3718 products listed – cameras, lasers, LEDs, optics, sensors, fiber optics, spectrometers, microscopes, and more.
Choose a section above, then filter products by specification.
PromotedFEATURED PREMIER PRODUCTS
Optics
Graded Reflectivity MirrorsBMV Optical Technologies Inc., CanadaLeading manufacturer of custom Gaussian Reflectivity Mirrors (GRMs). Substrate materials includes both glass and crystal materials such as BK 7, Fused Silica, and ZnSE at diameters from 5 to 25.4 mm. The spectral range of our deposited Gaussian and Super-Gaussian coating geometries is from the VIS to the FIR and available in any custom rotationally symmetrical variations; both standard and inverted.
- Type: Mirrors
- AR Coating (R avg % @ single wavelength) Radius Tolerance (%): ≤ 0.2
- Central Reflectance: ± 1.0
- Waist Size (mm): ± 0.1
- N Order (%): ± 5.0
- Laser Damage Threshold Sub 28% R: 1800 MW/cm²
- Laser Damage Threshold Sub 45% R: 500 MV/cm²
Lasers & Laser Systems
DPSS-XT Laser SeriesLASOS Lasertechnik GmbH, Germany•Single frequency operation •Excellent long-term stability •Good beam quality •Low noise
Lasers & Laser Systems
LightHUB UltraOmicron-Laserage Laserprodukte GmbH, GermanyPlug&Play Laser Light Engines with up to 7 user-upgradable wavelengths and 2 fibre outputs • Up to 7 wavelengths beam-combined and fibre coupled into one or two fibres • Over 30 different wavelengths • Upgradable by the end-user • One or two single-mode, polarization maintaining or multimode fibre coupled outputs • All lasers with direct analogue and digital modulation
Optics
Plano Concave Mirror SubstratesLambda Research Optics Inc. (USA), United StatesThese plano-concave BK7 or UV fused silica mirror blanks are polished to λ/10 surface accuracy with a laser grade finish on both sides. Select a coating appropriate to your application. Special coating requirements accepted.
- Type: Mirrors
- Material: UV Fused Silica or BK7A
- Surface Flatness: < λ / 10 @ 633 nm
- Surface Quality: <10/5 (both sides)
Optics
Starlight LensFOCtek Photonics Inc., ChinaUsed for matching 2/3", 1" and 4/3" CCD and CMOS in intelligent transportation systems. The resolution is up to 10 MP and the large aperture is ideal for low Lux ITS cameras. Applications include precision instruments, medical equipment, automation equipment, automatic optical inspection, security and road monitoring.
Optics
High Energy Laser MirrorsPerkins Precision Developments LLC, United StatesTypical mirror coatings include dielectric low-loss high reflectors (HR), broadband high reflectors (BBHR), dichroic mirrors, trichroic mirrors, beamsplitter mirrors and low phase shift designs.
- Type: Mirrors
- Surface Quality: 10-5
- Roughness: 1-3Å rms
- Reflectivity: > 99.9%
- Damage Threshold: > 20 J
LEDs & Emitters
High-Power GaAIAs IRLED Illuminator - OD-663-850Opto Diode Corporation, United StatesHigh-Power GaAlAs IRLED Illuminators: -Ultra-high optical output -850 nm IR Illuminator - Standard 2-lead TO-66 electrically-isolated package -Very uniform optical beam -Ideal for night vision illumination
- Type: Through Hole
- Lead soldering temperature: 260 °C
- Reverse voltage: 5 V
- Spectral bandwidth @50%: 40 nm
- Rise time: 100 nsec
- Fall time: 100 nsec
- Reverse Breakdown Voltage: 5 V
Optical Fabrication Accessories
HASTILITE MOV 850Universal Photonics Inc., United StatesHASTILITE MOV 850 for Clean CNC Polishing HASTILITE MOV 850 is used for critical polishing applications on a variety of glass types, glass-ceramics, and some optical crystals. HASTILITE MOV 850 was created with rare earth and other oxides that have been finely processed to produce narrow sub-micron particle size range. HASTILITE MOV 850 contains technical enhancements for improved settling, and efficient polishing characteristics.
- Type: Polishing Material and Pads
- pH: 7.8 - 8.8
- Solid Content (%): 40 - 50
- Particle Size D50 (μm): 0.3 - 0.5
- Particle Size D99 (μm): < 2
- Density (g/mL): 1.4 - 1.6
- Size Availability: 1 Gallon, 1 Pint
Stages
Nano-BioMad City Labs Inc., United StatesThe Nano-Bio Series are ultralow profile, two-axis piezo nanopositioning systems. The low profile design allows it to be easily integrated into existing inverted microscopes, AFMs and other instrumentation where space is limited. The large center aperture allows the Nano-Bio to accommodate the lenses of all major microscope manufacturers.
- Type: Nanopositioning Stage
- Stability: High
- Control: Closed Loop
- Type: Low profile, two axis
Laser Beam Profilers
Z-Trak LP2CTeledyne DALSA, Machine Vision OEM Components, CanadaA family of 3D profile sensors for in-line 3D measurement and inspection applications.
- Type: Camera
- NFOV-FFOV (mm): 582-1130
- Unified Measurement Space: 360°
- Standoff Distance: 558 mm
- Z-Resolution: 81-156 µm
- X-Resolution: 160-312 µm
Cameras
Lt-C4020B / Lt-M4020BTeledyne Lumenera, CanadaWith a resolution of 12 MP, the imaging clarity of the Sony Pregius™ IMX304 has been designed into a compact form factor suitable for many imaging applications. The Lt-C/M4020B Lt Series board level camera offers the full set of camera features that are expected in today’s imagining industry.
Stages
MicroStage-BXMad City Labs Inc., United StatesThe manual MicroStage-BX fits onto Olympus upright BX microscopes and uses manual micrometers to control XY motion. Continuous internal position locking combined with excellent stability makes this stage an ideal base for our high resolution piezo nanopositioning stages.
- Type: Nanopositioning Stage
- Graduation: 10 µm
- Vernier graduations: 1 µm
- Body Material: Aluminum
Other Fiber Optic Products
AUTOCOATER 2NYFORS Teknologi AB, SwedenDesigned for high strength applications, this advanced and flexible recoating system restores the protective acrylate coating on spliced and stripped optical fibers. It is fully automatic, allowing for operator skill independent operation in factory environments with high productivity and cost advantages. Recoating material is automatically injected into silicone moulds identical to those used in NYFORS manual recoaters. They are available in different sizes and shapes to cover a wide range of...
- Type: Other
- Curing time: Programmable, 3 s typical
- Cycle time: 15 s typical
- Light source: UV LED
- Wavelength: 380-385 nm
- Power supply: External 12 V DC, 60 W
- Weight: 4.5 kg
Optics
Plano Concave Lens - IR Grade CaF2Lambda Research Optics Inc. (USA), United StatesThese plano-concave lenses are made from infrared grade calcium fluoride and are excellent for use with lasers emitting in the 2 - 5 micron range. They are supplied uncoated but antireflection coatings are available on request.
- Type: Lenses
- Material: IR Laser Grade CaF2
- Surface Flatness: < λ / 4 @ 633 nm
- Surface Quality: <20/10 (both sides)
Other Fiber Optic Products
VIS (400 - 680 nm) PM Fiber Optic CouplersG&H, United KingdomThe G&H fused visible wavelength RGB (red, blue and green) polarization-maintaining (PM) 1×2 and 2×2 fiber optic couplers, taps and optical signal splitters offer high extinction ratio (ER) with polarization launch into a single or dual axis (slow axis and fast axis).
- Type: Couplers
- Minimum Extinction Ratio: 18 - 20 dB
- Excess Loss: <0.5 dB/<0.8 dB
- Operating Temperature: 0 to +70 ºC
- Storage Temperature: -40 to +85 ºC
- Coupling Ratio: see datasheet
- Return Loss: ≥30 dB
Spectrometers
Neo SpectrometerAdmesy BV, NetherlandsNeo Series offers a versatile solution for different spectral measurement needs, fit for a wide array of applications. Its well-thought-out optical and mechanical construction assures the highest optical performance, even under tough conditions. Creating an OEM solution? Needing a spectroradiometer answering to the highest expectations for development applications? Neo is your choice.
- Type: Benchtop
- Non-linearity: < 1%
- S/N: > 1300:1
- FWHM Configurable from: 1.5 to 3.7 nm
- Wavelength Accuracy: ± 0.3 nm
- Stray Light: ~ 0.05 %
- Detector: High end cooled Hamamatsu
Optics
Custom Polymer OpticsDiverse Optics Inc., United StatesWe manufacture the most challenging polymer optic components, modules, and assemblies for leading defense, medical, and commercial applications with advanced technology and an experienced team. Each design is different and custom made.
Other Fiber Optic Products
Optical DNA Rapid Detection System - Lamppy™ SeriesOZ Optics Limited, CanadaUniversal Optical DNA Rapid Detection System for Pathogens including Covid-19, Sars, Ebola, Cholera, Salmonella, etc. (Lamppy™ Series) At OZ Optics, we have developed a compact and reliable instrument capable of detecting pathogens at a fraction of the cost of qPCR machines.
Optics
Magnesium Fluoride (MgF2) materialHenan UM Optics Ltd. (Umoptics), ChinaStandard MgF2 blanks for excimer laser with size Ø38.1*5.5 mm; Ø50*5.5 mm, Ø60*5.5 mm, and 65*40*3.5 mm. We also supply low stress birefringence max. <15 nm size of 30*30*50 mm and 45*45*50 mm, and 100 orientation for waveplate size from Ø5.0 to 100 mm. Our MgF2 material can apply for 121/157/193/248/305 nm. These material meet ROHS, accepting by USA, Germany, Japan, and Russia buyers.
- Type: Blanks
- Grow method: Cz and Bridge man
- Diameter: Ø150
- Thickness: 100 mm
- Orientation: 001;100
- Application: wave plate
- Application: PID, excimer
Lasers & Laser Systems
Wavelength Stabilized DiodePhotonTec Berlin GmbH, GermanyWavelength stabilized laser diodes with narrow wavelength tolerance and much lower wavelength variation on current and temperature.
- Type: Diode
- Fiber Core Diameter: 105 and 200
- Numerical Aperture: 0.22