials without damaging them.

Laser setup used to test and measure the transparency of ceramic materials. Courtesy of David Baillot/UC San Diego Jacobs School of Engineering.

Laser setup used to test and measure the transparency of ceramic materials. Courtesy of David Baillot/UC San Diego Jacobs School of Engineering.


Deposition Sciences Inc. - Difficult Coatings - MR-8/23
As a proof of concept, the researchers welded a transparent cylindrical cap to the inside of a ceramic tube. Tests showed that the welds were strong enough to hold vacuum.

“The vacuum tests we used on our welds are the same tests that are used in industry to validate seals on electronic and optoelectronic devices,” said researcher Elias Penilla.

The researchers said that until now there has been no way to encase or seal electronic components inside ceramics because the entire assembly would need to be put in a furnace, which would burn the electronics.

Optical transmission through a transparent ceramic (left) vs. a traditional opaque ceramic (right). Courtesy of David Baillot/UC San Diego Jacobs School of Engineering.

Optical transmission through a transparent ceramic (left) versus a traditional opaque ceramic (right). Courtesy of David Baillot/UC San Diego Jacobs School of Engineering.

The ultrafast pulsed laser welding process has so far been used only to weld small ceramic parts that are less than two centimeters in size. In the future, the team plans to optimize the method for larger scales, as well as for different types of materials and geometries. This new approach to laser welding could ultimately make ceramics integral components in devices for harsh environments as well as in optoelectronic or electronic packages that need visible-radio frequency transparency.

The research was published in Science (https://doi.org/10.1126/science.aaw6699).   

Published: August 2019
Glossary
optoelectronics
Optoelectronics is a branch of electronics that focuses on the study and application of devices and systems that use light and its interactions with different materials. The term "optoelectronics" is a combination of "optics" and "electronics," reflecting the interdisciplinary nature of this field. Optoelectronic devices convert electrical signals into optical signals or vice versa, making them crucial in various technologies. Some key components and applications of optoelectronics include: ...
electronics
That branch of science involved in the study and utilization of the motion, emissions and behaviors of currents of electrical energy flowing through gases, vacuums, semiconductors and conductors, not to be confused with electrics, which deals primarily with the conduction of large currents of electricity through metals.
Research & TechnologyeducationAmericasUniversity of CaliforniaLasersLight SourcesMaterialsceramicsOpticsoptoelectronicspulsed lasersultrafast lasersTunable Lasersindustrialmedicalautomotiveaerospacesemiconductorselectronicslaser weldingUC San DiegoTech Pulse

We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.