3718 products listed – cameras, lasers, LEDs, optics, sensors, fiber optics, spectrometers, microscopes, and more.
Choose a section above, then filter products by specification.
PromotedFEATURED PREMIER PRODUCTS
Stages
MicroStage-BXMad City Labs Inc., United StatesThe manual MicroStage-BX fits onto Olympus upright BX microscopes and uses manual micrometers to control XY motion. Continuous internal position locking combined with excellent stability makes this stage an ideal base for our high resolution piezo nanopositioning stages.
- Type: Nanopositioning Stage
- Graduation: 10 µm
- Vernier graduations: 1 µm
- Body Material: Aluminum
Optics
Parallel WindowsCASTECH INC., ChinaMost sizes with λ/20 transmitted wavefront and 10-5 surface quality are available; a variety of coatings are available; custom designs for other sizes and coatings are available upon request.
- Type: Windows
- Material: BK7 or UV Fused Silica
- Diameter Tolerance: +0/-0.15 mm
- Thickness Tolerance: ±0.25 mm
- Clear Aperture: >Central 85% of diam
Spectrometers
Neo SpectrometerAdmesy BV, NetherlandsNeo Series offers a versatile solution for different spectral measurement needs, fit for a wide array of applications. Its well-thought-out optical and mechanical construction assures the highest optical performance, even under tough conditions. Creating an OEM solution? Needing a spectroradiometer answering to the highest expectations for development applications? Neo is your choice.
- Type: Benchtop
- Non-linearity: < 1%
- S/N: > 1300:1
- FWHM Configurable from: 1.5 to 3.7 nm
- Wavelength Accuracy: ± 0.3 nm
- Stray Light: ~ 0.05 %
- Detector: High end cooled Hamamatsu
Optics
Optical IsolatorLambda Research Optics Inc. (USA), United StatesOptical isolators are a combination of a linear polarizer and a Quartz quarter wave retardation plate. These optical isolators are manufactured using a polarizing cube beamsplitter and a quartz quarter-wave plate. They are antireflection coated for the wavelength of interest.
- Type: Beamsplitters
- Material: BK7A and Quartz
- Surface Quality: <20/10
- Transmitted Wavefront: < λ/4 @ 633 nm
LEDs & Emitters
High-Power GaAIAs IRLED Illuminator - OD-663-850Opto Diode Corporation, United StatesHigh-Power GaAlAs IRLED Illuminators: -Ultra-high optical output -850 nm IR Illuminator - Standard 2-lead TO-66 electrically-isolated package -Very uniform optical beam -Ideal for night vision illumination
- Type: Through Hole
- Lead soldering temperature: 260 °C
- Reverse voltage: 5 V
- Spectral bandwidth @50%: 40 nm
- Rise time: 100 nsec
- Fall time: 100 nsec
- Reverse Breakdown Voltage: 5 V
Optics
Plano Concave Lens - IR Grade CaF2Lambda Research Optics Inc. (USA), United StatesThese plano-concave lenses are made from infrared grade calcium fluoride and are excellent for use with lasers emitting in the 2 - 5 micron range. They are supplied uncoated but antireflection coatings are available on request.
- Type: Lenses
- Material: IR Laser Grade CaF2
- Surface Flatness: < λ / 4 @ 633 nm
- Surface Quality: <20/10 (both sides)
Optics
Custom Polymer OpticsDiverse Optics Inc., United StatesWe manufacture the most challenging polymer optic components, modules, and assemblies for leading defense, medical, and commercial applications with advanced technology and an experienced team. Each design is different and custom made.
Lasers & Laser Systems
LightHUB UltraOmicron-Laserage Laserprodukte GmbH, GermanyPlug&Play Laser Light Engines with up to 7 user-upgradable wavelengths and 2 fibre outputs • Up to 7 wavelengths beam-combined and fibre coupled into one or two fibres • Over 30 different wavelengths • Upgradable by the end-user • One or two single-mode, polarization maintaining or multimode fibre coupled outputs • All lasers with direct analogue and digital modulation
Stages
- Type: Rotation Stage
- Non-Magnetic Materials: Available
- UHV Compatibility: Yes
Optics
Magnesium Fluoride (MgF2) materialHenan UM Optics Ltd. (Umoptics), ChinaStandard MgF2 blanks for excimer laser with size Ø38.1*5.5 mm; Ø50*5.5 mm, Ø60*5.5 mm, and 65*40*3.5 mm. We also supply low stress birefringence max. <15 nm size of 30*30*50 mm and 45*45*50 mm, and 100 orientation for waveplate size from Ø5.0 to 100 mm. Our MgF2 material can apply for 121/157/193/248/305 nm. These material meet ROHS, accepting by USA, Germany, Japan, and Russia buyers.
- Type: Blanks
- Grow method: Cz and Bridge man
- Diameter: Ø150
- Thickness: 100 mm
- Orientation: 001;100
- Application: wave plate
- Application: PID, excimer
Optics
High Energy Laser MirrorsPerkins Precision Developments LLC, United StatesTypical mirror coatings include dielectric low-loss high reflectors (HR), broadband high reflectors (BBHR), dichroic mirrors, trichroic mirrors, beamsplitter mirrors and low phase shift designs.
- Type: Mirrors
- Surface Quality: 10-5
- Roughness: 1-3Å rms
- Reflectivity: > 99.9%
- Damage Threshold: > 20 J
Optics
Plano Concave Mirror SubstratesLambda Research Optics Inc. (USA), United StatesThese plano-concave BK7 or UV fused silica mirror blanks are polished to λ/10 surface accuracy with a laser grade finish on both sides. Select a coating appropriate to your application. Special coating requirements accepted.
- Type: Mirrors
- Material: UV Fused Silica or BK7A
- Surface Flatness: < λ / 10 @ 633 nm
- Surface Quality: <10/5 (both sides)
Other Fiber Optic Products
VIS (400 - 680 nm) PM Fiber Optic CouplersG&H, United KingdomThe G&H fused visible wavelength RGB (red, blue and green) polarization-maintaining (PM) 1×2 and 2×2 fiber optic couplers, taps and optical signal splitters offer high extinction ratio (ER) with polarization launch into a single or dual axis (slow axis and fast axis).
- Type: Couplers
- Minimum Extinction Ratio: 18 - 20 dB
- Excess Loss: <0.5 dB/<0.8 dB
- Operating Temperature: 0 to +70 ºC
- Storage Temperature: -40 to +85 ºC
- Coupling Ratio: see datasheet
- Return Loss: ≥30 dB
Cameras
Lt-C4020B / Lt-M4020BTeledyne Lumenera, CanadaWith a resolution of 12 MP, the imaging clarity of the Sony Pregius™ IMX304 has been designed into a compact form factor suitable for many imaging applications. The Lt-C/M4020B Lt Series board level camera offers the full set of camera features that are expected in today’s imagining industry.
Other Fiber Optic Products
Fitel S185 Fusion Splicer Series3SAE Technologies Inc., United StatesThe FITEL S185 Fusion Splicer series features six splicers: The S185HS, S185PM, S185LDF, S185PM-LDF, S185ROF (Ring of Fire) and S185PM-ROF. Ring of Fire models equip the powerful arc-discharging by three electrodes instead of two electrodes.
Laser Beam Profilers
Z-Trak LP2CTeledyne DALSA, Machine Vision OEM Components, CanadaA family of 3D profile sensors for in-line 3D measurement and inspection applications.
- Type: Camera
- NFOV-FFOV (mm): 582-1130
- Unified Measurement Space: 360°
- Standoff Distance: 558 mm
- Z-Resolution: 81-156 µm
- X-Resolution: 160-312 µm
Other Fiber Optic Products
AUTOCOATER 2NYFORS Teknologi AB, SwedenDesigned for high strength applications, this advanced and flexible recoating system restores the protective acrylate coating on spliced and stripped optical fibers. It is fully automatic, allowing for operator skill independent operation in factory environments with high productivity and cost advantages. Recoating material is automatically injected into silicone moulds identical to those used in NYFORS manual recoaters. They are available in different sizes and shapes to cover a wide range of...
- Type: Other
- Curing time: Programmable, 3 s typical
- Cycle time: 15 s typical
- Light source: UV LED
- Wavelength: 380-385 nm
- Power supply: External 12 V DC, 60 W
- Weight: 4.5 kg
Optics
Custom Aspheric LensesLaCroix Precision Optics, United StatesFor over 75 years, LaCroix Precision Optics has specialized in manufacturing custom precision optics. Lead times range from 4-6 weeks (expedited service) and 8-10 weeks (traditional lead time). LaCroix has the flexibility to assist you in scaling from prototypes to production volumes. Coatings can be deposited in a wide working range of 250 - 2500nm (high UV to SWIR).
Optical Fabrication Accessories
HASTILITE MOV 850Universal Photonics Inc., United StatesHASTILITE MOV 850 for Clean CNC Polishing HASTILITE MOV 850 is used for critical polishing applications on a variety of glass types, glass-ceramics, and some optical crystals. HASTILITE MOV 850 was created with rare earth and other oxides that have been finely processed to produce narrow sub-micron particle size range. HASTILITE MOV 850 contains technical enhancements for improved settling, and efficient polishing characteristics.
- Type: Polishing Material and Pads
- pH: 7.8 - 8.8
- Solid Content (%): 40 - 50
- Particle Size D50 (μm): 0.3 - 0.5
- Particle Size D99 (μm): < 2
- Density (g/mL): 1.4 - 1.6
- Size Availability: 1 Gallon, 1 Pint
Lasers & Laser Systems
Wavelength Stabilized DiodePhotonTec Berlin GmbH, GermanyWavelength stabilized laser diodes with narrow wavelength tolerance and much lower wavelength variation on current and temperature.
- Type: Diode
- Fiber Core Diameter: 105 and 200
- Numerical Aperture: 0.22