Search Menu
Photonics Media Photonics Buyers' Guide Photonics EDU Photonics Spectra BioPhotonics EuroPhotonics Industrial Photonics Photonics Showcase Photonics ProdSpec Photonics Handbook
More News
Email Facebook Twitter Google+ LinkedIn Comments

Nanowafer tunable for optimal light absorption

Photonics Spectra
Oct 2013
A nanoengineered wafer that can be optimally tuned for light absorption is the thinnest, most efficient absorber of visible light to date, report engineers at Stanford University.

“Achieving complete absorption of visible light with a minimal amount of material is highly desirable for many applications, including solar energy conversion to fuel and electricity,” said Stacey Bent, a professor of chemical engineering at Stanford and a member of the research team. “Our results show that it is possible for an extremely thin layer of material to absorb almost 100 percent of incident light of a specific wavelength.”

These four wafers contain the thinnest light-absorber layer ever built. Photo courtesy of Mark Shwartz, Stanford University

Because they require less material, thinner solar cells cost less. The challenge lies in reducing the thickness of the cell without compromising its ability to absorb and convert sunlight into energy. An ideal solar cell would absorb the entire visible spectrum, as well as the UV and IR.

The Stanford investigators, which included postdoc Carl Hagglund, found that they could tune gold nanodots to absorb 99 percent of the reddish-orange light at the 600-nm wavelength.

“We tuned the optical properties of our system to maximize the light absorption,” said Hagglund, lead author of a the recent study. “We also achieved 93 percent absorption in the gold nanodots themselves. The volume of each dot is equivalent to a layer of gold just 1.6 nm thick, making it the thinnest absorber of visible light on record – about 1000 times thinner than commercially available thin-film solar cell absorbers.”

The wafers were fabricated at a nearby Hitachi facility via block-copolymer lithography, with a thin-film coating atop the wafers added via atomic layer deposition. “That allowed us to tune the system simply by changing the thickness of the coating around the dots,” Hagglund said. “People have built arrays like this, but they haven’t tuned them to the optimal conditions for light absorption.”

The previous record holder required an absorber layer three times thicker to reach total light absorption, he added. “So we’ve substantially pushed the limits of what can be achieved for light harvesting by optimizing these ultrathin, nanoengineered systems.”

This is a cross section of the record-thin absorber layer showing three gold nanodots, each about 14 × 17 nm in size and coated with tin sulfide. Photo courtesy of Carl Hagglund, Stanford University

The three types of coatings they applied – tin sulfide, zinc oxide and aluminum oxide – are not light-absorbing, Hagglund said. “But it has been shown theoretically that if you apply a semiconductor coating, you can shift the absorption from the metal particles to the semiconductor materials. That would create more long-lived energetic charge carriers that could be channeled into some useful process, like making an electrical current or synthesizing fuel.”

The next step is to demonstrate that the technology can be used in actual solar cells.

“We are now looking at building structures using ultrathin semiconductor materials that can absorb sunlight,” said Bent, co-director of the Stanford Center on Nanostructuring for Efficient Energy Conversion. “These prototypes will then be tested to see how efficiently we can achieve solar energy conversion.”

They are also considering nanodot arrays made of less-expensive metals. “We chose gold because it was more chemically stable for our experiment,” Hagglund said. “Although the cost of the gold was virtually negligible, silver is cheaper and better from an optical point of view if you want to make a good solar cell. Our device represents an orders-of-magnitude reduction in thickness. This suggests that we can eventually reduce the thickness of solar cells quite a lot.”

Their results are published online in Nano Letters (doi: 10.1021/nl401641v).

AmericasBasic ScienceCaliforniaCarl Hagglundcoatingsenergylight absorptionMaterials & ChemicalsnanoNano Lettersnanodotsnanoengineeringoptical propertiesResearch & TechnologysolarStacey BentStanfordTech Pulse

Terms & Conditions Privacy Policy About Us Contact Us
back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2018 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA,

Photonics Media, Laurin Publishing
x Subscribe to Photonics Spectra magazine - FREE!
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.