Search
Menu
AdTech Ceramics - Ceramic Packages 1-24 LB

IR Thermal Imaging Improves Inspection of Radiation Shields

Facebook X LinkedIn Email
Infrared thermal imaging has been used as a tool to detect defects in lead aprons meant to shield patients' vital organs from radiation exposure. The IR imaging technology reduces ionizing radiation exposure for inspectors who check the protective lead aprons.

Unlike the fingertips, infrared light can penetrate the lead apron's protective outer fabric and illuminate defects that are smaller than the defect size now used to reject a protective apron.
Unlike the fingertips, infrared light can penetrate the lead apron's protective outer fabric and illuminate defects that are smaller than the defect size now used to reject a protective apron. Courtesy of Children's National Health System.


The research was published in the Journal of the American College of Radiology by researchers at the Children’s National Health System.

"When I researched how lead aprons are inspected, I learned that a combination of tactile and visual inspection is considered the gold standard,” said Stanley Thomas Fricke, radiation safety officer at Children's National Health System and study senior author. "But many of the smallest holes can be missed this way. Unlike the fingertips, infrared light can penetrate the lead apron's protective outer fabric and illuminate defects that are smaller than the defect size now used to reject a protective apron. This work challenges conventional wisdom and offers an inexpensive, readily available alternative."

According to the study team, a growing number of healthcare settings use radiation-emitting imaging, from the operating room to the dentist's office. Lead aprons and gonadal shields lower radiation doses experienced by healthcare staff and patients. In compliance with regulators, these protective devices are inspected regularly. A layer of lead inside keeps patients' exposure to ionizing radiation at the lowest detectable level. The aprons are covered with nylon or polyester fabric for the patients' comfort and for ease of cleaning.

"It is standard for healthcare institutions to use a tactile-visual approach to inspect radiation protective apparel," Fricke says. "While increasingly common, that inspection method can allow aprons with holes and tears to slip by undetected due to the large surface area that needs to be inspected, the outer fabric that encloses the protective apron and other factors."

BAE Systems Sensor Solutions - Fairchild - FS Sensor Solutions 4/24 MR

Fricke recalled a news clip from years ago about an IR camera used to film swimmers at the pool that, like Superman's powerful vision, could see through pool-goers' clothing. The manufacturer quickly recalled the camera. But the IR technology is a perfect fit for inspectors looking for defects hidden under a lead apron's fabric cover.

The team drilled a series of nine holes ranging from 2 mm to 35 mm in diameter into a "phantom" lead apron and enclosed it within fabric that typically covers the protective shielding. The research team stapled the phantom apron to a wooden frame and placed dry wall under the frame. Two of 31 radiation workers picked out all nine holes by touch and recorded the holes and their locations on written questionnaires.

For the IR method, the team used an IR light to illuminate the lead apron from behind and relied on an infrared imaging camera to record 10 s of video from which still images were exported. Ten of 20 radiation technologists, radiology nurses and medical doctors identified all nine holes using those color photographs and recorded their entries on a questionnaire. An additional 20 percent identified eight of nine intentional defects to the phantom apron. In both the tactile and IR groups, all participants found the largest hole and correctly recorded its location.

"Using the tactile method for inspection, most staff who work regularly with radiation-emitting devices were able to identify defects that would cause a lead apron to be rejected, which is 11-mm holes for thyroid shields and 15-mm holes for aprons," Fricke said. "However, it is standard for these well-used aprons to develop smaller holes – which, over time, become bigger holes. Here at Children's National, we care about every photon that touches a child."

In the next phase of the research, the team will explore infrared flash photography, cooling the apron material and the impact of high-resolution cameras with greater depth of field.

Published: November 2017
BusinessChildren’s National Health SystemImagingMaterialsthermalResearch & TechnologypublicationsAmericasBiophotonicsBioScan

We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.