Photonics Dictionary: S

X-rays emitted by a substance that formerly has been exposed to x-rays. The properties of the substance determine the frequency of the rays.

A scanning electron microscope (SEM) is a powerful imaging instrument used in scientific research, materials characterization, and various industrial applications. Unlike traditional optical...

Scanning electron microscopy (SEM) is an advanced imaging technique used in microscopy to obtain high-resolution, three-dimensional images of the surfaces of solid specimens. SEM achieves this by...

The spot illuminated on a cathode-ray tube by the initial impact of the scanning ray and the screen.

A specific type of photographic plate designed with only a small amount of gelatin to function in the extreme ultraviolet and in positive-ray analysis.

A scientific CMOS (complementary metal-oxide-semiconductor) camera is a type of digital camera specifically designed for scientific imaging applications. It employs CMOS sensor technology, which...

A scintillation crystal, also known simply as a scintillator, is a material that emits light when it interacts with ionizing radiation such as gamma rays, x-rays, or charged particles. The emitted...

A scintillation detector is a radiation detection device that utilizes scintillation crystals to detect and measure ionizing radiation, such as gamma rays, x-rays, or charged particles. It consists...

A line formed by the principal (center) ray of an oblique bundle of rays.

Seidel aberrations refer to a set of monochromatic aberrations in optical systems, named after the German mathematician and physicist Ludwig von Seidel. These aberrations describe deviations from...

A polarizing beamsplitting prism similar in design to the Rochon prism. However, the Senarmont transmits the extraordinary ray without deviation and deviates the ordinary ray due to the orientation...

A variation of tomography, which is a means of visualizing any one of a large set of parallel planes in the patient. A series of x-ray pictures taken from different angles results in developed...

The Shack-Hartmann wavefront sensor is an optical device used for measuring the wavefront aberrations of an optical system. It is widely used in adaptive optics systems to correct distortions and...

A type of color-generating cathode-ray tube that uses a shadow mask, a thin perforated electrode, located close to the display screen. Each hole in the mask coincides with a triad of three phosphor...

A device used to measure the opening time of a shutter. The most common devices depend on the charging or discharging of an electrical condenser, or on the production of a curve of open area against...

A silicon photodiode is a semiconductor device that converts light into an electrical current. It is a type of photodetector specifically designed for detecting and measuring light intensity. Silicon...

Technology that uses data from an array of sensors, one of which is commonly lidar, to solve the problem of creating a map of an unknown environment while simultaneously maintaining a location within...

First stated by Abbe, condition states that the ratio of input and output angles, from object point to image point, for two arbitrary rays must be equal.

Any ray through an optical system that is not a meridional ray. The plane created by a refracted skew ray does not contain the optical axis.

A crystal, glass, or quartz slicing and cutting machine is a specialized piece of equipment used in the manufacturing process to precisely cut and slice materials such as crystals, glass, and quartz...

The investigation of microstructures by an instrument that generates a narrow, highly collimated beam of x-rays.

An array of active optical devices (modulators, laser diodes and/or detectors), each of whose electrical inputs or outputs are directly connected to electronic logic circuits, which also are a part...

A form of liquid crystal in which flow does not take place in the usual manner. When examined with polarized light, the substance often forms drops that display a series of fine lines. X-ray...

A transmission interference microscope that produces interference patterns of a sample by using birefringent plates that split a polarized beam of light into ordinary and extraordinary rays, then...

The incident ray, the normal to the refracting surface at the point of incidence of the ray at the surface, and the refracted ray all lie in a single plane. The ratio of the sine of the angle between...

A group of solar cells that are electrically contacted and physically arranged so that they may be oriented in the direction of the sun simultaneously.

A ruggedized scintillation counter used in oil well logging. The cylindrical housing contains a gamma ray source, a crystalline scintillator and a photomultiplier tube. As the sonde is drawn through...

A spatial light modulator (SLM) is an optical device that modulates or manipulates the amplitude, phase, or polarization of light in two dimensions, typically in the form of an array. SLMs are...

When, for example, a beam of monochromatic light passes through a diffraction grating, the emergent rays that have remained undeviated are included in the zero spectral order. The light flux in the...

A spectral signature, in the context of remote sensing and spectroscopy, refers to the unique pattern or characteristic spectral response of a material or object across different wavelengths of the...

A high-contrast transparency of the gas sought, or an array of exit slits that correlates with some features of the spectrum. No standardized formula for positioning, number or thickness has been...

A scanning device used to cyclically tune through a given frequency range to determine the amplitude-frequency distribution of the signals present, usually by displaying output on a chart or...

A spheric lens, also known as a spherical lens, is a type of optical lens with at least one surface that is part of a sphere. This means that the lens surface is curved in a symmetrical manner,...

Spherical aberration is an optical aberration that occurs when light rays passing through a lens or curved optical surface do not converge or diverge to a single focal point. Instead of focusing to a...

A container which secures multiple splice trays and protects the trays and their contents from damage.

A container that prevents spliced fibers from becoming damaged or being misplaced.

A method of evaluating image quality whereby a large number of rays are traced through a lens from a single object point, and their intersections with the focal plane are plotted and analyzed.

A memory system composed of a stack of holographic plates, a mode-locked laser and a rapid detector array. Ultrashort laser pulses are used to extract information from the stack. In this way, storage...

The splitting or shifting of spectral lines or energy levels caused by the application of a strong transverse electrical field. It often is studied with a canal-ray tube that has a third electrode...

A technique for creating optimal performance in a system by producing a specific beam irradiance distribution, usually through the use of geometric optics. A common design involves the use of ray...

The projection of the image beam by a cathode-ray tube through a mask, where it is deflected through the suitable character position in the mask and then deflected by another system to its suitable...

The array of methods used in the transmission and reception of pictures and images with a three-dimensional appearance.

A cathode-ray tube combined with an electrostatic storage unit that is used to introduce, store and retrieve information translated into electric charge form.

The determination of axially symmetric and asymmetric refractive-index distributions by use of interferometry carried out on the basis of the approximation of a straight path of rays passing through...