Search Menu
Photonics Media Photonics Buyers' Guide Photonics EDU Photonics Spectra BioPhotonics EuroPhotonics Industrial Photonics Photonics Showcase Photonics ProdSpec Photonics Handbook
More News
Email Facebook Twitter Google+ LinkedIn

OPB732 Infrared Switch
Dec 2009
Optek Technology, Industrial Sensing & ControlRequest Info
Noncontact Infrared Reflective Switch
CARROLLTON, Texas, Dec. 1, 2009 – Providing alternative energy design engineers with a means of reliably and accurately detecting the speed of wind turbines, TT electronics Optek Technology Inc.’s OPB732 series long-distance infrared reflective switch has been employed in a 6-kW wind turbine for revolutions-per-minute (RPM) sensing. Placed at the turbine rotor, the switch is used internally to sense RPMs, and that data is then transmitted to a customer-accessible Web site via General Packet Radio Service.

Optek_ReflectiveSwitch.jpgWith its noncontact design, which features an emitter and a sensor protected from contaminants by a clear window, the reflective switch provides the reliability and accuracy necessary for monitoring turbine RPMs. It also is suitable for use in assembly line and machine automation, equipment security, door sensors, machine safety, end of travel sensors, and noncontact reflective object sensor applications.

Reflective distance is more than 25.4 mm, depending upon the circuitry. The switch configuration includes an infrared LED and phototransistor, and an opaque housing reduces the sensor’s ambient light sensitivity.

When infrared light strikes the phototransistor, it becomes forward-biased and is considered to be in the “on” state, providing an IC(ON) current proportional to the light striking the phototransistor. When the infrared light from the LED is not reflected to the phototransistor, the device turns “off,” minimizing the IC(ON) current.

The infrared LED features an 850-nm wavelength and power dissipation of 100 mW. Maximum forward current is 50 mA, and maximum forward voltage is 1.8 V. Reverse DC voltage is 3 V, with reverse current of 100 ?A. The output phototransistor features a collector-emitter voltage of 30 V, collector DC current of 50 mA, and power dissipation of 100 mW. Operating temperature range for the reflective switch is -40 o 85 ?C.

The OPB732 series assembly is offered with PC board through-hole pins or 0.61-m, 26 American wire gauge wires. The phototransistor can be configured as a common collector or common emitter device.

For more information, visit:  

TT electronics Optek Technology Inc.
1645 Wallace Drive
Carrollton, Texas 75006
Phone: (972) 323-2200
Fax: (972) 323-2396


* Message:
(requirements, questions for supplier)
Your contact information
* First Name:
* Last Name:
* Email Address:
* Company:
Address 2:
Postal Code:
* Country:
Phone #:
Fax #:

Register or login to auto-populate this form:
Login Register
* Required
assembly line automationdefensedoor sensorsend of travel sensorsequipment securitygreen photonicsimaginginfraredlight sourceslong-distancemachine automationmachine safetynoncontactopaqueOPB732Optekphotonicsphotonics.comphototransistorProductsreflectivereflective object sensorsRPM sensingSensors & DetectorsswitchTT electronicswind turbinesLEDs

Terms & Conditions Privacy Policy About Us Contact Us
back to top

Facebook Twitter Instagram LinkedIn YouTube RSS
©2018 Photonics Media
x We deliver – right to your inbox. Subscribe FREE to our newsletters.
Are you interested in this product?
If you'd like Optek Technology, Industrial Sensing & Control to reach out to you with more information about this product, please supply your email and they will contact you.

Email Address:
Stop showing me this for the remainder of my visit