Laser Safety Software

Extended 2.6-µm Cutoff InGaAs Photodiode Photodetectors from Marktech Optoelectronics Inc. provide high sensitivity, high speed, and low noise for nondispersive spectrometers, pyrometers, and...

The Ellex® Tango Reflex™ Neo Yttrium Aluminum Garnet (YAG) Selective Laser Trabeculoplasty (SLT) laser from Lumibird Medical is a fully integrated, Q-switched and frequency doubled device...

The ContourX-1000 from Bruker Corp. is a white-light interferometry system that enables fast, automated areal measurements of surface texture and roughness. It features patented tip/tilt head,...

The AP 530 S automated laser system from Coherent is designed for the texturing and marking of implantable medical devices. The freeform system operates unattended between the loading and...

Confocal and multiphoton microscopy are commonly used to provide 3D-resolved images of in vitro or in vivo tissue samples without physical sectioning. But there are also inherent trade-offs in the...

Sivers Photonics, a subsidiary of Sivers Semiconductors, has partnered with LioniX International and Chilas BV to develop and supply a narrow-linewidth integrated O-band continuous-wave tunable...

Researchers from the University of Toulouse have developed a method to fabricate a microlens that could enable more effective portable gas sensing technologies. The researchers used...

Postpartum hemorrhage, the leading and most preventable cause of maternal mortality, can be hard to detect, because physiological compensation mechanisms can mask excessive bleeding. In the early...

Over 60 years have passed since the first demonstration of a laser in 1960. After the initial spark of interest, lasers were for a while categorized as “a solution waiting for a problem,”...

Laser diodes vary widely in their wavelengths, powers, spectra and beam quality. Yet they share two fundamental components with all other lasers: an optical amplifier and a resonator that confines...

The basic setup in laser perforation includes a pulsed laser, a lens and either a moving mirror, a rotating web or both. Each laser pulse creates a hole in the material. During the blank time in...

Lumispot Tech Laser Solution - Light source of 1550 nm/1535 nm pulsed fiber laser for laser lidar used in unmanned driving, with the function of ranging, detection etc.

Lumispot Tech laser ranging module products designed for different ranging distance, which could be easily mounted in different platforms.

Despite the rapid development of modern lasers, the Gaussian intensity distribution often leads to problems, especially in laser material processing. When welding wide weld seams, a top-hat profile...

Highly customized and application optimized laser optics for demanding applications from demanding markets.

No laser user wishes to hurt themselves or others, or damage expensive equipment. Nevertheless, accidents do happen. Learn the steps to ensuring the safe use of lasers in your work environment, and...

Swept-source optical coherence tomography (SS-OCT) system performance is primarily determined by the rapid tuning speed and wide tuning bandwidth of the swept laser source, as well as the...

Laser welding has developed into one of the most used joining techniques in sheet metals for applications such as car bodies, medical devices, sensors, batteries, and more. To create successful welds...

The field of laser optics, while by no means new, continues to be a subject of confusion and frustration, but also exciting innovation. Recent developments in laser technologies have enabled...

Abbreviated TEA CO2 laser. A gas laser that provides shorter pulses and higher peak powers than conventional CO2 lasers. The electrical excitation pulse occurs transversely to the optical axis...

An exciton is a quasiparticle that represents the bound state of an electron and a hole in a solid-state material, typically a semiconductor or an insulator. In simpler terms, an exciton is a paired...

A pulse having extremely short duration, about 10-13 to 10-10 s, that is produced by mode locking of wide-bandwidth lasers, such as the organic dye and ruby lasers. Picosecond pulses are used in the...

A type of computer in which the electronic circuits, which process data serially, are replaced by photonic circuits capable of parallel processing and thus of much greater speed and power. Where the...

As a leader in the laser system and LED light sources business, Omicron-Laser has been developing, manufacturing, and distributing innovative laser and LED light sources since 1989. Omicron offers CW...

Edinburgh Instruments is a world-leader in both single photon counting and time correlated single photon counting (TCSPC) based fluorescence spectrometers. Our product range includes: FLS1000...

Telecentric Lenses are widely used in metrology instruments, laser marking systems, and AOI (Automatic Optical Inspection) machines. Here’s a 360 view of one of our custom Telecentric Lenses which...

At the exhibition, BWT exhibited more than 20 types of diode lasers, fiber lasers, and ultrafast lasers.

FOCtek provides customers with all types of custom manufactured lenses, Precision Optical Components, Polarizing Optics, Prisms, Filters, Coatings, Optical Systems, Crystals, Nonlinear Crystals,...

OHARA manufactures more than 130 environmentally safe optical glass types, free of both lead and arsenic. More than 300 tons of optical glass are melted per month, available in the following forms of...

Established in 1985, OZ Optics is a leading worldwide supplier of fiber optic components, test equipment and sensors. OZ Optics manufactures its products in three locations, Ottawa (Canada),...

LASER SAFETY • Eyewear • Barriers • Windows • Training laservision USA designs and manufactures a comprehensive assortment of custom-made laser safety eyewear that attenuates...