UV10TKMed UV System

Master Bond Inc.Request Info
Facebook X LinkedIn Email
HACKENSACK, N.J., July 25, 2013 — Master Bond Inc. has released UV10TKMed, a high-viscosity UV system for bonding, sealing, coating and cytotoxicity.

The one-part device is optically clear and has a glass transition temperature exceeding 140 °C. With a service temperature range from –60 to 450 °F, it resists repeated sterilization, including radiation, ethylene oxide, chemical sterilants and autoclaving. Combining dimensional stability with low shrinking upon curing, it is 100 percent reactive and does not contain any solvents or diluents.

The instrument readily cures in 20 to 30 s when exposed to a UV light source with an energy output as low as 20 to 40 mW/cm2. The cure rate depends on the compound’s distance from the light source, the thickness of the section and the intensity of the light source. It can cure sections up to ¼ in.; however, when bonding, sections of a few thousandths of an inch are adequate.

It bonds well to glass, composites, surface-treated metals and plastics such as polycarbonates and acrylics, and is available in syringe applicators, ½-pint, pint, quart, gallon and 5-gallon containers.

Published: July 2013
* First Name:
* Last Name:
* Email Address:
* Company:
* Country:

When you click "Send Request", we will record and send your personal contact information to Master Bond Inc. by email so they may respond directly. You also agree that Photonics Media may contact you with information related to this inquiry, and that you have read and accept our Privacy Policy and Terms and Conditions of Use.

Register or login to auto-populate this form:
Login Register
* Required

AmericascytotoxicityMaster Bond Inc.New JerseyOpticsProductsUV light sourceUV systemUV10TKMed

We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.