Products by Category

< All CategoriesOptomechanics & PositioningHexapodsStagesGalvanometersOptical TablesOther Optomechanics / Positioning

AdTech Ceramics - Ceramic Packages 1-24 MR

PI Physik Instrumente - 50 ways hexapod HP 5/24

20 products

Optomechanics & Positioning

Clear All Filters x IR applications x Optomechanics & Positioning x

5 mm Linear Stage with Piezoelectric Inertia Drive
Thorlabs Inc.

Type: Linear Stage
Max. Load: 1kg
Mass: 32g
Height: 6.5mm
X-Axis Travel Length: 5mm
Max. Linear Speed: 10mm/s
Stage Type: Motorized
Connector Type: 15-Pin Female D-Sub
Max. Step Frequency: 20 kHz
Operation: Open-Loop

Dual-Axis Galvanometer Scan Heads
Thorlabs Inc.

Type: 2 Axis
Max. Beam Diameter: 45mm
Max. Scan Angle X (degrees): 22.5
Max. Scan Angle Y (degrees): 22.5
Small Step Response (µs): 1200
Repeatablility (µrad): 10
Linearity (%): 99.9
Control Electronics: Analog Servo Amplifiers
Gain Drift: 50 ppm/°C
Mirror Substrate: Fused Silica/SiC/Si

M150XY(/M)
Thorlabs Inc.

Type: Linear Stage
Max. Load: 10kg
Mass: 8.9kg
Height: 70.1mm
X-Axis Travel Length: 150mm
Y-Axis Travel Length: 150mm
Max. Linear Speed: 170mm/s
Absolute On-Axis Accuracy: ±10 μm
Continuous Motor Force: 10.0 N
Maximum Acceleration: 1000 mm/s^2

Multi-Axis Gantries, Cartesian Robots
PI (Physik Instrumente) LP, Motion Control, Air Bearings, Piezo Mechanics

Type: Linear Stage

Miniature Linear Stages
PI (Physik Instrumente) LP, Motion Control, Air Bearings, Piezo Mechanics

Type: Linear Stage

Automated Photonics Alignment Systems
PI (Physik Instrumente) LP, Motion Control, Air Bearings, Piezo Mechanics

Type: Other

H112 ProScan Stage
Prior Scientific Inc.

Type: Linear Stage
Max. Load: 25kg
X-Axis Travel Length: 302mm
Y-Axis Travel Length: 302mm
Stage Type: Motorized
Linear Slides: 4 mm precision bearings
Minimum Step Size: 0.04 µm
Stepper Motor: High precision stepper

HT1111LC ProScan Stage
Prior Scientific Inc.

Type: Linear Stage
Max. Load: 100kg
X-Axis Travel Length: 108mm
Y-Axis Travel Length: 108mm
Stage Type: Motorized
Drive Screws: Zero backlash, recirc. ball screws; 2 mm pitch
Minimum Step Size: 0.4 µm
Stepper Motor: 4 phase, 1 amp/phase, microstepping

Rotary Motion Systems
ALIO Industries LLC

Type: Rotation Stage
Max. Load: 40kg
Max. Rotation Speed (degrees/s): 5500
Stage Type: Motorized

Granite Gantry Ultra-Precision XYZ Positioning System
Opton Laser International SA

Type: Linear Stage
Max. Load: 30kg
X-Axis Travel Length: 1000mm
Y-Axis Travel Length: 1300mm
Max. Linear Speed: 1000mm/s
Stage Type: Motorized
Driver Included?: No
Acceleration: ≤15.000 mm/s2
Bi-direct. Repeatability: ±0.5 µm or better
Calibrated Abs. Accuracy: ±1.5 µm or better

Optical Mirror Mounts
Photonics Technologies Ltd.

Type: Optical Mounts

MMS
Dover Motion

Type: Linear Stage
Max. Load: 12kg
Height: 37mm
X-Axis Travel Length: 400mm
Max. Linear Speed: 2m/s
Stage Type: Motorized
Driver Included?: No
Accuracy: <15 μm
Repeatability: 2 μm

excelliSCAN
Scanlab America Inc.

Type: 2 Axis
Repeatablility (µrad): 0.4
Overall Height (no mirror): 158.5cm
Weight: 7kg

DC Motor Motorized Linear Stages
Moticont

Type: Linear Stage
Max. Load: 20kg
Mass: 6.4kg
Height: 9.5cm
X-Axis Travel Length: 13.2cm
Y-Axis Travel Length: 13.2cm
Max. Linear Speed: 150cm/s
Continuous Force: 4.6 to 21.5 N
Continuous Power: 10 to 50 W
Encoder Type: Quadrature

MicroDamp Series
Herzan

Type: Passive Damping

ZONDA Hexapod
Symetrie

Type: Hexapod
Max. Load: 400kg
Mass: 99kg
Height: 640cm
X-Axis Range: 200mm
Y-Axis Range: 200mm
Z-Axis Range: 150mm
Repeatability Rx, Ry, Rz: ± 2 µrad
Repeatability Tx, Ty, Tz: ± 0.5 µm
Resolution Rx, Ry, Rz: 0.5 µrad

BORA Hexapod
Symetrie

Type: Hexapod
Max. Load: 10kg
Mass: 4.3kg
Height: 145mm
X-Axis Range: 20mm
Y-Axis Range: 20mm
Z-Axis Range: 10mm
Repeatability Rx, Ry, Rz: ± 6.5 µrad
Repeatability Tx, Ty, Tz: ± 1.5 µm
Resolution Rx, Ry, Rz: 2 µrad

Saturn 1B
ScannerMAX

Type: 2 Axis
Max. Beam Diameter: 4mm
Max. Scan Angle X (degrees): 110
Max. Scan Angle Y (degrees): 110
Small Step Response (µs): 75
Repeatablility (µrad): 5
Linearity (%): 99.9

SCR100
Nippon Pulse America Inc.

Type: Nanopositioning Stage
Max. Load: 45.5kg
Mass: 4.5kg
Height: 32mm
X-Axis Travel Length: 300mm
Y-Axis Travel Length: 0cm
Z-Axis Travel Length: 0cm
Accuracy: 12µm
Built-in Encoder: Optical
Linear Shaft Motor: S080Q

SMFCx/Six Axis Single-Mode Fiber Coupler
Siskiyou Corp.

Type: Linear Stage
Height: 45mm
X-Axis Travel Length: 2mm
Y-Axis Travel Length: 2mm
Stage Type: Manual

Optomechanics & Positioning Products

We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.