Search
Menu
Zurich Instruments AG - Boost Your Optics 1-24 LB

LECs May Be Future of Flat-Panel Displays

Facebook X LinkedIn Email
BOSTON, Sept. 3 -- The polymer light-emitting electrochemical cell (LEC) may be the next answer in the search for low-cost color displays that don't drain a computer’s battery, according to an international team of electrical engineers.

"The color-variable LEC can provide a solution to simple, low-cost color displays," said Cheng Huang, a graduate student in electrical engineering at Penn State, at the 224th American Chemical Society annual meeting held last month in Boston.

Huang, working with Gang Huang, Suzhou University; J. Guo and Chang-Zheng Yang, Nanjing University; and Wei Huang and E.T. Kang, National University of Singapore; investigated color tunable light-emitting devices and the attributes necessary for any organic or polymer electroluminescent device used to provide full-color displays. Devices for flat-panel, full-color displays must have high luminance intensity and efficiency, full-color capability, fast response time and the ability to avoid crosstalk. Also important for these high-performance content displays is the quality of the image on the display, which means high contrast ratio, wide color gamut and long-term stability.

"Achievement of color tunability in light-emitting devices is important for multicolor or full-color displays, and various approaches for LEC development have been tried," Huang said. "The dual- or multi-colored polymer LEC is a new direction for light-emitting devices fabricated from semiconducting electroluminescent polymers."

LECs are made of a blend of polymers, including a semiconducting luminescent polymers and a polyelectrolyte, as well as two metallic electrodes. When the proper voltage is applied to the electrodes, a p-n junction forms in place and the luminescent polymer emits light.

Polymer LECs have many advantages for flat-panel, full-color displays. The researchers developed a voltage-controlled, two-color bipolar, fast-response LEC based on ionic conductive poly (phenylene vinylene) derivatives. They used a bilayer structure -- different luminescent polymers -- sandwiched between two electrodes. The change in bias voltage moved the p-n junction from one polymer layer to the other, causing the LEC to emit either red/orange light or yellow/green light. The response time for light emission was well within the requirements of a flat-panel display.

Full-color representation relies on the combination of three light colors: red, green and blue. To obtain true full color, the pure red, green and blue must be the exact required wavelengths, and efficient, stable electroluminescent polymer materials must be developed, so that when they are combined in varying combinations they create all possible colors. While the researchers have not created the proper red or green and don't have a blue LEC yet, they have created one cell that can produce both a yellow and a red. They also have created an LEC that responds in less time than the human eye can notice, satisfying the response time requirement.

For more information, visit: www.psu.edu

Meadowlark Optics - Building system MR 7/23

Published: September 2002
ConsumerNews & Features

We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.