Close

Search

Search Menu
Photonics Media Photonics Marketplace Photonics Spectra BioPhotonics EuroPhotonics Vision Spectra Photonics Showcase Photonics ProdSpec Photonics Handbook
Photonics ProdSpec

FIBER OPTICS

Photonics ProdSpec is your source for Fiber Optics. Choose a category, filter by product specifications, view details about the products listed, and request a quote from vendors whose products fit your application. Use the Custom RFQ form to submit your specs and get quotes from multiple suppliers.
Custom RFQ
Sort:

1-10 of 51 items  123456
 per page

v Show Filters v
  • TYPE







  • COMPANY
  • v
    Key Suppliers
  • v
    Country
  • Search:
CLEAR SELECTIONS
DISPENSING PEN™
DISPENSING PEN™
NYFORS Teknologi AB, Sweden
REQUEST A QUOTEVISIT WEBSITE
The DISPENSING PEN™ is perfect for automatic and high precision resin dispensing of different kinds of materials. The clean design makes it easy to hold and control for operation. The dispensing speed is easily controlled. The size of the needle and the easily controlled dispensing speed makes it suitable for high precision fiber recoating and dispensing activities. The DISPENSING PEN™ is ideal for recoating application in conjunction with a manual RECOATER such as the NYFORS MICROCOATER, MINICOATER or RECOATER platforms. The DISPENSING PEN™ is also useful for other applications where glue or other kinds of acrylate needs dispensing. Different types of resin are loaded in the DISPENSING PEN™ by changeable resin cartridges. The DISPENSING PEN™ is controlled with a push button on the pen or could also be controlled with a button on the control box/pen-stand on the side. Features High precision dispensing Compact design and battery driven Controllable dispensing speed Changeable and dispensable resin cartridges
  • Type: Other

CLEAVEMETER 3D+™
CLEAVEMETER 3D+™
NYFORS Teknologi AB, Sweden
REQUEST A QUOTEVISIT WEBSITE
he CLEAVEMETER 3D+™ is a non-contact interferometer designed for high accuracy inspecting of end-faces for cleaved or polished optical fibers with cladding diameters of 125 μm to 1200 μm. The CLEAVEMETER 3D+™ gives immediate and precise information on the important end face properties such as flatness, perpendicularity, hackles and dust. Extremely accurate measurements of both cleave angle and surface flatness over arbitrary diameters can be performed on the reconstructed end-face surface. These measurements are carried out automatically, with full operator independence. This makes the system well suited not only for detailed cleave quality analysis in laboratory environments, but also for close production monitoring. In addition to cleave angles, the system can also be used to measure a number of other properties such as plane angles, fiber diameters and the distance between points.
  • Type: Cleavers
  • Fiber cladding: 125-1200µm
  • Fiber coating: 250-1500µm
  • Camera resolution: 1280×1024 pixels
  • Image scale: 1.25 µm per pixel
  • Image file format: 8-bit JPEG, PNG, TIFF, BMP/24-bit BMP for surface topography
  • PC connection: USB 2.0 port

SMARTSPLICERTM 1.5
SMARTSPLICERTM 1.5
NYFORS Teknologi AB, Sweden
REQUEST A QUOTEVISIT WEBSITE
Tabletop CO2 laser splicing and glass shaping system The SMARTSPLICER™ 1.5 includes a new glass processing window in the door to enable direct viewing of the process and the components as well as special fittings to mount on an optical table High precision optics with axicon refractive elements convert a laser beam into a ring of adjustable diameter, matching the fibers or components under processing. This optical configuration provides uniform and highly precise distribution of optical power through a completely contamination free heating process. Different types of fibers and optical components can be processed through glass shaping operations such as end cap splicing, fiber to fiber splicing, tapering, fiber power combiners, lensing, and many other applications.
  • Type: Splicers

Fiber Optic Adapter Couplers
Fiber Optic Adapter Couplers
ConnectZone, United States
REQUEST A QUOTE
Fiber optic adapter couplers feature low insertion and return loss designed for multiple connectivity options. Single-mode and multimode mating adapter couplers are available in various connector types with choice of simplex or duplex, all of which are RoHS compliant. Offers an adapter solution for any standard application. The mating adapter’s high-precision alignment sleeve enables reliable ferrule mating to specified ferrule diameters, ensuring low insertion and return loss.
  • Type: Connectors
  • Connector Types: SC, ST, FC, LC

AUTOCLEAVER LDF-M
AUTOCLEAVER LDF-M
NYFORS Teknologi AB, Sweden
REQUEST A QUOTEVISIT WEBSITE
A high precision fiber cleaver designed for cleaving of standard to large diameter fibers (LDF) in production and laboratory environments. A unique and patent pending cleaving process generates typical cleave angles below 0.3 degrees with smooth, high quality end faces, free from surface defects such as hackles, mist and chips. Easily exchanged fiber handling accessories ensures optimum cleaving performance for particular fiber dimensions.
  • Type: Cleavers
  • Cladding Diameters: 80 μm to <600 μm
  • Typical Cleave Angle: below 0.3 degrees

PROLITE-67: Power Meter
PROLITE-67: Power Meter
Promax Electronica SL, Spain
REQUEST A QUOTE
Selective optical power meter for FTTx-xPON MODE 1: Selective Meter by wavelength: 1310-1490-1550 nm Simultaneous measurement for three wavelengths (1310/1490/1550 nm). MODE 2: Optical measurements on active networks xPON and RFoG Measurement of the upstream bandwidth (ONT): Burst detector calibrated at 1310 nm (PON) and 1610 nm (RFoG). Measurement of the downstream bandwidth (OLT): Selective measurement: 1490/1550 nm.
  • Type: Testing Equipment
  • Test: Attenuation test
  • Locator: Visual
  • Wavelength: Red laser at 635 nm
  • Connection: Connection USB to PC

Combiner Manufacturing System
Combiner Manufacturing System
3SAE Technologies Inc., United States
REQUEST A QUOTEVISIT WEBSITE
The 3SAE Combiner Manufacturing System (CMS) is a vacuum based optical glass processing system designed to maintain production level repeatability for combiners and other fused optical components. The CMS includes tapering, cleaving, bundling, and fusion splicing utilizing 3SAE's patented Thermally Stabilized Plasma™ technology and achieves the industry's best optical performance, process cycle times, and component cleanliness.
  • Type: Splicers

SMARTSPLICER
SMARTSPLICER
NYFORS Teknologi AB, Sweden
REQUEST A QUOTEVISIT WEBSITE
An advanced laser fusion splicing and glass processing system designed for the production of high power and sensitive photonics components of various kinds. It features a powerful and clean laser heat source which enables completely contamination free glass shaping with low maintenance requirements and no need for consumables such as process gas, filaments or electrodes. Precision beam shaping optics.
  • Type: Splicers
  • Cladding Diameters: up to 2.5 mm
  • Design: user friendly with intelligent tool holders
  • System Operation: Horizontal or vertical

J730 Fiber optic-to-electrical Converter
J730 Fiber optic-to-electrical Converter
Highland Technology Inc., United States
REQUEST A QUOTEVISIT WEBSITE
A J720/J730 combination can transport logic level signals over kilometer distances in high EMI environments with link jitter typically below 12 picoseconds RMS. The J730 provides a digital logic output with risetime below 750 picoseconds. A fast analog (180 MHz bandwidth) output is provided for monitoring link integrity. The J730 is compatible with the Highland model J720 and J724 E/O Converters.
  • Type: Other
  • Output: +5V TTL (+2.25V into 50R)
  • Input: up to 2mW Optical
  • O/E Monitor: +2V/mW (+1V/mW into 50R)
  • Rise Time: <750ps (TTL) <2.5ns (O/E)
  • Jitter: <12ps, RMS (w/ J720)
  • Optical Wavelengths: 850nm, 1310nm, 1550nm

FCXtreme® versatile FC connector
FCXtreme® versatile FC connector
SEDI-ATI Fibres Optiques, France
REQUEST A QUOTE
FCXtreme® is a high-performance versatile and compact FC type connector, fully qualified for military and space flight applications. It is fully compatible with the FC J.I.S. standard. It has been qualified for operation under shocks, vibrations and dynamic variations of the temperature from -55 °C to +125 °C. Besides, it has zero-outgassing as it is made of stainless-steel and Zirconia materials.
  • Type: Connectors
  • Ferrule end-face: PC or APC
  • Insertion loss (typ.): PC <0.15 dB; APC <0.3 dB
  • Return loss (typ.): PC < -45 dB; APC < -65 dB
  • Fiber type: PM, SM, GI, SI < 1mm core
  • Operating temperature: -55°C to +125°C
  • Durability: > 500 cycles




1-10 of 51 items  123456
back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2020 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA, [email protected]

Photonics Media, Laurin Publishing
x Wish you were here? Click to become an exhibitor today.
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.