PHOTONICS ProdSpec

Stock and custom germanium optic solutions for thermal imaging and thermography applications. Windows from 5 to 300 mm diameter. Spherical and diamond-turned aspherics to 150 mm diameter. Available with AR/DLC, hydrophobic or petrochemical coatings from 2 to 14 µm.

The manual MicroStage-BX fits onto Olympus upright BX microscopes and uses manual micrometers to control XY motion. Continuous internal position locking combined with excellent stability makes this stage an ideal base for our high resolution piezo nanopositioning stages.

The high-powered TPM Machines deliver advanced processing solutions. The internally-cooled and thermostatically-controlled top and bottom plates facilitate continuous runs, at high speed and pressure 24 hours a day, 7 days a week. A non-contact system, the TPM's Keyence design provides real-time, digital, stock removal readout. The SOMOS TPM Series is available in a variety of sizes.

Custom coating(s), custom configuration(s), material type Options: fused silica, N-BK7, Zerodur or CCZ, Supremax. Custom metrology services; large aperture interferometery; customer furnished material.

Optical isolators are a combination of a linear polarizer and a Quartz quarter wave retardation plate. These optical isolators are manufactured using a polarizing cube beamsplitter and a quartz quarter-wave plate. They are antireflection coated for the wavelength of interest.

Wavelength stabilized laser diodes with narrow wavelength tolerance and much lower wavelength variation on current and temperature.

Standard MgF2 blanks for excimer laser with size Ø38.1*5.5 mm; Ø50*5.5 mm, Ø60*5.5 mm, and 65*40*3.5 mm. We also supply low stress birefringence max. <15 nm size of 30*30*50 mm and 45*45*50 mm, and 100 orientation for waveplate size from Ø5.0 to 100 mm. Our MgF2 material can apply for 121/157/193/248/305 nm. These material meet ROHS, accepting by USA, Germany, Japan, and Russia buyers.

The G&H fused visible wavelength RGB (red, blue and green) polarization-maintaining (PM) 1×2 and 2×2 fiber optic couplers, taps and optical signal splitters offer high extinction ratio (ER) with polarization launch into a single or dual axis (slow axis and fast axis).

Ball lenses are completely spherical lenses most commonly used to couple light in and out of fibers. Half-ball lenses are hemispheres. We supply high precision grade-3 ball lenses, midrange grade-25 ball lenses and commercial grade-100 ball lenses offering all grades to suit any application. Material options: ruby, cubic zirconia, sapphire, ceramic (Al2 O2, ZrO2, SI3 N4), quartz.

Plug&Play Laser Light Engines with up to 7 user-upgradable wavelengths and 2 fibre outputs • Up to 7 wavelengths beam-combined and fibre coupled into one or two fibres • Over 30 different wavelengths • Upgradable by the end-user • One or two single-mode, polarization maintaining or multimode fibre coupled outputs • All lasers with direct analogue and digital modulation

Neo Series offers a versatile solution for different spectral measurement needs, fit for a wide array of applications. Its well-thought-out optical and mechanical construction assures the highest optical performance, even under tough conditions. Creating an OEM solution? Needing a spectroradiometer answering to the highest expectations for development applications? Neo is your choice.

With a resolution of 12 MP, the imaging clarity of the Sony Pregius™ IMX304 has been designed into a compact form factor suitable for many imaging applications. The Lt-C/M4020B Lt Series board level camera offers the full set of camera features that are expected in today’s imagining industry.

Beamsplitters: Standard range plate beamsplitters Economy range plate beamsplitters Precision λ/4 range plate beamsplitters Offers both types of beamsplitters as custom options.

These plano-concave BK7 or UV fused silica mirror blanks are polished to λ/10 surface accuracy with a laser grade finish on both sides. Select a coating appropriate to your application. Special coating requirements accepted.

We manufacture the most challenging polymer optic components, modules, and assemblies for leading defense, medical, and commercial applications with advanced technology and an experienced team. Each design is different and custom made.

These plano-concave lenses are made from infrared grade calcium fluoride and are excellent for use with lasers emitting in the 2 - 5 micron range. They are supplied uncoated but antireflection coatings are available on request.

Designed for high strength applications, this advanced and flexible recoating system restores the protective acrylate coating on spliced and stripped optical fibers. It is fully automatic, allowing for operator skill independent operation in factory environments with high productivity and cost advantages. Recoating material is automatically injected into silicone moulds identical to those used in NYFORS manual recoaters. They are available in different sizes and shapes to cover a wide range of...

There are different models available. Please check the data sheet.

Custom aspheres made to print, right here in the United States. We offer 2D and 3D metrology if required to qualify your parts are made to specification. Our coatings range from 280 - 2400 nm (high UV to SWIR), BBARs, V-coats, high laser damage resistance, hydrophobic coatings, dielectric mirrors, beam splitters, and custom coatings.