Search
Menu
Deposition Sciences Inc. - Difficult Coatings - LB - 8/23

Brighter lights lead to better communications under the sea

Facebook X LinkedIn Email
Hank Hogan, [email protected]

Future oceanographic research could be done more cheaply and efficiently, thanks to a communication innovation powered by the latest LEDs and detectors. Researchers from Woods Hole Oceanographic Institution used these in a demonstration of remote optical communication under water, which they described at the 2010 Ocean Sciences Meeting in Portland, Ore. Unlike acoustic communication techniques that have been the standard, the new approach is fast enough for video.

“We’ve done that, certainly. It’s compressed video,” said team leader Norman E. Farr. “We can transmit anywhere from, say, 500 kilobits to 15 megabits per second. That’s all based on range, rate, power and water clarity.”


Underwater data communication by light is shown in this artist’s conception of how the optical modem could function at a deep-ocean-cabled observatory. Autonomous underwater vehicles (in yellow) collect sonar images (downward bands of light) and other data at a hydrothermal vent site and transmit this through an optical modem to receivers stationed on moorings in the ocean. The moorings connect to a cabled observatory, and the data is sent back to shore. Scientists, in turn, can send new instructions to the vehicles via the optical modem. Illustration by E. Paul Oberlander, Woods Hole Oceanographic Institution.


A senior engineer at Woods Hole, Farr explained that the limit of the optical communication link would be 200 m in clear water. In particulate-laden water, the distance would be less. In either case, the rate would be at the low end of the speed at the extremes in range. At shorter distances between transmitter and receiver, the data rates would be higher.

Typically, underwater communication is done using sound, not light. The acoustic approach offers the advantage of working over great distances. That plus is balanced by slow data rates and transmission, the latter a result of the slow speed of sound in water and the former, of sound’s wavelength.

These constraints mean that oceanographic research is done with tethered remote-operated vehicles. The cabling provides video and data connections, but the cost is a more expensive remote vehicle and support ship. Better and faster communication would allow the cable to be cut.

For an optical data link, the Woods Hole team needed a light source in the visible, from about 400 to 500 nm. That’s the window for transmission through water. The source had to be low-powered because it would have to run in battery-powered systems. And because of size constraints, it also had to be compact. Finally, it had to be able to be modulated rapidly, as that would determine the maximum data rates possible.

PI Physik Instrumente - Revolution In Photonics Align LW MR3/24

In developing a solution, the researchers used recently available high-power LEDs. They put these into a hemispherical transmitter, choosing this approach over the alternative of a tight beam because it offered better total performance.

For a receiver, they used photomultiplier tubes, selecting them over avalanche photodiodes because of their sensitivity. They placed bandpass filters before the receiver to suppress everything not in the signal transmission window. As for the rest of the optics, they built these so that the receiver, as with the transmitter, would operate over a hemisphere.

For remotely operated vehicles, communication by light and sound ensures that vessels don’t lose contact, Farr said. “As soon as you’re outside of the optical hemisphere, you still have acoustic communications, so you can get the vehicle back into high-bandwidth range.”

Tests have indicated that the system allows video, an important point, as many of the applications assume a human will be in the loop for control. For example, a pilot might steer a remote vehicle to a location near a hydrothermal vent with the intention of collecting samples and making measurements. To do that, the pilot must be able to see what is going on in real time. In practice, this might be done by having a surface ship on station above the vent, with a line containing an optical transmitter/receiver lowered to about 100 m above the point of interest.

This July, a Woods Hole team will conduct the first large-scale deployment of the system at the Juan de Fuca ridge off the northwestern US. There it will be used to collect and transmit data from wellheads situated near the undersea ridge. Expectations are that the system will last for several years, but part of the reason for the deployment is to test that.

As for the future, Farr noted that longer distances may be possible with brighter LEDs, more sensitive receivers or both. Data rates could go up as well, with higher LED modulation rates.

However, there are limits, he said. “You get to the point where you start to get dispersion because of multipath in the water. But we’re nowhere near that.”

Published: May 2010
Glossary
avalanche photodiode
A device that utilizes avalanche multiplication of photocurrent by means of hole-electrons created by absorbed photons. When the device's reverse-bias voltage nears breakdown level, the hole-electron pairs collide with ions to create additional hole-electron pairs, thus achieving a signal gain.
bandpass
The range of frequencies that will pass through a filter or other device. Synonymous with passband.
photodiode
A two-electrode, radiation-sensitive junction formed in a semiconductor material in which the reverse current varies with illumination. Photodiodes are used for the detection of optical power and for the conversion of optical power to electrical power. See avalanche photodiode; PIN photodiode.
photomultiplier tube
A photomultiplier tube (PMT) is a highly sensitive vacuum tube that detects and amplifies low levels of light. It is widely used in various applications where high sensitivity, fast response times, and low-light detection capabilities are crucial. Photomultiplier tubes are particularly valuable in scientific research, medical diagnostics, and industrial instrumentation. Key features and principles of PMTs include: Photoelectric effect: The operation of a photomultiplier tube is based on the...
receiver
A detector and signal demodulator used in optical communications systems to receive a signal and often to translate it into an electronic signal.
transmitter
In fiber optic communications, a light source whose beam can be modulated and sent along an optical fiber, and the electronics that support it.
wavelength
Electromagnetic energy is transmitted in the form of a sinusoidal wave. The wavelength is the physical distance covered by one cycle of this wave; it is inversely proportional to frequency.
acousticacoustic communicationavalanche photodiodebandpassCommunicationscompressed videodetectorsdistanceFiltersHank HoganHemispherekilobitLight Emitting DiodeLight SourcesmegabitNorman FarrOcean Sciences Meetingoceanographicoptical communicationOptical Data LinkOpticsOregonparticulatephotodiodephotomultiplier tubereal timereceiverremotely operated vehicleResearch & TechnologySensors & Detectorssoundspeed of soundsurface shipTech PulseTest & Measurementtransmitterunderwater communicationUnited Stateswater claritywavelengthWoods Hole Oceanographic InstitutionLEDs

We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.