Definitions

1. In optics, the ability of a lens system to reproduce the points, lines and surfaces in an object as separate entities in the image. 2. The minimum adjustment increment effectively achievable by a...

A chart on paper or glass containing a series of sets of lines at progressively smaller spacing and used to ascertain the limiting number of lines per millimeter that an optical system is capable of...

The degree to which a pixel in a digital image represents the analog brightness of the corresponding point in the original image. It is dependent largely on the number of bits devoted to representing...

A satellite-borne remote sensing device capable of transmitting images at 10 and 20 m resolution from an altitude of 830 km, each sensor covering a ground area of 60 km, by means of a folded...

In television, the number of individual pixels that can be distinguished in a horizontal scanning line; also called horizontal definition.

Hyperspectral resolution refers to the level of detail or granularity in the spectral information captured by a hyperspectral imaging system. In hyperspectral imaging, the electromagnetic spectrum is...

The angle subtended by two points or lines that are just far enough apart to be distinguished as separate. The ability of an optical device to resolve two points or lines is called resolving power...

A measure of image quality produced by an optical system. May be specified in terms of cycles per millimeter, referencing a repeating bar pattern; or angular resolution, referencing the angle...

A measure of the ability of a photographic system to record fine detail. Usually stated in terms of cycles per millimeter on the processed film.

Spatial resolution refers to the level of detail or granularity in an image or a spatial dataset. It is a measure of the smallest discernible or resolvable features in the spatial domain, typically...

A phenomenon that causes the details in an image to appear at a spatial frequency higher than that at which the contrast first drops to zero. A phase reversal will accompany this phenomenon, often...

Superresolution refers to the enhancement or improvement of the spatial resolution beyond the conventional limits imposed by the diffraction of light. In the context of imaging, it is a set of...

In television system specifications, the number of parallel horizontal black and white lines of equal thickness, that can be resolved from top to bottom of the raster. (One line equals either a black...

Adaptive optics (AO) is a technology used to improve the performance of optical systems by reducing the effects of atmospheric distortions. The Earth's atmosphere can cause light passing through it...

In display technology, an expression of resolution given by the number of pixels in both the horizontal and the vertical axes of a cathode-ray tube or similar device.

A television format with enhanced vertical resolution (400 lines as compared with the standard 330) that, unlike high-definition television, can operate on existing bandwidths and with existing...

Agri-photonics refers to the application of photonics technologies in agriculture. Photonics involves the generation, manipulation, and detection of light and other forms of radiant energy whose...

In image processing, methods of reducing image defects that result from false data. Techniques include sampling, linear intensity, filtering a high-resolution image to produce a low-resolution image,...

A loss of resolution or detail in a television signal caused by the size of the electron scanning beam.

An aplanatic surface is an optical surface that is specifically designed or shaped to minimize spherical aberration and coma. Spherical aberration is an optical aberration that occurs when light rays...

Area scan, in the context of imaging and cameras, refers to a method of capturing an entire two-dimensional image in a single snapshot or exposure. Unlike line scan, which captures images one line at...

An aspheric lens is a type of lens whose surface profiles deviate from the traditional spherical shape. Unlike spherical lenses, which have a constant curvature across their surfaces, aspheric lenses...

An atomic force microscope (AFM) is a high-resolution imaging and measurement instrument used in nanotechnology, materials science, and biology. It is a type of scanning probe microscope that...

Attosecond-pump attosecond-probe spectroscopy (APAP) is an advanced technique in ultrafast spectroscopy that allows scientists to study the dynamics of electronic processes occurring on extremely...

Automated optical inspection (AOI) is a technology used in manufacturing processes, particularly in electronics, to automatically inspect and detect defects or anomalies in products. AOI systems use...

An axicon is a type of optical component characterized by its conical shape and its ability to transform a collimated Gaussian beam of light into a ring-shaped beam with a gradually increasing...

A ball lens is a small, spherical optical component typically made of glass or other transparent materials. It is characterized by its spherical shape, with both its front and back surfaces forming...

Bathymetric lidar is a remote sensing technique used to measure the depth of water bodies and map underwater terrain features. It employs lidar (Light Detection and Ranging) technology, which uses...

Combining adjacent pixels into one larger pixel, resulting in increased sensitivity and lower resolution, or, in image analysis, excluding objects based on shape, position or area.

A blue diode laser is a type of semiconductor laser that emits light in the blue wavelength range of the electromagnetic spectrum, typically between 400 and 500 nanometers. Diode lasers are compact,...

The law expressing the condition under which a crystal will reflect a beam of x-rays with the greatest amount of distinction or resolution and, at the same time, denoting the angle at which the...

Camera Link HS (high speed) is a standard developed for high-speed digital data transmission in machine vision and industrial imaging applications. It is an evolution of the original Camera Link...

A CCD camera, or charge-coupled device camera, is a type of digital camera that utilizes a CCD image sensor to capture and record images. CCD cameras are widely used in various applications,...

A charge-coupled device (CCD) is a type of electronic image sensor used in various imaging devices, including digital cameras, camcorders, and scientific instruments. It consists of an integrated...

Chirped mirrors are optical devices designed to manipulate the spectral properties of ultrashort laser pulses. They consist of multiple layers of dielectric coatings deposited on a substrate, where...

An optical instrument used to track and image a test vehicle (target) throughout its flight. The cinesextant frequently includes multiple devices such as high-speed video and film cameras as well as...

A CMOS camera refers to an imaging device that employs a complementary metal-oxide-semiconductor (CMOS) image sensor to capture digital images. CMOS cameras have become ubiquitous due to their low...

CoaXPress (CoaXPress or CXP) is a standardized digital interface and communication protocol used primarily in machine vision and industrial imaging applications. It enables high-speed data...

An imaging process in which the single opening of a simple pinhole camera is replaced with many openings called, collectively, the aperture. The recorded picture, which consists of many overlapping...

A coherent fiber bundle (CFB), also known as a coherent fiber optic bundle, is an assembly of multiple optical fibers arranged in a specific geometric pattern to maintain the spatial coherence of...

Deep multiphoton microscopy is an advanced imaging technique used in biological and biomedical research to visualize structures and processes deep within tissues with high resolution. It combines the...

The clarity of an optically reproduced image. Definition is produced by the combination of resolution and acutance.

A chart, either printed on paper or prepared photographically on glass plates or film, that consists of 3-bar resolution test objects, sine-wave test objects for modulation transfer function...

A detector array refers to a collection of individual detector elements arranged in a two-dimensional grid or matrix format. Each element within the array is capable of detecting electromagnetic...