Search
Menu
Hamamatsu Corp. - Earth Innovations LB 2/24

Cameras Are Focusing on All Microscopy Applications

Facebook X LinkedIn Email
Hank Hogan, Contributing Editor

The goal of all microscopists is simple: to see what they want in a sample. This leads to different camera requirements for different applications, but advances in the technology have it covered.
There is more going on in microscope cameras than meets the eye. Digital interfaces, as much as the demands of the applications, promise to deliver higher camera resolution and user-friendly operation. New CCD sensors under development should yield cameras of greater sensitivity and lower cost. CMOS sensors, on the other hand, still seem to be the technology of tomorrow — or maybe the day after.

Exploiting the advances in CCDs, vendors are crafting better cameras for the scientific microscopy market. And manufacturers are creating lower-cost, lower-performance and higher-frame-rate cameras for industrial applications.

General trends

“There has been a whole new wave of cameras this past year that have broken that 10-frame-a-second barrier, and that’s made a huge difference,” said Brian Craze, manager of electronic imaging at A.G. Heinze Inc., a distributor in Lake Forest, Calif. Heinze markets microscopes from Nikon Inc. of Melville, N.Y., as well as imaging systems from a number of other companies. The advent of digital cameras that have near-video frame rates, he said, has led to significant changes in microscopy.


Digital microscopy on the factor floor requires much less from the camera. A lower list price and ease of use will beat out more advanced (and expensive) cameras. Viewed under polarized light at 50x, cast commercial-grade titanium looks like modern art. Courtesy of Diagnostic Instruments Inc.


Increasingly, industrial users are moving away from analog, video-based systems and associated printers to the digital camera and image-archival solutions now available to them. Craze cited recent products from Nikon, Diagnostic Instruments Inc., Leica Microsystems AG and Optronics as examples of industrial systems. Diagnostic Instruments also makes cameras for the scientific market. Others in this arena include Hamamatsu Corp., Roper Scientific Inc. and The Cooke Corp.


Lab researchers still demand less noise, better resolution and wider wavelength coverage from their cameras to see what they want. Here, fluorescence imaging reveals microtubules (green), actin filaments (red) and cell nuclei (blue) in bovine cells. Courtesy of Diagnostic Instruments.


Like Diagnostic Instruments, Sony Corp. makes microscope cameras for both industrial and scientific applications. But unlike many camera companies, Sony makes the sensors that are at the heart of digital imaging. Indeed, Sony’s CCDs show up in many companies’ cameras. As such, Sony has a unique perspective on the general market demands.


Advances in CCD technology are leading to the development of better microscope cameras for scientific applications and to their adoption on the factory floor, albeit at a lower level of sophistication. Courtesy of The Cooke Corp.


“The trend is not so much increasing the resolution but taking the usable resolutions now and building cameras at a lower cost,” said Paul Kasparian, a marketing manager at Sony Broadcast and Professional Co. in Park Ridge, N.J. Many applications demanded sensors with 1 million picture elements. Beyond the megapixel barrier, however, it is unclear whether adding elements enables the cameras to produce better images.

Reducing camera cost can come about in a variety of ways, said Patrick Merlo, president and head of research and development at Diagnostic Instruments in Sterling Heights, Mich.

“Larger, 1-in.-format CCDs allow the use of microscope couplers without lenses, since the image does not have to be reduced to fit a small CCD,” Merlo said. “This results in a lower-cost, more compact coupler.”

Better ins …

Further improvements to the CCD sensor and to the camera interface promise to affect cost, resolution and other camera characteristics. On the sensor side, some semiconductors under development could have a significant effect.

Mark Christenson, senior scientist in life sciences at Roper Scientific in Trenton, N.J., said that work on new sensor materials is under way at Texas Instruments Inc. in the US and Marconi plc in the UK. These separate product developments aim to amplify the CCD’s signal without using an external intensifier. The amplification could be on the order of 100 to 1000, depending on a variety of factors.

For microscope camera makers, such an improvement would enable a number of product enhancements, the least of which is higher resolution. Christenson noted that intensifiers add cost to the camera system and are a source of failure, such as when they are exposed to too much light.

“They can burn out and get burn spots on them … eventually, whereas CCDs typically don’t have the same kind of lifetime restrictions,” he said. Moreover, the use of an intensifier limits the available imaging formats.

But a number of problems must be solved before these CCDs appear in commercial products. For example, the pixels on the current crop of these sensors must be reduced from 20 μm or more on a side to less than 10 μm. Although such chips are in the pipeline, camera makers can’t start incorporating them in their products until they are real, available hardware. It will be at least a year or two before cameras based on the new CCDs hit the market.

s for CMOS, there is a great deal of interest — but little action. The consensus seems to be that CMOS sensors offer some potentially important improvements over CCDs, but that their image quality and other characteristics render them undesirable at present.

Karl Kilborn is co-president of system integrator Intelligent Imaging Innovations Inc. in Santa Monica, Calif. Like many others, Kilborn said that his company has not used CMOS technology. “We are, however, very interested in the technology and look forward to improvements,” he said. “The potential for random access of individual pixels is particularly interesting.”

Cognex Corp. - Smart Sensor 3-24 GIF MR

… And outs

Regarding the connection between a camera and a host computer, the trend is toward the elimination of old standards and the adoption of Apple Computer Inc.’s FireWire (known generically as IEEE-1394) and/or the USB 2.0 interface. The 400-Mb/s FireWire has generated much interest and is available on a number of components. At 480 Mb/s, USB 2.0 has a slightly higher throughput, and it may end up being just as popular, particularly because it supports first-generation USB devices. For camera makers, this may mean that they must support both standards.

The microscope camera industry is just entering this interface debate, said Jerry Fife, product manager for industrial and scientific cameras at Sony. Currently, Sony sells far more analog than digital cameras for microscopy. Analog cameras require frame grabbers for transferring images to a computer, and they may be limited to 640 x 480-pixel video resolution — much less than most microscopy applications need.

A faster interface would lead to increases in camera resolution. With higher transfer rates and decreasing storage costs, users will be able to manage more data, and some cost and performance barriers to higher resolution may disappear.

Until then, camera resolution is subject as much to what users can handle as it is to what they need for their applications. “The bulk of the volume is still in the half-a-megapixel to the one-and-a-half- to two-megapixel range, just because [there is] too much data to move around,” Fife said.

Eight is enough

A consequence of the advent of digital cameras, Heinze’s Craze said, has been the deployment of the systems in industrial microscopy applications. In many cases, they are replacing color photography, taken as part of in-line quality control during the manufacture of semiconductors, print heads, precision machined parts, electronic components or other equipment.

It’s an application with very specific requirements. “These people simply want a high-resolution, megapixel digital camera,” Craze said. “They use PCs exclusively. They want to capture an image and put it in a report. That’s about all they want to do. Every once in a while they want to do a point-to-point measurement.”

The industrial market requires megapixel or greater resolution, image rates in the range of 30 fps and full color, but it does not need a camera with a wide dynamic range. Eight bits is often enough, compared with 12 bits or more for scientific applications.

In the past, the only electronic replacement to the photograph for industrial applications involved video cameras, a television monitor and a video printer. Today, digital cameras — with their simplified interface and, at most, two button controls — are being increasingly used. It is a market that has attracted Heinze’s attention within the past few years and is catching the attention of camera vendors.

“Our future line of lower-end cameras would probably be more applicable to the industrial market, since this market is not as demanding when it comes to sensitivity or higher than 10 to 12 bits of dynamic range,” said Murad Karmali, sales manager at Cooke’s imaging division in Auburn Hills, Mich.

Merlo calls industry “the qualitative market” because of its need for pretty pictures. He, too, described the trend away from video cameras and toward digital cameras with real-time modes. He noted that the camera requirements are not exceptionally demanding in a technical sense but that the pressures on price and ease of operation can be quite high.

“This marketplace benefits greatly from increased spatial resolution combined with lower list prices,” Merlo said. “This marketplace requires intuitive, easy-to-use software.”

Consequently, the technically superior product may lose in the industrial arena to one that is less expensive and easier to operate. Moreover, the interface to the system is secondary to these applications — the interface to the human operating the camera is of overriding importance.

In the lab, more of the same

In scientific applications, however, users ask for more of what they have: reduced noise, higher quantum efficiency, higher speed, wider or multiple wavelength coverage, and better resolution.

Roper offers products for these applications that feature 6.45-μm pixels for higher resolution. Other cameras in the company’s product line combine higher sensitivity with higher frame rates by focusing the image sequentially on different parts of the CCD.

Diagnostic Instruments has a number of new cameras for the scientific market, as does Cooke in its SensiCam line. Cooke’s 12-bit cameras display low noise, thanks to cooling, extensive binning, on-chip region-of-interest selection capability and the use of a relatively new enhanced-quantum-efficiency CCD from Sony.

For its part, Hamamatsu has introduced a line of electron-bombardment cameras for scientific applications that offer signal amplification of 1000 times or more. The process starts with the electrons that are generated when a photon strikes a photocathode. A voltage accelerates these electrons and drives them into a back-thinned CCD.


Electron-bombardment cameras offer signal amplification of up to 1200 times for scientific applications. An applied voltage accelerates the electrons released from the photocathode into a back-thinned CCD. Courtesy of Hamamatsu Corp.


Fundamentals never change

No matter the technology improvements, the fundamental aim of microscopy will not change — users need to see what they are looking for.

James Lechleiter is an associate professor of cellular and structural biology at the University of Texas’ health science center in San Antonio and the director of the center’s optical imaging facility. Much of the work there is done using photomultiplier tubes; some involves microscopes and cameras.

Lechleiter and microscopists of all stripes are looking for a signal in a welter of noise. Success comes down to being able to identify and to focus on the desired object.

“The more signal that I have, the faster I can go, the higher resolution I can go,” Lechleiter said. “So that’s really what it comes down to.”

“And I want to do it cheaply, too,” he added.

Published: February 2002
FeaturesindustrialMicroscopySensors & Detectors

We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.