MCT Reports $1.6 Million Order for Semiconductor Test Systems

Researchers at Hefei University of Technology have demonstrated the use of laser-induced breakdown spectroscopy (LIBS) to automatically identify, classify, and subclassify recyclable waste in real...

Courtesy of iStock.com/MotoEd. After years of investment and research, light-emitting diodes (LEDs) are cheaper and brighter than ever before, and they consume less power. With reliability...

Using a superconducting nanowire single-photon detector (SNSPD) as the light-sensing element, researchers from Tianjin University demonstrated non-line-of-sight (NLOS) imaging at two infrared (IR)...

Researchers at the National Institute of Standards and Technology (NIST) have developed a way to measure the 3D orientation of molecules within a material made of polymers. The measurement technique...

The C5-2040CS 3D compact sensor from Automation Technology GmbH is designed for the inspection of beverage containers. The sensor can be used as an all-rounder for both bottle and can...

The FSP 3000 M-Flex800™ from Adtran is a multirate line card for ZR and ZR+ optics that can address issues in IP-over-DWDM solutions. Designed to meet the connectivity needs of telecom...

The Ophir® FoldIR 30 - 450 mm f/3.4 continuous zoom lens from MKS Instruments Inc. is a long-range, compact folded optics IR zoom lens for gimbal systems and payloads in air-land-sea...

The TDLS8220 from Yokogawa Corporation of America is an extractive tunable diode laser spectrometer for extractive oxygen measurements where in-situ or probe-type installations are not applicable....

The use and importance of colorimetry has grown in unison with the increase of global manufacturing and processing. When plastic automotive trim produced on one continent must match a painted metal...

The use of precision polymer optics is becoming an increasing necessity today as products demand sophisticated light handling components to achieve desired results. Polymer optics can be thought of...

Over 60 years have passed since the first demonstration of a laser in 1960. After the initial spark of interest, lasers were for a while categorized as “a solution waiting for a problem,”...

There is a growing market for imaging systems that provides an immediate, slow-motion view of a process that allows one to see events that happen too quickly for the human eye to perceive or...

The ISO 10110 & material cheat sheet assists optical designers in specifying their optical prints according to the ISO 10110 optics drawing standards. This cheat sheet comprises two sections, namely...

The optical manufacturing tolerance chart outlines the general tolerance limits for spherical and aspherical lenses that we can accommodate. It also acts as a valuable reference tool when designing a...

MKS Newport spectral optics product overview providing a summary of competencies in diffraction gratings, optical filters, optical mirrors, OptoFlash multichannel spectrometer engines, and design &...

In the rapidly evolving world of industrial machine vision, hyperspectral imaging (HSI) has emerged as an invaluable tool, offering a wealth of information for various applications. This white paper...

Quantum entanglement occurs when two photons remain connected, even over large distances, such that actions performed on the quantum state of one have an instant effect on the other. Studying this...

Portable and hand-held spectrometers have matured, and in the past few years hand-held devices targeted to the general consumer market have been introduced. This webinar will survey the portable...

Since the introduction of the first frequency-domain fluorescence lifetime imaging microscopy (FD-FLIM) pco.flim camera in 2014, this camera system has been applied to many different areas, from FRET...

From LEDs to medical devices to microelectronics to fiber optics — everything leaks! This 40-minute webinar, presented by Agilent Technologies, will describe the challenges of locating and...

An infrared detector is a device that is used to detect and measure infrared radiation, which lies beyond the visible spectrum of light. These detectors are utilized in various applications,...

A helium-neon (HeNe) laser is a type of gas laser that emits visible red light at a wavelength of 632.8 nm. It operates based on the principle of stimulated emission of photons from excited helium...

A CMOS camera refers to an imaging device that employs a complementary metal-oxide-semiconductor (CMOS) image sensor to capture digital images. CMOS cameras have become ubiquitous due to their low...

Turbidity is a measure of the cloudiness or haziness of a fluid caused by the presence of suspended particles. These particles can include sediment, silt, clay, plankton, and other microscopic...

Check out our new video tutorial on how to clean spherical lenses! Our latest video breaks down the step-by-step process for effectively cleaning spherical lenses, ensuring crystal-clear images every...

For more information, please follow our SOCIALS: Linkedin YoutubeFacebook Twitter Website Email

Optical coatings modify the reflectance, transmittance, and absorptive properties of optic substrates to make them much more efficient and functional. From an optical manufacturer's perspective,...

Aspheres have allowed optical designers to create systems and products that push the limitations of performance across several fields. In this presentation, we will explain the various processes...

A beam positioner is a device (e.g., prisms, lenses, tubes) used to align a beam in a system.

A fiber laser is a type of laser in which the active gain medium is an optical fiber doped with rare-earth ions such as erbium, ytterbium, or neodymium. Fiber lasers generate coherent light through...

The LaCroix name is synonymous with quality precision optics. Since 1947, three generations of family leadership have guided LaCroix Precision Optics to become the premier precision optics...

Baumer Group is a manufacturer of sensors, encoders, measuring instruments, and components for automated image processing. Baumer combines innovative technologies and customer-oriented service into...

Teledyne DALSA is a part of Teledyne’s Vision Solutions group and a leader in the design, manufacture, and deployment of digital imaging components for machine vision. Teledyne DALSA image...

With offices in Germany and the US, XIMEA develops and manufactures scientific and industrial cameras with CCD, CMOS, and sCMOS that utilize USB, and PCI Express (PCIe) interfaces. Applications...