Close

Search

Search Menu
Photonics Media Photonics Buyers' Guide Photonics Spectra BioPhotonics EuroPhotonics Vision Spectra Photonics Showcase Photonics ProdSpec Photonics Handbook
Photonics Buyers' Guide / NYFORS Teknologi AB
Full company details
NYFORS TEKNOLOGI AB
MapSolkraftsvagen 12
SE-135 70 Stockholm
Sweden
Phone: +46 8 712 1021
Fax: +46 8 712 3711

CLEAVEMETER 3D

Photonics Buyers' GuideNYFORS CLEAVEMETER 3DThe CLEAVEMETER 3D is a non-contact interferometer designed for inspecting the end-faces of cleaved or polished optical fibers with cladding diameters of 125 µm to 1200 µm. It gives immediate and precise information on important end-face properties such as flatness, perpendicularity, hackles and dust. Based on the NYFORS CLEAVEMETER 3D design, in addition to producing sharp fringe patterns it also generates three-dimensional images of the cleaved fiber end. When used in this mode, the surface topography is reconstructed from the fringe pattern and presented graphically as a three-dimensional image of the fiber end. By rotating the image and adjusting the scale and contrast, the surface quality and cleave angle at different points can be analysed in close detail, allowing for a more comprehensive understanding and accurate interpretation of the data and the cleaving process.

While this capability is always important to cleave quality analysis, it can be even especially helpful when analysing cleaving of fibers with complicated structures such as polarization maintaining fibers, or micro-structured fibers. Extremely accurate measurements of both cleave angle and surface flatness over arbitrary diameters can be performed on the reconstructed end-face surface. These measurements are carried out automatically. This makes the system well suited not only for detailed cleave quality analysis in laboratory environments, but also for close production monitoring where software features such as optional pass/fail indication of cleave angle help ensure that consistent cleave quality is maintained over long periods of continuous cleaver operator. In addition to cleave angle measurements, the system can also be used to measure a number of other properties such as plane angles, fiber diameters and the distance between points. The software allows the user to view the pointwise slope across the whole fiber end-face, a very useful tool for spotting small scale irregularities and crack propagation behaviour.

More products

REQUEST INFO ABOUT THIS PRODUCT

* Message:
(requirements, questions for supplier)
Your contact information
* First Name:
* Last Name:
* Email Address:
* Company:
Address:
Address 2:
City:
State/Province:
Postal Code:
* Country:
Phone #:
Fax #:

Register or login to auto-populate this form:
Login Register
* Required

When you click "Send Request", we will record and send your personal contact information to NYFORS Teknologi AB by email so they may respond directly. You also agree that Photonics Media may contact you with information related to this inquiry, and that you have read and accept our Privacy Policy and Terms and Conditions of Use.
back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2019 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA, info@photonics.com

Photonics Media, Laurin Publishing
x Wish you were here? Click to become an exhibitor today.
X
Are you interested in this product?
When you click "Send Request", we will send the contact details you supply to NYFORS Teknologi AB so they may respond to your inquiry directly.

Email Address:
Name:
Company:
Stop showing me this for the remainder of my visit
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.