Search Menu
Photonics Media Photonics Buyers' Guide Photonics Spectra BioPhotonics EuroPhotonics Vision Spectra Photonics Showcase Photonics ProdSpec Photonics Handbook
More News

Etched Quantum Dots Emit Single Photons

Facebook Twitter LinkedIn Email Comments
GAITHERSBURG, Md., March 14, 2011 — An etching method has been revealed that can precisely shape and position quantum dots, making it possible for them to emit single photons. This process could boost prospects for powering new types of devices for quantum communications.

The conventional way to build quantum dots is to grow them like crystals in a solution, but this somewhat haphazard process results in irregular shapes. The new, more precise process uses electron beam lithography and etching to carve quantum dots inside a quantum well — semiconductor sandwich — that confines particles in two dimensions. Lithography controls the dot's size and position, while sandwich thickness and composition, as well as dot size, can be used to tune the color of the dot's light emissions.

Colorized micrograph of quantum dots made using electron beam lithography and etching. This type of quantum dot can be shaped and positioned more reliably than dots made with conventional crystal growth methods. (Image: Verma/NIST)

The process was developed by the National Institute of Standards and Technology (NIST) postdoctoral researcher Varun Verma while he was a student at the University of Illinois.

Some quantum dots are capable of emitting individual, isolated photons on demand, a crucial trait for quantum information systems that encode information by manipulating single photons. The NIST tests demonstrated that the lithographed and etched quantum dots do indeed work as sources of single photons. The tests were performed on dots made of indium gallium arsenide. Dots of various diameters were patterned in specific positions in square arrays. Using a laser to excite individual dots and a photon detector to analyze emissions, NIST researchers found that dots 35 nm wide, for instance, emitted nearly all light at a wavelength of 888.6 nm. The timing pattern indicated that the light was emitted as a train of single photons.

NIST researchers now plan to construct reflective cavities around individual etched dots to guide their light emissions. If each dot can emit most photons perpendicular to the chip surface, more light can be collected to make a more efficient single-photon source. Vertical emission has been demonstrated with crystal-grown quantum dots, but these dots can't be positioned or distributed reliably in cavities. Etched dots offer not only precise positioning but also the possibility of making identical dots, which could be used to generate special states of light such as two or more photons that are entangled, a quantum phenomenon that links their properties even at a distance.

The quantum dots tested in the experiments were made at NIST. A final step was carried out at the University of Illinois, where a crystal layer was grown over the dots to form clean interfaces.

For more information, visit:
Mar 2011
AmericasCommunicationselectron beam lithographyetched quantum dotsindustriallight emissionslight sourcesMarylandNISTquantum communicationsquantum wellResearch & TechnologySensors & Detectorssingle photonsUniversity of IllinoisVarun Verma

back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2019 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA,

Photonics Media, Laurin Publishing
x We deliver – right to your inbox. Subscribe FREE to our newsletters.
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.