LED Heat Sinks

The GP-CVM600P series of 600-W LED constant voltage drivers from GlacialPower include nondimming, 3-in-1, and DALI-2 dimming versions. The direct-current output voltages include 12, 24, 36, 48,...

The New Energy Light Module (NELM) from New Energy is built with CREE LEDs and is a replacement for the discontinued CREE LED LMH2s. A solution for area illumination and commercial lighting spaces,...

The GP-CVP075P-xxVH-T02 Series from GlacialPower are constant voltage LED drivers that have an AC phase-cut dimming feature. Covering demands for LED strip, neon flex, signage, and light box markets,...

The E11A Red, Brilliant Red and Green Direct Mountable Chips from Nichia Corp. are 1.1 × 1.1-mm high luminous flux density devices. The chip scale LEDs feature a compact fixture design...

Organic-based optoelectronics have the potential to provide an energy-efficient way to operate low-power indoor devices and wireless IoT sensors. Organic photovoltaic cells (OPVs) and organic...

With the advent of the IoT, there is increased need to display large amounts of information to people quickly and without distortion in all types of lighting conditions. Though transmissive and...

High resolution and high definition are key to delivering a realistic visual experience in augmented reality (AR) and other immersive technologies. Inexpensive micro-LEDs that enable full-color...

Compared to conventional light sources, such as OLEDs and LCDs, micro-LEDs — inorganic LED chips <100 μm in size — show superior reliability, stability, and optoelectronic...

In the beginning, automated inspection focused on the camera and optics, the algorithms, the interface hardware and the processor. Only rarely was attention paid to the lighting system or lighting...

An integrating sphere’s function is to spatially integrate radiant flux (light). However, before one can optimize a sphere design for a particular application, it is important to understand how...

Reflected-ultraviolet imaging is a rather mysterious area of the imaging field. There is relatively little actual UV imagery to be found on the Internet or in the literature compared to near-infrared...

An optical time-domain reflectometer sends short pulses of light into a fiber and measures its reflections as a function of time. The delay of these reflections to the detector as well as their...

Endoscopic classification in terms of application, can be divided into two simple categories, namely, industrial endoscope and medical endoscope. About the types of industrial endoscope, from the...

The optoelectronic properties of an OLED device are mapped using an RMS1000 Confocal Raman Microscope in spectral and time-resolved photoluminescence and electroluminescence imaging modes. These...

Understanding the interplay of optical filters, microscope light source and fluorophore selection can be a complex task, especially when it comes to multi-channel imaging. However, the selection of...

3m.i.k.r.o.n.™ is the technology platform for compact, efficient, fast and reliable lasers for a wide range of potential applications in the field of medical engineering and industry.

In today’s energy-challenged world, clean energy topics are increasingly important, particularly with solar cell designs reaching new efficiency breakthroughs. This webinar series shares the...

Lasers are made of physical matter. Therefore, the natural degradation of their materials can cause variability in performance. Aging optics often cause slow changes in laser behavior and, when left...

In today’s energy-challenged world, clean energy topics are increasingly important, particularly with solar cell designs reaching new efficiency breakthroughs. This webinar series shares the...

High-power diode lasers have progressed significantly since their first appearance in the market. Today, these lasers are able to utilize high power levels and high-percentage electro-optical...

Micro-LED (micro-light-emitting diode) refers to a technology that involves the use of very small light-emitting diodes to create displays and lighting systems. These LEDs are miniature versions of...

An LED, or light emitting diode, is a semiconductor device that emits light when an electric current passes through it. LEDs are widely used in various applications due to their energy efficiency,...

Chip-on-board (COB) lights refer to a type of LED lighting technology where multiple LED chips are directly mounted onto a substrate, typically a printed circuit board (PCB), without the need for...

Gallium nitride-based light-emitting diodes (GaN-based LEDs) are semiconductor devices that emit light when an electric current passes through them. These LEDs are constructed using gallium nitride...

On this month's episode of Light Matters, we introduce you to a green energy company that is transforming China's national treasure — the giant panda — into panda-shaped solar farms. We also bring...

Students from large and small size companies and bigger Department of Defense affiliates of the AIM Photonics Institute took part in the recent AIM Photonics Summer Academy at MIT. This was the third...

On this month's episode of Light Matters, we take you to the South by Southwest (SXSW) Trade Show in Austin, Texas, as new photonics innovations hit the show floor of the Austin Convention Center....

In this month's Light Matters Extra, we take you to the Quantum Photonics Laboratory at MIT run by Dr. Dirk Englund. Dr. Englund's group, the Quantum Photonics Group, is made up of postdocs and...

Excelitas Technologies® Corp. is a leading industrial technology manufacturer focused on delivering innovative, market-driven photonic solutions to meet the illumination, optical, optronic,...

Andor Technology Ltd is a global developer and manufacturer of high-performance scientific cameras, microscopy systems and spectrographs for academic, government, and industrial applications. Founded...

Precision Optical: our name embodies who we are. Since 1959, Precision Optical has earned a widely recognized reputation for reliability, value, and quality precision optics for the most demanding...

LaserPoint manufactures a wide portfolio of laser power and energy meters able to perform laser measurements with high accuracy. They developed the hard coatings to absorb the laser radiation which...