Automated Optical Inspection Systems
MEK Europe BVRequest Info
TILBURG, Netherlands, Aug. 3, 2018 — 
Mek PowerSpector BTL automated optical inspection systems from Marantz Electronics Ltd. offer synchronized inspection of the top and bottom side of printed circuit boards after reflow, wave, or selective soldering, and placement of surface-mount and through-hole technology components.
With nine cameras per side and both heads inspecting the board at the same
time, you can expect fast inspections without the high-power lighting system of each head affecting the other inspection taking place. The elimination of flipping removes potential for stress on the assembly and improves long-term reliability of solder joints. The GTAz-based bottom side inspection head has a clearance of 30 mm from the board surface. An additional Z axis allows the head to be adjusted by 30 mm to allow optimal flexibility for inspection inside solder frames and the correct adjustment of side cameras to further enhance defect identification capabilities.
The 18.75-μm resolution of the main optics and the 13-μm resolution of the
side cameras also give the option for 01005-in. surface-mount device inspection including height verification of objects like pins and packages, and also 3D chip height measurement.
http://www.marantz-electronics.com
/Buyers_Guide/MEK_Europe_BV/c25161
Published: August 2018
REQUEST INFO ABOUT THIS PRODUCT
* First Name:
* Last Name:
* Email Address:
* Company:
* Country:
Message:
When you click "Send Request", we will record and send your personal contact information to MEK Europe BV by email so they may respond directly. You also agree that Photonics Media may contact you with information related to this inquiry, and that you have read and accept our
Privacy Policy and
Terms and Conditions of Use.
Register or login to auto-populate this form:
Login
Register
* Required