Search Menu
Photonics Media Photonics Buyers' Guide Photonics EDU Photonics Spectra BioPhotonics EuroPhotonics Industrial Photonics Photonics Showcase Photonics ProdSpec Photonics Handbook
More News
Email Facebook Twitter Google+ LinkedIn Comments

Photolithography Improved Without UV Light
Apr 2009
by Rebecca C. Jernigan

COLLEGE PARK, Md. – As computer chips become smaller and more powerful, it is important that their features remain precise. The fact that smaller light wavelengths create smaller features has demanded that developers and manufacturers use expensive and difficult to work with ultraviolet light as the basis for such photolithographic nanofabrication – until now.

All images are schematic depictions of RAPID lithography, the technique developed by University of Maryland professor John Fourkas and colleagues which enables the creation of features 2500 times smaller than the width of a human hair. (Images courtesy John T. Fourkas, professor of chemistry and biochemistry, University of Maryland)

Researchers at the University of Maryland College of Chemical and Life Sciences, in the pursuit of improving the resolution of multiphoton absorption polymerization, have developed a tabletop technique called RAPID (Resolution Augmentation through Photo-Induced Deactivation) photolithography that removes ultraviolet light from the equation. Though inadvertent, the discovery could have applications in many areas, including electronics, optics and biomedical devices.

The investigators used 800-nm light from two tunable titanium:sapphire lasers to both harden a substance and to prevent it from hardening, which enabled them to sculpt features 2500 times smaller than the width of a human hair.

Multiphoton absorption of a pulsed 800-nm light is used to initiate crosslinking in a polymer photoresist, hardening it in place in a way that is similar to that used by dentists when filling a cavity, according to John T. Fourkas, one of the researchers. At the same time, one-photon absorption of continuous-wave 800-nm light prevents the photoresist from hardening.

RAPID2.jpgThe researchers used spatial phase shaping of the latter beam to control the area that was affected, in a manner similar to that used in stimulated emission depletion (STED) fluorescence microscopy. The use of continuous-wave light for shaping simplified the process, as users would not need to develop precise timing between the exitation and deactivation beams like they would if both beams were pulsed.

In traditional photolithography, the resolution is limited to around one-fourth of the wavelength, due to diffraction. In the university team's approach, it is possible to make patterns that are one-twentieth the size (along the optical axis) of the wavelength used, enabling the creation of much smaller features with larger light wavelengths. This was achieved using a specific phase mask to manipulate the deactivation beam. The scientists believe that by choosing a different phase mask, the same size feature could be achieved along the transverse axis, and by using two phase-masked beams the measurement could be achieved in all dimensions.

RAPID.gifIn principle, the technique could enable users to create 3-D nanostructures with features ranging from tens of microns down to 40 nm. Fourkas, who led the research, believes that with further developments and refinements RAPID could shrink the feature resolution to as low as 20 nm, which could make nanopatterning useful in a variety of new applications.

Though there is still room for improved materials and better two-dimensional spatial light modulators could make the technique easier to implement, Fourkas is pleased with the team's discovery. "In the way that we have implemented it, RAPID is far easier than we had ever imagined it could be."

Rebecca C. Jernigan

The transfer of energy from an incident electromagnetic energy field with wavelength or frequency to an atomic or molecular medium.
1. A bundle of light rays that may be parallel, converging or diverging. 2. A concentrated, unidirectional stream of particles. 3. A concentrated, unidirectional flow of electromagnetic waves.
That branch of science involved in the study and utilization of the motion, emissions and behaviors of currents of electrical energy flowing through gases, vacuums, semiconductors and conductors, not to be confused with electrics, which deals primarily with the conduction of large currents of electricity through metals.
The emission of light or other electromagnetic radiation of longer wavelengths by a substance as a result of the absorption of some other radiation of shorter wavelengths, provided the emission continues only as long as the stimulus producing it is maintained. In other words, fluorescence is the luminescence that persists for less than about 10-8 s after excitation.
In a periodic function or wave, the segment of the period that has elapsed, measured from some fixed origin. If the time for one period is expressed as 360° along a time axis, the phase position is called the phase angle.
A lithographic technique using an image produced by photography for printing on a print-nonprint, sectioned surface.
A quantum of electromagnetic energy of a single mode; i.e., a single wavelength, direction and polarization. As a unit of energy, each photon equals hn, h being Planck's constant and n, the frequency of the propagating electromagnetic wave. The momentum of the photon in the direction of propagation is hn/c, c being the speed of light.
A chemical substance rendered insoluble by exposure to light. By means of a photoresist, a selected pattern can be imaged on a metal. The unexposed areas are washed away and are ready for etching by acid or doping to make a microcircuit.
Process of synthesizing long molecular chain materials (polymers) by reaction of many small molecules (usually thousands) called monomers.
1. In optics, the ability of a lens system to reproduce the points, lines and surfaces in an object as separate entities in the image. 2. The minimum adjustment increment effectively achievable by a positioning mechanism. 3. In image processing, the accuracy with which brightness, spatial parameters and frame rate are divided into discrete levels.
absorptionBasic SciencebeambiomedicalelectronicsFeaturesfluorescenceindustrialJohn FourkasMicroscopymultiphotonnanofabricationnanopatterningnanostructuresNews & FeaturesopticsphasephotolithographicphotolithographyphotonphotoresistpolymerizationRAPIDresolutionSTEDultravioletUVwavelength

Terms & Conditions Privacy Policy About Us Contact Us
back to top

Facebook Twitter Instagram LinkedIn YouTube RSS
©2018 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA,
x We deliver – right to your inbox. Subscribe FREE to our newsletters.
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.