Close

Search

Search Menu
Photonics Media Photonics Buyers' Guide Photonics EDU Photonics Spectra BioPhotonics EuroPhotonics Industrial Photonics Photonics Showcase Photonics ProdSpec Photonics Handbook
More News
share
Email Facebook Twitter Google+ LinkedIn Comments

Optical Fibers Can Detect Type of Materials Around Them

Photonics.com
Jul 2018
LAUSANNE, Switzerland, July 31, 2018 — Forward stimulated Brillouin scattering (FSBS), because of its resonating transverse acoustic waves, has the potential to facilitate detections in an optical fiber’s surroundings. Researchers have now demonstrated a technique to measure the distributed FSBS spectrum of an optical fiber and retrieve the local acoustic impedance of the surrounding materials.

Researchers at Ecole Polytechnique Fédérale de Lausanne (EPFL) observed that the hyper-frequency wave that regularly bounces off the fiber’s walls creates an echo that varies, depending on the material the acoustic wave comes into contact with. The echoes leave an imprint on the light that can be read when the beam exits the fiber, making it possible to map out the fiber’s surroundings. This imprint is so faint that it hardly disturbs the light propagating within the fiber. According to researchers, the method could be used to sense what is going on around a fiber and send information at the same time.

The optical fibers are capable of detecting what sort of material or liquid they have come into contact with. Courtesy of EPFL/Desmond Chow.
The optical fibers are capable of detecting what sort of material or liquid they have come into contact with. Courtesy of EPFL/Desmond Chow.

To test the technique, researchers immersed optical fibers first in water and then in alcohol, before leaving them out in the open air. Each time, the fiber was able to correctly sense the change in its surroundings. According to researchers, the acoustic impedances of water and ethanol obtained by their technique agree well with the reported standard values.

Changes in the fiber’s surroundings are located using a time-based method.

“Each wave impulse is generated with a slight time lag," said professor Luc Thévenaz. "And this delay is reflected upon the beam's arrival. If there were any disturbances along the way, we can both see what they were and determine their location. For the moment, we can locate disturbances to within around 10 meters, but we have the technical means to increase our accuracy to one meter.” 

According to researchers, until now it has not been possible to determine changes and events in a fiber’s surroundings without light escaping from the fiber and disrupting its path.

The team’s experimental results show that the distributed acoustic impedance measurements of a material are possible using the FSBS optoacoustic interaction, without direct interaction between light and the external material.

“Our technique will make it possible to detect water leakages, as well as the density and salinity of fluids that come into contact with the fiber,” said Thévenaz. "There are many potential applications."

The research was published in Nature Communications (doi: 10.1038/s41467-018-05410-2).

GLOSSARY
optical communications
The transmission and reception of information by optical devices and sensors.
Research & TechnologyeducationEuropefiber opticsoptical fibersmaterialsopticsSensors & DetectorsindustrialenvironmentCommunicationsoptical communicationsimagingnonlinear opticsphotoacousticsopto-acousticoptical sensorsEPFLLuc Thévenaz

Comments
Terms & Conditions Privacy Policy About Us Contact Us
back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2018 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA, info@photonics.com

Photonics Media, Laurin Publishing
x We deliver – right to your inbox. Subscribe FREE to our newsletters.
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.