SENSORS & DETECTORS

Compatible with over 30 sensor heads, our touchscreen power and energy meter console can be used to measure optical power of monochromatic or near monochromatic sources and energy of pulsed sources. The projected capacitive touchscreen uses multi-touch technology, allowing data displays to be zoomed and scrolled with hand gestures. These features make our power meter versatile and easy to use.

Polarization insensitive, a wide field of view, fast response time with no degradation even after a billion pulses. Available for use to 2 nm for EUV measurements without damage.

Thin cross section, low loss, polarization insensitive energy probes for use with excimer lasers.

Designed specifically to measure the energy generated by UV LED systems. The optics and instrument response have been engineered specifically for UV LEDs. The first product released in the LED-R Series is the EIT LEDCure™ featuring a L395 response with a near rectangular response from 370-420 nm.

The Power Puck II is a 4-band instrument with UVA, UVB, UVC and UVV bands. It is available as a standard or profiler unit. The profiler unit allows the transfer of data including the irradiance profile (W vs. time) to a computer.

The MicroCure is a very small radiometer with a fast sample rate. The values are displayed on the portable EIT data reader.

High absolute power measurement capability. Very compact footprints. High damage threshold.

Designed for high energy density and short pulses, with the very large aperture of 120 mm.

Designed for very high powers with a 55mm aperture. It can measure power from 100 W to 16,000 W. It has a deflecting cone and annular absorber that withstands high power densities to 10 kW/cm².

X-ray energy probe with NIST calibration report. Beams to 25 mm. Vacuum UV to 10-9 torr.