Search Menu
Photonics Media Photonics Buyers' Guide Photonics EDU Photonics Spectra BioPhotonics EuroPhotonics Industrial Photonics Photonics Showcase Photonics ProdSpec Photonics Handbook
More News
Email Facebook Twitter Google+ LinkedIn Comments

Laser-Based System Monitors Polishing Equipment

Photonics Spectra
Apr 1998
Ruth A. Mendonsa

The integrated circuit manufacturing process imposes stiff requirements on makers of chemical mechanical planarization equipment. Planarization of the insulating oxide layers and formation of the tungsten, aluminum and copper interconnect layers are the equipment's primary functions. Its manufacturers need to provide accurate measurements of multiple film stacks on all the film types that are used for integrated circuit manufacturing. They also must be able to monitor the effectiveness of their equipment.

To meet these requirements, Strasbaugh Inc., a maker of chemical mechanical planarization polishers, turned to Therma-Wave Inc., which uses proprietary laser-based technology to design and manufacture nondestructive metrology and inspection systems for film-thickness measurement and ion-implant monitoring of advanced semiconductor devices.

Therma-Wave's Opti-Probe 3260 monitors the performance of Strasbaugh Inc.'s planarization equipment.

Therma-Wave's Opti-Probe 3260 fulfilled Strasbaugh's twofold requirement: The system enables the measurement of all film types, including some that the company previously couldn't measure, and supplies a means of monitoring the polishing equipment's performance.

Chemical mechanical polishing can be a challenge to control. Residual material tends to be removed from less dense areas more quickly, causing slopes on the film stacks. Also, to ensure accurate global planarity, the polish rate on small selected areas of wafers needs to be closely monitored.

The Opti-Probe employs advanced robotics, Pentium-speed processing, a spectrometric light source and pattern recognition. The system's small spot size is useful in determining localized planarization by detecting height differences in areas as small as 7 × 7 µm. Using both UV and 675-nm laser light sources, the Opti-Probe combines beam profile reflectometry, beam profile ellipsometry, spectrophotometry, spectroscopic ellipsometry and absolute ellipsometry to provide deep-UV, thickness, index-of-refraction and extinction-coefficient measurements down to 190 nm.

Because Strasbaugh works with many integrated circuit manufacturers worldwide, it needed a tool that provided an industry standard. After it began using the same measurement system as its customers, the company could simply upload the measurement recipes.

The science of measurement, particularly of lengths and angles.
Accent on ApplicationsApplicationsindustrialmetrology

Terms & Conditions Privacy Policy About Us Contact Us
back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2019 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA,

Photonics Media, Laurin Publishing
x Subscribe to Photonics Spectra magazine - FREE!
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.