.4mm LED-based BLU

The LUX 3030 and 2835 from Luminus Devices are LEDs with KSF narrow-band red phosphor technology. The LEDs deliver a 120° typical viewing angle and minimum 90 color rendering index (CRI) with a...

The RANGE 2 from Revopoint 3D is a 3D scanner meant for capturing scans of large objects in quality control, reverse engineering, automobile modification, and prototyping applications. The scanner...

The GP-CVM600P series of 600-W LED constant voltage drivers from GlacialPower include nondimming, 3-in-1, and DALI-2 dimming versions. The direct-current output voltages include 12, 24, 36, 48,...

The series of colored LEDs from ams OSRAM are RGB versions of the previously released OSTAR® Projection Compact LEDs. Using a 2-mm² chip, the LEDs have a high luminous output, with the...

Technologies like integrated signal distributing, processing, and sensing networks require basic optical elements such as waveguides, splitters, gratings, and optical switches to be miniaturized....

With the development of a single-layer, blue-emitting OLED, researchers at the Max Planck Institute (MPI) for Polymer Research demonstrated that one-layer OLEDs can achieve a performance level...

With the advent of the IoT, there is increased need to display large amounts of information to people quickly and without distortion in all types of lighting conditions. Though transmissive and...

ZEISS and 3D scanner and measurement systems developer Scantech are partnering to offer Scantech scanners with ZEISS inspection software. The collaborations seeks to enhance the performance of...

In the beginning, automated inspection focused on the camera and optics, the algorithms, the interface hardware and the processor. Only rarely was attention paid to the lighting system or lighting...

High-brightness LEDs have found their way into applications such as signs and displays, cell phone flash modules, automotive lighting and general illumination. Some applications, however, such as...

Hyperspectral imaging spectroscopy has developed dramatically from a large, complex, remote-sensing satellite- or aircraft-based system into a rugged, compact, economically priced imaging and...

The common polycrystalline materials used for optical thin-film materials do not satisfy the requirements of telecommunications because of the instabilities caused by moisture absorption in their...

This whitepaper looks at the unique challenges associated with optical systems by exploring two extremes, an ultra-high precision instrument, and a low-cost consumer product, and the different...

Everything you need to know about soldering, mounting, thermal management, drive current, environment, and more, regarding extending the lifetime of your laser diodes.

The ISO 10110 & material cheat sheet assists optical designers in specifying their optical prints according to the ISO 10110 optics drawing standards. This cheat sheet comprises two sections, namely...

Explore the world of lock-in amplifiers in this paper, vital for success in photonics labs. Grasp the details of detecting amplitude and phase amid widespread signal changes from pulsed lasers,...

Most of us are familiar with the many benefits that laser-based additive manufacturing brings to manufacturing, including reduced tooling costs, easier testing of complex geometries, and faster time...

Photonics Media will host its second annual Photonics Spectra Conference Jan. 10-13. The virtual event will comprise four technology tracks — Lasers, Optics, Sensors and Detectors, and Imaging...

FREE WEBINAR Dr. Hamid Hemmati Supervisor, Optical Communications Group Jet Propulsion Laboratory California Institute of Technology In this talk, Dr. Hemmati will cover...

High-power diode lasers have progressed significantly since their first appearance in the market. Today, these lasers are able to utilize high power levels and high-percentage electro-optical...

Gallium nitride-based light-emitting diodes (GaN-based LEDs) are semiconductor devices that emit light when an electric current passes through them. These LEDs are constructed using gallium nitride...

A high-speed motion camera, also known as a high-speed camera or slow-motion camera, is a specialized imaging device designed to capture fast-moving events or phenomena at extremely high frame rates....

QLED stands for quantum dot light-emitting diode. QLED is a display technology that utilizes quantum dots, which are semiconductor nanocrystals, to produce vibrant and high-quality images. QLED...

Frame rate refers to the frequency at which consecutive images, or frames, are displayed in a video sequence. It is typically measured in frames per second (fps) and determines the smoothness and...

For more information, please follow our SOCIALS: Linkedin YoutubeFacebook Twitter Website Email

To celebrate this milestone, we've created a video showcasing the journey to the new design. We invite everyone to #joinus and watch the video now! The new DayOptics image is a testament to our...

Check out our new video tutorial on how to clean spherical lenses! Our latest video breaks down the step-by-step process for effectively cleaning spherical lenses, ensuring crystal-clear images every...

Technology Transfer Programs are often a concerted effort to share skills, knowledge, technologies, methods of manufacturing, samples of manufacturing, and facilities among governments or...

A blue diode laser is a type of semiconductor laser that emits light in the blue wavelength range of the electromagnetic spectrum, typically between 400 and 500 nanometers. Diode lasers are compact,...

Fresnel Technologies Inc. is an expert manufacturer of molded plastic optics, including Fresnel lenses and related optical components, as well as infrared transmitting materials and optics made from...

PhotonTec Berlin GmbH is located in the Center for Microsystems and Materials (ZMM) in Berlin-Adlershof, Germany. We focus on the development, production, and marketing of fiber-coupled diode lasers...

Established in 1985, OZ Optics is a leading worldwide supplier of fiber optic components, test equipment and sensors. OZ Optics manufactures its products in three locations, Ottawa (Canada),...

Omicron-Laser has been developing, manufacturing and distributing innovative laser and LED light sources since 1989. With a highly qualified team based in Germany, Omicron is specialized in...