Search Menu
Photonics Media Photonics Buyers' Guide Photonics EDU Photonics Spectra BioPhotonics EuroPhotonics Industrial Photonics Photonics Showcase Photonics ProdSpec Photonics Handbook
More News
Email Facebook Twitter Google+ LinkedIn Comments

100-km Negative-Dispersion Fiber Carries 10 Gb/s

Photonics Spectra
Nov 2001
Richard Gaughan

To satisfy consumer demand for higher bandwidth in metropolitan-area networks, wavelength division multiplexing (WDM) systems must include economical, application-optimized components. Researchers have reported a new fiber with negative dispersion from 1280 to 1620 nm that has the ability to carry 32 signals at 10 Gb/s over 100 km.

Directly modulated distributed feedback lasers are cost-effective sources of 1550-nm light that offer 10-Gb/s modulation rates and outputs of 5 to 10 mW, but they display positive-frequency chirp, in which the leading edge of a pulse is blue-shifted while the trailing edge shifts to the red. If the zero-dispersion wavelength of single-mode dispersion-shifted fiber is matched to the laser, long-distance single-channel transmission is possible over the span. When more lasers are added, however, cross-channel nonlinear effects limit their reach. On the other hand, fibers with sufficient positive dispersion at the 1550-nm wavelength cause the bit patterns to overlap, reducing the effective transmission length to only 10 km.

9-dB Q-factor over 100 km

Scientists at Corning Inc.'s Photonics Research and Test Center in Somerset, N.J., measured the transmission characteristics of the company's MetroCor negative-dispersion fiber with distributed feedback lasers from different commercial suppliers. At 10-Gb/s rates, their initial tests with an extinction ratio of 8 dB yielded error rates of better than 10-15 through a 75-km fiber, corresponding to a Q-factor of 9 dB. With a 5-dB extinction ratio, they found the same Q-factor over 100 km of fiber.

Ioannis Tomkos, a researcher working with Richard Vodhanel's group at the center, extended the testing to a 32-channel WDM architecture with up to four nodes over 100 km of the fiber. The 10-Gb/s channels, which were separated by 200 GHz, each demonstrated a Q-factor better than 9 dB.

According to Tomkos, the 320-Gb/s aggregate bandwidth system demonstrates the feasibility of cost-effective high-capacity networks serving the majority of European metro needs.

The team plans to evaluate the fiber's performance with other transmitter types, such as wavelength-tunable vertical-cavity surface-emitting lasers.

Communicationsfiber opticsResearch & TechnologyTech Pulse

Terms & Conditions Privacy Policy About Us Contact Us
back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2019 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA,

Photonics Media, Laurin Publishing
x Subscribe to Photonics Spectra magazine - FREE!
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.