TRAP-IT™ Beam Dumps Liquid-cooled
Kentek CorporationRequest Info
TRAP-IT™ Laser Beam Dumps Liquid-cooled models are designed to dissipate incoming laser power via heat dissipation. Place these control measures in a position along the optical beam path to provide a final beam stop. Available with 2 inch [50 mm], 4 inch [101.1 mm], or 6 inch [152.4 mm] diameter target apertures, these designs allow for large beam cross sections. Recommended for use with up to a 1000 watt laser, and laser damage threshold < 150 W/cm2.
These potential limits could increase depending on supplied cooling loop capabilities and your ability to expanded the laser beam to a larger size. Coolant fittings require poly tubing with a 10mm outside diameter, maximum pressure: 50 psi [3.5 bar] and require 1/4 gallon per minute [0.94 litters] for 1-200 watts, 3/4 gallon per minute [2.83 litters] for 201-500 watts, and 1 1/2 gallon per minute [5.67 litters] for 501-1,000 watts. Contact a Kentek representative to discuss your laser application and potential integration of one of these beam dumps.
https://www.kenteklaserstore.com/products/laser-control-measures/trap-it-laser-beam-dumps?utm_source=email&utm_medium=photonics&utm_campaign=featured_product
/Buyers_Guide/Kentek_Corporation/c17088
REQUEST INFO ABOUT THIS PRODUCT
* First Name:
* Last Name:
* Email Address:
* Company:
* Country:
Message:
When you click "Send Request", we will record and send your personal contact information to Kentek Corporation by email so they may respond directly. You also agree that Photonics Media may contact you with information related to this inquiry, and that you have read and accept our
Privacy Policy and
Terms and Conditions of Use.
Register or login to auto-populate this form:
Login
Register
* Required