Search Menu
Photonics Media Photonics Buyers' Guide Photonics EDU Photonics Spectra BioPhotonics EuroPhotonics Industrial Photonics Photonics Showcase Photonics ProdSpec Photonics Handbook
More News
Email Facebook Twitter Google+ LinkedIn Comments

Photonic Bandgap Fiber Makes Unique Gas Sensor

Photonics Spectra
Nov 2004
Breck Hitz

Many approaches to making gas sensors from optical fibers have been explored during the past 20 years, and scientists at Virginia Polytechnic Institute in Blacksburg recently developed a novel gas sensor based on a random-hole photonic crystal fiber. Now a collaboration of experimenters at Helsinki University of Technology in Otaniemi, Finland; the Danish Institute of Fundamental Metrology in Lyngby, Denmark; Technical University of Denmark, also in Lyngby; and Crystal Fibre A/S in Birkerød, Denmark, has reported a gas sensor based on a photonic bandgap fiber.

Photonic Bandgap Fiber Makes Unique Gas Sensor
Figure 1. The photonic bandgap fiber had a hollow core that could be filled with gas.

Photonic crystal and photonic bandgap fibers are both members of the family of microstructured fibers or, as they are known colloquially, holey fibers. But there is a fundamental difference between the two. In a photonic crystal fiber, the effective refractive index of the cladding is lowered by a series of airholes running the length of the fiber, and light is guided in the core by total internal reflection.

In a photonic bandgap fiber, however, the periodicity of the airholes in the cladding creates a region in which photons of given energy cannot exist, so light is guided in the core because it cannot exist in the cladding. The physics of a photonic bandgap fiber is analogous to that of a semiconductor, in which the crystal periodicity creates a region where electrons of given energy cannot exist.

Photonic Bandgap Fiber Makes Unique Gas Sensor
Figure 2. The photonic bandgap in the fiber's cladding guided light from ~1400 to ~1600 nm.

To make their gas sensor, the scientists in Finland and Denmark first fabricated a hollow-core, photonic bandgap fiber for the 1500-nm spectral range (Figures 1 and 2). They spliced one end of the bandgap fiber to a conventional single-mode fiber from an optical source (either a laser or an LED) and placed the other end in a V-groove in a vacuum chamber. Fifty microns away from the end in the V-groove, they placed a multimode fiber leading to a detector (Figure 3). The separation allowed gas to flow into or out of the hollow core of the bandgap fiber while still allowing for efficient optical coupling between the fibers.

Photonic Bandgap Fiber Makes Unique Gas Sensor
Figure 3. A 50-µm gap between the photonic bandgap fiber and the multimode fiber allowed gas to flow into and out of the hollow core of the former.

To test the sensor, they filled a 1-m length of the fiber with acetylene to a pressure of 10 mbar and illuminated it with a tunable laser, scanning the laser in 1-pm steps from 1524 to 1538 nm. They observed the expected spectrum of acetylene in that spectral range, with a signal-to-noise ratio better than 20 dB (Figure 4, left).

To compare the fiber sensor with a more traditional approach, they made a similar measurement of acetylene in a 1-m gas cell, employing the same laser (Figure 4, right). The slightly inferior signal-to-noise with the fiber is the result of vibrations and reflections from the end of the fiber.

Photonic Bandgap Fiber Makes Unique Gas Sensor
Figure 4. Although the spectrum of acetylene taken with the fiber sensor (left) had slightly poorer signal-to-noise than the spectrum taken in a conventional gas cell (right), the fiber is a much smaller, more rugged and less expensive sensor.

They believe that the signal-to-noise ratio may be improved in later experiments. However, even without improvement, a slight decrease in signal quality would be a small price to pay in many applications for the inherent advantages of the fiber-based sensor: small size, ruggedness and low cost.

The science of measurement, particularly of lengths and angles.
gas sensorsmetrologynovel gas sensoroptical fibersphotonic crystal fiberResearch & TechnologySensors & DetectorsVirginia Polytechnic Institute

Terms & Conditions Privacy Policy About Us Contact Us
back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2019 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA,

Photonics Media, Laurin Publishing
x Subscribe to Photonics Spectra magazine - FREE!
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.