Search Menu
Photonics Media Photonics Buyers' Guide Photonics Spectra BioPhotonics EuroPhotonics Vision Spectra Photonics Showcase Photonics ProdSpec Photonics Handbook
More News

Coating allows UV rays to hit CMOS sensors

Facebook Twitter LinkedIn Email Comments
Compiled by EuroPhotonics staff

Silicon nitride coatings block ultraviolet and blue light, making image sensors ill-equipped for spectroscopy applications. But a new production process renders the coatings transparent, making the sensors suitable for special applications.

CMOS image sensors are no longer used only in cell phones and digital cameras: They are making rapid inroads in high-performance applications. For example, the automotive industry has discovered the potential of optical semiconductor chips and is increasingly using them in driver-assistance systems – from parking aids and lane detection to blind-spot warning devices.

In special applications, however, the sensors that convert light into electrical signals must operate in difficult conditions such as high temperature, moisture, mechanical influences and impurities. For this reason, CMOS devices are covered with a silicon nitride coating applied in the final stage of production. The coating process is called passivation and is now an industry requirement. Although passivation addressed the temperature and moisture barriers, another problem needed tackling: The silicon nitride coating limits the range of optical applications because it is impermeable to light in the UV and blue spectral ranges.

Scientists have developed a UV-transparent coating for image sensors. Courtesy of Fraunhofer IMS.

Scientists at Fraunhofer Institute for Microelectronic Circuits and Systems have developed a coating that has the same properties but that is permeable to blue and UV light. By increasing the proportion of nitrogen in the coating, they reduced the absorption of shortwave light. They say the new coating material absorbs less light of an energy higher than blue light, which means the sensors become more sensitive at the blue and UV ranges.

To change the structure of the silicon nitride for the coating, they had to fine-tune the deposition parameters such as pressure and temperature. Their discovery has made CMOS image sensors suitable for use at wavelength ranges down to 200 nm. Standard passivation allowed for a limit of only about 450 nm.

The range of applications for CMOS image technology now has expanded, potentially revolutionizing UV spectroscopic methods that are used in laboratories around the world. The sensors could play a new role in professional microscopy; e.g., in fluorescence microscopes, they could provide scientists with images in even greater detail.

May 2011
blue lightcamerasCMOSCMOS image sensorsCMOS semiconductor productioncoatingsEuro NewsEuropefluorescence microscopesFraunhofer Institute for Microelectronic Circuits and Systems IMSGermanyimage sensorsimagingMicroscopyNewsopticsSensors & Detectorssilicon nitride coatingspectroscopyUV lightUV spectroscopic methodsUV transparent coatings

back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2019 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA,

Photonics Media, Laurin Publishing
x Subscribe to EuroPhotonics magazine - FREE!
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.