Search Menu
Photonics Media Photonics Marketplace Photonics Spectra BioPhotonics Vision Spectra Photonics Showcase Photonics ProdSpec Photonics Handbook
Lambda Research Optics, Inc. - Mission

Nanodiamonds are a circuit’s best friend

Facebook Twitter LinkedIn Email
Ashley N. Paddock, [email protected]

Diamonds are now an electrical engineer’s best friend: The iridescent, sturdy diamond can improve the design of computer chips and electronic circuitry for extreme environments.

Vanderbilt University engineers have developed the basic components needed to create microelectronic devices out of thin films of nanodiamond, including diamond versions of transistors and, most recently, logic gates.

Diamond-based devices have the potential to operate at higher speeds and require less power than silicon-based devices. Nanodiamond circuits are a hybrid of old-fashioned vacuum tubes and modern solid-state microelectronics, combining some of the best qualities of both technologies.

Graduate students Nikkon Ghosh (front) and William Paxton working in the cleanroom where nanodiamond circuits are prepared. Courtesy of Joe Howell, Vanderbilt University.

Potential applications for the new devices include military electronics, circuitry that operates in space, ultrahigh-speed switches, ultralow-power applications, and sensors that operate in high-radiation environments at extremely high temperatures (up to 900 °F) and extremely low temperatures (down to –300 °F).

The design uses diamond film, but incorporating it is not expensive. Because of their small size, about 1 billion devices can be fabricated from a 1-carat diamond. The engineers used a chemical vapor deposition method to create the films from methane and hydrogen. As a result, the cost of producing the nanodiamond device should be competitive with silicon, the scientists say.

Professor Jimmy Davidson stands behind a chemical vapor deposition machine used to create nanodiamond transistors. Courtesy of Daniel Dubois, Vanderbilt University.

Professor Jimmy Davidson said the new concept offers an alternative approach to achieving electronic function in extreme environments – not currently possible or compromised by the limitations of silicon, silicon carbide and others. These include down-hole oil exploration, sensors and electronics, and nuclear environs such as solar, deep space, reactors and electromagnetic pulses. He is hopeful that, with maturation, the devices will improve power electronics by being drivable to higher currents and temperatures.

The research was supported by grants from the US Army and appeared in the Aug. 4 issue of Electronics Letters (doi: 10.1049/el.2011.2314).

Photonics Spectra
Oct 2011
That branch of science involved in the study and utilization of the motion, emissions and behaviors of currents of electrical energy flowing through gases, vacuums, semiconductors and conductors, not to be confused with electrics, which deals primarily with the conduction of large currents of electricity through metals.
Americaschemical vapor depositiondeep spacedefensediamond computer chipsdiamond filmelectronic circuitry for extreme environmentselectronicsenergyJim Davidsonmicroelectronic devicesmilitary electronicsnanonanodiamond circuitsnanodiamondsopticsResearch & TechnologySensors & Detectorssiliconsilicon carbidesilicon limitationssilicon-based devicessolarsolid-state microelectronicsTech PulseTennesseethin filmsUS ArmyVanderbilt University

back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2022 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA, [email protected]

Photonics Media, Laurin Publishing
x Subscribe to Photonics Spectra magazine - FREE!
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.