Sony Facility to Make LED Streetlights

Edmund Optics established a 34,000-sq-ft laser optics center in Oldsmar, Fla. The center is dedicated to manufacturing optical components with high laser damage thresholds from the ultraviolet to the...

SPIE’s Awards Committee has named the recipients of its annual awards, recognizing achievements and service in photonics research, education, and industry. The awards span a broad range of...

Technologies like integrated signal distributing, processing, and sensing networks require basic optical elements such as waveguides, splitters, gratings, and optical switches to be miniaturized....

The Netherlands’ Photonic Integration Technology Center (PITC) has launched a dedicated metrology program, aimed at developing design-for-test methodologies and new product characterization and...

The LUX 3030 and 2835 from Luminus Devices are LEDs with KSF narrow-band red phosphor technology. The LEDs deliver a 120° typical viewing angle and minimum 90 color rendering index (CRI) with a...

The series of colored LEDs from ams OSRAM are RGB versions of the previously released OSTAR® Projection Compact LEDs. Using a 2-mm² chip, the LEDs have a high luminous output, with the...

The MapROVER™ (shown) and SteerROVER™ from Evident Corporation are phased array inspection solutions for weld and corrosion inspections. The MapROVER includes an electronic cooling system...

The LHI-DO Lightgistics series light from Smart Vision Lights is a machine vision light designed to deliver intense linear light in high-speed scan tunnel systems. Equipped with hidden strobe...

In the beginning, automated inspection focused on the camera and optics, the algorithms, the interface hardware and the processor. Only rarely was attention paid to the lighting system or lighting...

The use and importance of colorimetry has grown in unison with the increase of global manufacturing and processing. When plastic automotive trim produced on one continent must match a painted metal...

The wavelength range of commercially available LEDs with single-element output power of at least 5 mW is 275 to 950 nm. Each wavelength range is made from a specific semiconductor material family,...

An integrating sphere’s function is to spatially integrate radiant flux (light). However, before one can optimize a sphere design for a particular application, it is important to understand how...

Answering some common questions new users of optical design and analysis software have are “How accurate are the results?” or “Can I trust the results I get?” and discussing the importance of...

The optoelectronic properties of an OLED device are mapped using an RMS1000 Confocal Raman Microscope in spectral and time-resolved photoluminescence and electroluminescence imaging modes. These...

OEM dpss laser from lumispot tech, in this file, we mentioned the datasheet of the cw and qcw diode pumped solid state lasers, including its features, working principle and applications.

In the rapidly evolving world of industrial machine vision, hyperspectral imaging (HSI) has emerged as an invaluable tool, offering a wealth of information for various applications. This white paper...

Fluorescence imaging in life sciences and microscopy applications has traditionally used mercury, metal halide, and xenon arc lamps for illumination. With advances in technology, LEDs are now able to...

This event is supported by the European initiatives presented and is moderated by EPIC, the European Photonics Industry Consortium. The European Commission is helping companies access the...

Light can be used to understand, study, and spectroscopically characterize the many components that may exist in water. Stephanie Butron and Eric Mesa of Hamamatsu Corp. discuss the various markets...

A new generation of visible laser light sources is being developed to enable advanced optical control through the use of miniature optics and reflectors, high-efficiency fiber optic transport, and...

Gallium nitride-based light-emitting diodes (GaN-based LEDs) are semiconductor devices that emit light when an electric current passes through them. These LEDs are constructed using gallium nitride...

An LED, or light emitting diode, is a semiconductor device that emits light when an electric current passes through it. LEDs are widely used in various applications due to their energy efficiency,...

A GaAlAs laser is a type of semiconductor laser diode that emits light in the near-infrared region of the electromagnetic spectrum. It is composed of layers of gallium, aluminum, and arsenic, hence...

A fiber-coupled LED (light-emitting diode) refers to an LED device that is optically coupled to an optical fiber for the purpose of efficient light transmission. In this configuration, the LED serves...

On this month's episode of Light Matters, we introduce you to a green energy company that is transforming China's national treasure — the giant panda — into panda-shaped solar farms. We also bring...

In this month's Light Matters Extra, we take you to the Quantum Photonics Laboratory at MIT run by Dr. Dirk Englund. Dr. Englund's group, the Quantum Photonics Group, is made up of postdocs and...

On this month's episode of Light Matters, we take you to the South by Southwest (SXSW) Trade Show in Austin, Texas, as new photonics innovations hit the show floor of the Austin Convention Center....

On this month's episode of Light Matters, we take you on a brief tour of the Higgins Laboratories at Worcester Polytechnic Institute (WPI). Quinsigamond Community College and WPI received a $4M grant...

The LaCroix name is synonymous with quality precision optics. Since 1947, three generations of family leadership have guided LaCroix Precision Optics to become the premier precision optics...

Excelitas Technologies® Corp. is a leading industrial technology manufacturer focused on delivering innovative, market-driven photonic solutions to meet the illumination, optical, optronic,...

Teledyne DALSA is a part of Teledyne’s Vision Solutions group and a leader in the design, manufacture, and deployment of digital imaging components for machine vision. Teledyne DALSA image...

Baumer Group is a manufacturer of sensors, encoders, measuring instruments, and components for automated image processing. Baumer combines innovative technologies and customer-oriented service into...