Request InfoWolfspeed Inc.Cree Inc. has enhanced its XLamp LED family with the introduction of the multichip XLamp MC-E LED. At 9.8 W, the 7 × 9-mm device provides up to 790 lm at 6000 K and up to 605 lm at 3000 K. It is available in cool, neutral and warm white and has a viewing angle of 110° FWHM. Maximum drive current is 700 mA per LED die, and thermal resistance is 3 °C/W.See full productRelated content from Photonics MediaWEBINARSPhotonics.com 3/7/2019In Vivo Medical Laser Procedures: An OverviewThis webinar, presented by OFS, will provide an overview of current in vivo medical procedures performed using lasers and optical fibers. The presentation will begin with a brief history of...Photonics.com 10/27/2021Fiber Optic Solutions for Medical DevicesSteve Allen provides a brief overview and examples of procedures that continue to push adoption and proliferation of optical fiber-based medical devices. From cosmetic surgery to cutting-edge sensing...Photonics.com 3/27/2024Precision Planning: Simplified Laser Scanning with Predictive SoftwareConventional controllers for laser scan systems do not allow to predict the actual path of the laser beam on the work piece. A tedious process of testing different parameters and delay settings...Photonics.com 1/18/2018Fiberguide RARe Motheye Fiber: Random Anti-Reflective (RARe) Nanostructures on Optical Fibers as Replacement for AR CoatingsAnti-reflective (AR) coatings are now entering their second century and have remained virtually unchanged throughout their life. As power level and wavelength range requirements continue to increase,...PHOTONICS DICTIONARY+ TERMSPhotonics Dictionarythermal interface materialsThermal interface materials (TIMs) are substances or compounds used to enhance the thermal conductivity between two surfaces in contact. These materials are primarily employed in electronic devices,...Photonics Dictionarythermal resistanceIn a laser, a measure of the device's ability to dissipate internally generated heat.